[U-Boot] [PATCH 02/47] Kconfig: Drop CONFIG_CMD_DS4510_INFO

[Heiko Schocher <hs@denx.de>]

Hello Simon,

Am 15.05.2017 um 12:57 schrieb Simon Glass:
> This option is only used in one driver and two boards. It does not seem
> worth having the ability to remove this part of the support.
>
> Drop the option.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
>   README                        | 1 -
>   drivers/misc/ds4510.c         | 8 --------
>   include/configs/xpedite517x.h | 1 -
>   include/configs/xpedite537x.h | 1 -
>   scripts/config_whitelist.txt  | 1 -
>   5 files changed, 12 deletions(-)

Reviewed-by: Heiko Schocher <hs@denx.de>

bye,
Heiko
>
> diff --git a/README b/README
> index 2ca0102b57..3c4f0165b1 100644
> --- a/README
> +++ b/README
> @@ -831,7 +831,6 @@ The following options need to be configured:
>   		CONFIG_CMD_DHCP		* DHCP support
>   		CONFIG_CMD_DIAG		* Diagnostics
>   		CONFIG_CMD_DS4510	* ds4510 I2C gpio commands
> -		CONFIG_CMD_DS4510_INFO	* ds4510 I2C info command
>   		CONFIG_CMD_DS4510_MEM	* ds4510 I2C eeprom/sram commansd
>   		CONFIG_CMD_DS4510_RST	* ds4510 I2C rst command
>   		CONFIG_CMD_DTT		* Digital Therm and Thermostat
> diff --git a/drivers/misc/ds4510.c b/drivers/misc/ds4510.c
> index d7c9bd73c8..940e2ce6a0 100644
> --- a/drivers/misc/ds4510.c
> +++ b/drivers/misc/ds4510.c
> @@ -186,7 +186,6 @@ int ds4510_gpio_read_val(uint8_t chip)
>   }
>
>   #ifdef CONFIG_CMD_DS4510
> -#ifdef CONFIG_CMD_DS4510_INFO
>   /*
>    * Display DS4510 information
>    */
> @@ -240,7 +239,6 @@ static int ds4510_info(uint8_t chip)
>
>   	return 0;
>   }
> -#endif /* CONFIG_CMD_DS4510_INFO */
>
>   cmd_tbl_t cmd_ds4510[] = {
>   	U_BOOT_CMD_MKENT(device, 3, 0, (void *)DS4510_CMD_DEVICE, "", ""),
> @@ -248,9 +246,7 @@ cmd_tbl_t cmd_ds4510[] = {
>   	U_BOOT_CMD_MKENT(output, 4, 0, (void *)DS4510_CMD_OUTPUT, "", ""),
>   	U_BOOT_CMD_MKENT(input, 3, 0, (void *)DS4510_CMD_INPUT, "", ""),
>   	U_BOOT_CMD_MKENT(pullup, 4, 0, (void *)DS4510_CMD_PULLUP, "", ""),
> -#ifdef CONFIG_CMD_DS4510_INFO
>   	U_BOOT_CMD_MKENT(info, 2, 0, (void *)DS4510_CMD_INFO, "", ""),
> -#endif
>   #ifdef CONFIG_CMD_DS4510_RST
>   	U_BOOT_CMD_MKENT(rstdelay, 3, 0, (void *)DS4510_CMD_RSTDELAY, "", ""),
>   #endif
> @@ -324,10 +320,8 @@ int do_ds4510(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
>   		else
>   			tmp &= ~(1 << ul_arg2);
>   		return ds4510_pullup_write(chip, tmp);
> -#ifdef CONFIG_CMD_DS4510_INFO
>   	case DS4510_CMD_INFO:
>   		return ds4510_info(chip);
> -#endif
>   #ifdef CONFIG_CMD_DS4510_RST
>   	case DS4510_CMD_RSTDELAY:
>   		return ds4510_rstdelay_write(chip, ul_arg2);
> @@ -378,10 +372,8 @@ U_BOOT_CMD(
>   	"ds4510 eeprom/seeprom/sram/gpio access",
>   	"device [dev]\n"
>   	"	- show or set current device address\n"
> -#ifdef CONFIG_CMD_DS4510_INFO
>   	"ds4510 info\n"
>   	"	- display ds4510 info\n"
> -#endif
>   	"ds4510 output pin 0|1\n"
>   	"	- set pin low or high-Z\n"
>   	"ds4510 input pin\n"
> diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h
> index 447fd9557a..dae61b11e4 100644
> --- a/include/configs/xpedite517x.h
> +++ b/include/configs/xpedite517x.h
> @@ -503,7 +503,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
>    * Command configuration.
>    */
>   #define CONFIG_CMD_DS4510
> -#define CONFIG_CMD_DS4510_INFO
>   #define CONFIG_CMD_DTT
>   #define CONFIG_CMD_EEPROM
>   #define CONFIG_CMD_IRQ
> diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h
> index 48f07b08c0..ce1ff86135 100644
> --- a/include/configs/xpedite537x.h
> +++ b/include/configs/xpedite537x.h
> @@ -355,7 +355,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
>    * Command configuration.
>    */
>   #define CONFIG_CMD_DS4510
> -#define CONFIG_CMD_DS4510_INFO
>   #define CONFIG_CMD_DTT
>   #define CONFIG_CMD_EEPROM
>   #define CONFIG_CMD_JFFS2
> diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
> index 7646bb6842..b4c3d6b311 100644
> --- a/scripts/config_whitelist.txt
> +++ b/scripts/config_whitelist.txt
> @@ -385,7 +385,6 @@ CONFIG_CMDLINE_EDITING
>   CONFIG_CMDLINE_PS_SUPPORT
>   CONFIG_CMDLINE_TAG
>   CONFIG_CMD_DS4510
> -CONFIG_CMD_DS4510_INFO
>   CONFIG_CMD_DS4510_MEM
>   CONFIG_CMD_DS4510_RST
>   CONFIG_CMD_DTT
>

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany