[U-Boot] [PATCH v3 07/12] i2c: omap: Modify code to work without CONFIG_I2C_HARD

[Heiko Schocher <hs@denx.de>]

Hello Simon,

Am 13.05.2017 um 05:09 schrieb Simon Glass:
> Drop use of this long-deprecated option.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> Suggested-by: Lokesh Vutla <lokeshvutla@ti.com>
> ---
>
> Changes in v3: None
> Changes in v2:
> - Add new patch to adjust omap boards to not need CONFIG_I2C_HARD
>
>   board/ti/am335x/board.c | 3 ++-
>   board/ti/am43xx/board.c | 3 ++-
>   2 files changed, 4 insertions(+), 2 deletions(-)

Thanks!

Applied to u-boot-i2c.git master

u-boot-i2c master just testing on travis:
https://travis-ci.org/hsdenx/u-boot-i2c/builds/232288665

bye,
Heiko
>
> diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
> index 3e81521399..517965c0f0 100644
> --- a/board/ti/am335x/board.c
> +++ b/board/ti/am335x/board.c
> @@ -72,7 +72,8 @@ void do_board_detect(void)
>   	enable_i2c0_pin_mux();
>   	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
>
> -	if (ti_i2c_eeprom_am_get(-1, CONFIG_SYS_I2C_EEPROM_ADDR))
> +	if (ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
> +				 CONFIG_EEPROM_CHIP_ADDRESS))
>   		printf("ti_i2c_eeprom_init failed\n");
>   }
>   #endif
> diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c
> index f633e2f85d..f44103d4d6 100644
> --- a/board/ti/am43xx/board.c
> +++ b/board/ti/am43xx/board.c
> @@ -42,7 +42,8 @@ static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
>   #ifdef CONFIG_TI_I2C_BOARD_DETECT
>   void do_board_detect(void)
>   {
> -	if (ti_i2c_eeprom_am_get(-1, CONFIG_SYS_I2C_EEPROM_ADDR))
> +	if (ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
> +				 CONFIG_EEPROM_CHIP_ADDRESS))
>   		printf("ti_i2c_eeprom_init failed\n");
>   }
>   #endif
>

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany