[U-Boot] [PATCH 07/47] Kconfig: Drop CONFIG_SYS_I2C_DTT_ADDR

[Heiko Schocher <hs@denx.de>]

Hello Simon,

Am 15.05.2017 um 12:57 schrieb Simon Glass:
> This option is only defined to a non-default value by canyonlands, which
> needs conversion to driver model (where the I2C address would be defined
> by the device tree).
>
> Drop this option.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
>   README                        | 6 ------
>   drivers/hwmon/ds1775.c        | 2 +-
>   drivers/hwmon/lm75.c          | 4 ----
>   include/configs/canyonlands.h | 4 ----
>   include/configs/kilauea.h     | 1 -
>   include/configs/makalu.h      | 1 -
>   scripts/config_whitelist.txt  | 1 -
>   7 files changed, 1 insertion(+), 18 deletions(-)

Reviewed-by: Heiko Schocher <hs@denx.de>

bye,
Heiko
>
> diff --git a/README b/README
> index ace492edde..0e6ed53736 100644
> --- a/README
> +++ b/README
> @@ -2391,12 +2391,6 @@ The following options need to be configured:
>   		If defined, then this indicates the I2C bus number for the DTT.
>   		If not defined, then U-Boot assumes that DTT is on I2C bus 0.
>
> -		CONFIG_SYS_I2C_DTT_ADDR:
> -
> -		If defined, specifies the I2C address of the DTT device.
> -		If not defined, then U-Boot uses predefined value for
> -		specified DTT device.
> -
>   		CONFIG_SOFT_I2C_READ_REPEATED_START
>
>   		defining this will force the i2c_read() function in
> diff --git a/drivers/hwmon/ds1775.c b/drivers/hwmon/ds1775.c
> index b95b130d92..4c0c0b82a0 100644
> --- a/drivers/hwmon/ds1775.c
> +++ b/drivers/hwmon/ds1775.c
> @@ -11,7 +11,7 @@
>   #include <i2c.h>
>   #include <dtt.h>
>
> -#define DTT_I2C_DEV_CODE	CONFIG_SYS_I2C_DTT_ADDR /* Dallas Semi's DS1775 device code */
> +#define DTT_I2C_DEV_CODE	0x48 /* Dallas Semi's DS1775 device code */
>   #define DTT_READ_TEMP		0x0
>   #define DTT_CONFIG		0x1
>   #define DTT_TEMP_HYST		0x2
> diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
> index 462f902dad..aafa4757b1 100644
> --- a/drivers/hwmon/lm75.c
> +++ b/drivers/hwmon/lm75.c
> @@ -16,11 +16,7 @@
>   /*
>    * Device code
>    */
> -#if defined(CONFIG_SYS_I2C_DTT_ADDR)
> -#define DTT_I2C_DEV_CODE CONFIG_SYS_I2C_DTT_ADDR
> -#else
>   #define DTT_I2C_DEV_CODE 0x48			/* ON Semi's LM75 device */
> -#endif
>   #define DTT_READ_TEMP		0x0
>   #define DTT_CONFIG		0x1
>   #define DTT_TEMP_HYST		0x2
> diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h
> index a330372d19..ea440d6e16 100644
> --- a/include/configs/canyonlands.h
> +++ b/include/configs/canyonlands.h
> @@ -269,10 +269,6 @@
>   #define CONFIG_SYS_DTT_LOW_TEMP	-30
>   #define CONFIG_SYS_DTT_HYSTERESIS	3
>
> -#if defined(CONFIG_ARCHES)
> -#define CONFIG_SYS_I2C_DTT_ADDR	0x4a		/* AD7414 I2C address	*/
> -#endif
> -
>   #if !defined(CONFIG_ARCHES)
>   /* RTC configuration */
>   #define CONFIG_RTC_M41T62
> diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h
> index 1f5c2ad234..b8c0d0d8f0 100644
> --- a/include/configs/kilauea.h
> +++ b/include/configs/kilauea.h
> @@ -320,7 +320,6 @@
>   /* Standard DTT sensor configuration */
>   #define CONFIG_DTT_DS1775	1
>   #define CONFIG_DTT_SENSORS	{ 0 }
> -#define CONFIG_SYS_I2C_DTT_ADDR	0x48
>
>   /* RTC configuration */
>   #define CONFIG_RTC_DS1338	1
> diff --git a/include/configs/makalu.h b/include/configs/makalu.h
> index da5cfa19d3..cdb02f3693 100644
> --- a/include/configs/makalu.h
> +++ b/include/configs/makalu.h
> @@ -192,7 +192,6 @@
>   /* Standard DTT sensor configuration */
>   #define CONFIG_DTT_DS1775	1
>   #define CONFIG_DTT_SENSORS	{ 0 }
> -#define CONFIG_SYS_I2C_DTT_ADDR	0x48
>
>   /* RTC configuration */
>   #define CONFIG_RTC_X1205	1
> diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
> index 85ab8f8933..e39fa2520e 100644
> --- a/scripts/config_whitelist.txt
> +++ b/scripts/config_whitelist.txt
> @@ -4232,7 +4232,6 @@ CONFIG_SYS_I2C_DSPIC_2_ADDR
>   CONFIG_SYS_I2C_DSPIC_ADDR
>   CONFIG_SYS_I2C_DSPIC_IO_ADDR
>   CONFIG_SYS_I2C_DSPIC_KEYB_ADDR
> -CONFIG_SYS_I2C_DTT_ADDR
>   CONFIG_SYS_I2C_DVI_ADDR
>   CONFIG_SYS_I2C_DVI_BUS_NUM
>   CONFIG_SYS_I2C_EARLY_INIT
>

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany