public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Ziyuan <xzy.xu@rock-chips.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 01/33] mmc: select the available type from host_caps and card_caps
Date: Thu, 25 May 2017 16:12:45 +0800	[thread overview]
Message-ID: <592691FD.101@rock-chips.com> (raw)
In-Reply-To: <9dcd15a4-12b9-459a-de46-93a8062a7362@samsung.com>

hi Jaehoon,

On 05/16/2017 09:55 AM, Jaehoon Chung wrote:
> Hi Ziyuan,
>
> On 05/16/2017 10:15 AM, Ziyuan wrote:
>> hi Simon & Jaehoon,
>>
>> On 05/16/2017 08:18 AM, Simon Glass wrote:
>>> Hi Ziyuan,
>>>
>>> On 15 May 2017 at 00:06, Ziyuan Xu <xzy.xu@rock-chips.com> wrote:
>>>> The original implementation select HS timing by default, add available
>>>> type selection for higher speed mode compatibility, such as hs200,
>>>> hs400, hs400es.
>>>>
>>>> By the way, we assume that card run at 1.8V or 1.2V I/O when its timing
>>>> is ddr52/hs200/hs400(es).
>>>>
>>>> Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
>>>> ---
>>>>
>>>>    drivers/mmc/mmc.c | 59 ++++++++++++++++++++++++++++++++++++++++++++++++++++++-
>>>>    include/mmc.h     | 16 +++++++++++++++
>>>>    2 files changed, 74 insertions(+), 1 deletion(-)
>>>>
>>> Is there a cover letter for this series, please?
>> This patchset is used for hs200/hs400/ddr52 mode of eMMC device, and fixes some bug for dw_mmc & sdhci controller.
>> It's only valid in U-Boot stage, we still use 'High Speed' in SPL.
>>
>> I tested it on evb-rk3288 board(eMMC 4.5) and evb-rk3388 board(eMMC 5.0).
>>> I just reviewed an MMC series at add higher speed support. I'm not
>>> sure but I suspect these overlap.
>> Ha, I just reviewed Vignesh's patches, it focuses on uhs mode of sd card. It looks to me.
>> But some details are not the same as mine. Anyway, what do you think?
> I didn't review both yet..After checking, i will share my opinion. how about?

*ping*...
Did you test this patchset on Samsung platform? As far as I know, 
Samsung SoCs also make use of dw_mmc and sdhci controllers.

>
>>> Regards,
>>> Simon
>>>
>>>
>>>
>>
>>
>>
>>
>
>
>

  parent reply	other threads:[~2017-05-25  8:12 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-15  6:06 [U-Boot] [PATCH 01/33] mmc: select the available type from host_caps and card_caps Ziyuan Xu
2017-05-15  6:06 ` [U-Boot] [PATCH 02/33] mmc: add set_timing entry for timing selection Ziyuan Xu
2017-05-15  6:06 ` [U-Boot] [PATCH 03/33] mmc: xenon_sdhci: drop redundant timing definitions Ziyuan Xu
2017-05-15  6:06 ` [U-Boot] [PATCH 04/33] mmc: rework high speed mode selection Ziyuan Xu
2017-05-15  6:06 ` [U-Boot] [PATCH 05/33] mmc: sdhci: fix HISPD bit setting Ziyuan Xu
2017-05-15  6:07 ` [U-Boot] [PATCH 06/33] mmc: add card_busy to query card status Ziyuan Xu
2017-05-25 13:02   ` Jaehoon Chung
2017-05-15  6:07 ` [U-Boot] [PATCH 07/33] mmc: dw_mmc: implement card_busy detection Ziyuan Xu
2017-05-15  6:07 ` [U-Boot] [PATCH 08/33] mmc: sdhci: " Ziyuan Xu
2017-05-15  6:07 ` [U-Boot] [PATCH 09/33] mmc: rework mmc_switch for non-send_status scenario Ziyuan Xu
2017-05-15  6:07 ` [U-Boot] [PATCH 10/33] mmc: add support for HS200 mode of eMMC4.5 Ziyuan Xu
2017-05-15  6:07 ` [U-Boot] [PATCH 11/33] mmc: rework ddr mode judgement with timing Ziyuan Xu
2017-05-15  6:07 ` [U-Boot] [PATCH 12/33] mmc: remove tran_speed from struct mmc Ziyuan Xu
2017-05-15  6:07 ` [U-Boot] [PATCH 13/33] cmd: mmc: show the current speed mode Ziyuan Xu
2017-05-15  6:07 ` [U-Boot] [PATCH 14/33] clk: introduce clk_phase get/set function & callback Ziyuan Xu
2017-05-15  6:07 ` [U-Boot] [PATCH 15/33] rockchip: clk: rk3288: fix mmc clock setting Ziyuan Xu
2017-05-15  6:07 ` [U-Boot] [PATCH 16/33] rockchip: clk: rk3288: add support for the clock phase Ziyuan Xu
2017-05-15  6:07 ` [U-Boot] [PATCH 17/33] rockchip: clk: rk3399: fix emmc clock setting Ziyuan Xu
2017-05-15  6:07 ` [U-Boot] [PATCH 18/33] mmc: dw_mmc: add the support for the tuning scheme Ziyuan Xu
2017-05-15  6:07 ` [U-Boot] [PATCH 19/33] mmc: dw_mmc: rockchip: implement tuning with clock phase framework Ziyuan Xu
2017-05-15  6:07 ` [U-Boot] [PATCH 20/33] mmc: dw_mmc: reset controller after data error Ziyuan Xu
2017-05-15  6:07 ` [U-Boot] [PATCH 21/33] mmc: add DDR52 support for eMMC card Ziyuan Xu
2017-05-15  6:07 ` [U-Boot] [PATCH 22/33] mmc: dw_mmc: rockchip: fix data crc error on ddr52 8bit mode Ziyuan Xu
2017-05-15  6:07 ` [U-Boot] [PATCH 23/33] mmc: dw_mmc: fix bus width setting Ziyuan Xu
2017-05-15  6:07 ` [U-Boot] [PATCH 24/33] mmc: sdhci: rockchip: " Ziyuan Xu
2017-05-15  6:07 ` [U-Boot] [PATCH 25/33] mmc: sdhci: update host->clock after clock setting Ziyuan Xu
2017-05-15  6:07 ` [U-Boot] [PATCH 26/33] mmc: sdhci: add support for UHS timing Ziyuan Xu
2017-05-15  6:07 ` [U-Boot] [PATCH 27/33] mmc: sdhci: rename set_clock callback Ziyuan Xu
2017-05-15  6:07 ` [U-Boot] [PATCH 28/33] mmc: sdhci: export sdhci_set_clock() Ziyuan Xu
2017-05-15  6:07 ` [U-Boot] [PATCH 29/33] mmc: sdhci: rockchip: add phy support Ziyuan Xu
2017-05-15  6:07 ` [U-Boot] [PATCH 30/33] mmc: sdhci: add the support for tuning Ziyuan Xu
2017-05-15  6:07 ` [U-Boot] [PATCH 31/33] mmc: add support for HS400 mode of eMMC5.0 Ziyuan Xu
2017-05-15  6:07 ` [U-Boot] [PATCH 32/33] dts: rk3399: change the maximum eMMC clock frequency to 150MHz Ziyuan Xu
2017-05-15  6:07 ` [U-Boot] [PATCH 33/33] SPL: tiny-printf: add "X" modifier Ziyuan Xu
2017-05-16  0:18 ` [U-Boot] [PATCH 01/33] mmc: select the available type from host_caps and card_caps Simon Glass
2017-05-16  1:15   ` Ziyuan
2017-05-16  1:55     ` Jaehoon Chung
2017-05-16  2:22       ` Ziyuan
2017-05-25  8:12       ` Ziyuan [this message]
2017-05-25 10:50         ` Jaehoon Chung
2017-05-25 13:08         ` Jaehoon Chung
2017-06-05  0:50           ` Ziyuan
2017-06-05  1:13             ` Jaehoon Chung
2017-05-17  1:38     ` Simon Glass
  -- strict thread matches above, loose matches on Subject: below --
2017-05-15  5:56 Ziyuan Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=592691FD.101@rock-chips.com \
    --to=xzy.xu@rock-chips.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox