[U-Boot] [PATCH v1] avr32: Retire AVR32 for good

Andy Shevchenko
2017-07-04T16:25:43Z

AVR32 is gone. It's already more than two years for no support in Buildroot,
even longer there is no support in GCC (last version is heavily patched 4.2.4).

Linux kernel v4.12 got rid of it (and v4.11 didn't build successfully).

There is no good point to keep this support in U-Boot either.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
.travis.yml | 6 +-
MAINTAINERS | 6 -
README | 8 +-
arch/Kconfig | 5 -
arch/avr32/Kconfig | 30 ---
arch/avr32/Makefile | 8 -
arch/avr32/config.mk | 17 --
arch/avr32/cpu/Makefile | 21 --
arch/avr32/cpu/at32ap700x/Makefile | 7 -
arch/avr32/cpu/at32ap700x/clk.c | 82 ------
arch/avr32/cpu/at32ap700x/mmu.c | 78 ------
arch/avr32/cpu/at32ap700x/portmux.c | 278 --------------------
arch/avr32/cpu/at32ap700x/sm.h | 204 ---------------
arch/avr32/cpu/cache.c | 81 ------
arch/avr32/cpu/config.mk | 6 -
arch/avr32/cpu/cpu.c | 73 ------
arch/avr32/cpu/exception.c | 108 --------
arch/avr32/cpu/hsdramc.c | 101 --------
arch/avr32/cpu/hsdramc1.h | 143 -----------
arch/avr32/cpu/hsmc3.h | 126 ---------
arch/avr32/cpu/interrupts.c | 112 --------
arch/avr32/cpu/mmc.c | 16 --
arch/avr32/cpu/portmux-gpio.c | 91 -------
arch/avr32/cpu/portmux-pio.c | 76 ------
arch/avr32/cpu/start.S | 268 --------------------
arch/avr32/cpu/u-boot.lds | 58 -----
arch/avr32/include/asm/arch-at32ap700x/addrspace.h | 65 -----
.../avr32/include/asm/arch-at32ap700x/cacheflush.h | 65 -----
.../include/asm/arch-at32ap700x/chip-features.h | 24 --
arch/avr32/include/asm/arch-at32ap700x/clk.h | 175 -------------
arch/avr32/include/asm/arch-at32ap700x/gpio.h | 48 ----
arch/avr32/include/asm/arch-at32ap700x/hardware.h | 70 -----
arch/avr32/include/asm/arch-at32ap700x/hmatrix.h | 45 ----
arch/avr32/include/asm/arch-at32ap700x/mmu.h | 66 -----
arch/avr32/include/asm/arch-at32ap700x/portmux.h | 76 ------
arch/avr32/include/asm/arch-common/portmux-pio.h | 122 ---------
arch/avr32/include/asm/bitops.h | 14 -
arch/avr32/include/asm/byteorder.h | 21 --
arch/avr32/include/asm/cache.h | 25 --
arch/avr32/include/asm/config.h | 13 -
arch/avr32/include/asm/dma-mapping.h | 55 ----
arch/avr32/include/asm/global_data.h | 18 --
arch/avr32/include/asm/hmatrix-common.h | 115 ---------
arch/avr32/include/asm/io.h | 77 ------
arch/avr32/include/asm/linkage.h | 0
arch/avr32/include/asm/posix_types.h | 128 ----------
arch/avr32/include/asm/processor.h | 81 ------
arch/avr32/include/asm/ptrace.h | 132 ----------
arch/avr32/include/asm/sdram.h | 37 ---
arch/avr32/include/asm/sections.h | 16 --
arch/avr32/include/asm/setup.h | 134 ----------
arch/avr32/include/asm/string.h | 12 -
arch/avr32/include/asm/sysreg.h | 281 ---------------------
arch/avr32/include/asm/types.h | 71 ------
arch/avr32/include/asm/u-boot.h | 18 --
arch/avr32/include/asm/unaligned.h | 1 -
arch/avr32/lib/Makefile | 13 -
arch/avr32/lib/bootm.c | 213 ----------------
arch/avr32/lib/dram_init.c | 17 --
arch/avr32/lib/interrupts.c | 35 ---
arch/avr32/lib/memset.S | 65 -----
board/atmel/atngw100/Kconfig | 15 --
board/atmel/atngw100/MAINTAINERS | 6 -
board/atmel/atngw100/Makefile | 6 -
board/atmel/atngw100/atngw100.c | 109 --------
board/atmel/atngw100mkii/Kconfig | 15 --
board/atmel/atngw100mkii/MAINTAINERS | 6 -
board/atmel/atngw100mkii/Makefile | 6 -
board/atmel/atngw100mkii/atngw100mkii.c | 125 ---------
board/atmel/atstk1000/Kconfig | 15 --
board/atmel/atstk1000/MAINTAINERS | 6 -
board/atmel/atstk1000/Makefile | 9 -
board/atmel/atstk1000/atstk1000.c | 89 -------
cmd/bdinfo.c | 11 -
common/board_r.c | 13 +-
configs/atngw100_defconfig | 26 --
configs/atngw100mkii_defconfig | 26 --
configs/atstk1002_defconfig | 22 --
configs/grasshopper_defconfig | 18 --
doc/README.AVR32 | 25 --
doc/README.AVR32-port-muxing | 208 ---------------
doc/README.atmel_mci | 3 +-
doc/README.scrapyard | 6 -
doc/git-mailrc | 3 +-
drivers/i2c/soft_i2c.c | 5 +-
drivers/spi/Kconfig | 4 +-
drivers/usb/gadget/atmel_usba_udc.h | 5 -
drivers/usb/musb-new/musb_io.h | 2 +-
drivers/video/atmel_lcdfb.c | 4 -
drivers/video/cfb_console.c | 2 +-
examples/standalone/stubs.c | 13 -
include/asm-generic/u-boot.h | 4 -
include/configs/atngw100.h | 129 ----------
include/configs/atngw100mkii.h | 150 -----------
include/configs/atstk1002.h | 148 -----------
include/linux/fb.h | 2 +-
include/linux/stat.h | 4 +-
scripts/checkstack.pl | 5 -
scripts/config_whitelist.txt | 5 -
tools/buildman/README | 11 +-
tools/moveconfig.py | 1 -
101 files changed, 20 insertions(+), 5599 deletions(-)
delete mode 100644 arch/avr32/Kconfig
delete mode 100644 arch/avr32/Makefile
delete mode 100644 arch/avr32/config.mk
delete mode 100644 arch/avr32/cpu/Makefile
delete mode 100644 arch/avr32/cpu/at32ap700x/Makefile
delete mode 100644 arch/avr32/cpu/at32ap700x/clk.c
delete mode 100644 arch/avr32/cpu/at32ap700x/mmu.c
delete mode 100644 arch/avr32/cpu/at32ap700x/portmux.c
delete mode 100644 arch/avr32/cpu/at32ap700x/sm.h
delete mode 100644 arch/avr32/cpu/cache.c
delete mode 100644 arch/avr32/cpu/config.mk
delete mode 100644 arch/avr32/cpu/cpu.c
delete mode 100644 arch/avr32/cpu/exception.c
delete mode 100644 arch/avr32/cpu/hsdramc.c
delete mode 100644 arch/avr32/cpu/hsdramc1.h
delete mode 100644 arch/avr32/cpu/hsmc3.h
delete mode 100644 arch/avr32/cpu/interrupts.c
delete mode 100644 arch/avr32/cpu/mmc.c
delete mode 100644 arch/avr32/cpu/portmux-gpio.c
delete mode 100644 arch/avr32/cpu/portmux-pio.c
delete mode 100644 arch/avr32/cpu/start.S
delete mode 100644 arch/avr32/cpu/u-boot.lds
delete mode 100644 arch/avr32/include/asm/arch-at32ap700x/addrspace.h
delete mode 100644 arch/avr32/include/asm/arch-at32ap700x/cacheflush.h
delete mode 100644 arch/avr32/include/asm/arch-at32ap700x/chip-features.h
delete mode 100644 arch/avr32/include/asm/arch-at32ap700x/clk.h
delete mode 100644 arch/avr32/include/asm/arch-at32ap700x/gpio.h
delete mode 100644 arch/avr32/include/asm/arch-at32ap700x/hardware.h
delete mode 100644 arch/avr32/include/asm/arch-at32ap700x/hmatrix.h
delete mode 100644 arch/avr32/include/asm/arch-at32ap700x/mmu.h
delete mode 100644 arch/avr32/include/asm/arch-at32ap700x/portmux.h
delete mode 100644 arch/avr32/include/asm/arch-common/portmux-pio.h
delete mode 100644 arch/avr32/include/asm/bitops.h
delete mode 100644 arch/avr32/include/asm/byteorder.h
delete mode 100644 arch/avr32/include/asm/cache.h
delete mode 100644 arch/avr32/include/asm/config.h
delete mode 100644 arch/avr32/include/asm/dma-mapping.h
delete mode 100644 arch/avr32/include/asm/global_data.h
delete mode 100644 arch/avr32/include/asm/hmatrix-common.h
delete mode 100644 arch/avr32/include/asm/io.h
delete mode 100644 arch/avr32/include/asm/linkage.h
delete mode 100644 arch/avr32/include/asm/posix_types.h
delete mode 100644 arch/avr32/include/asm/processor.h
delete mode 100644 arch/avr32/include/asm/ptrace.h
delete mode 100644 arch/avr32/include/asm/sdram.h
delete mode 100644 arch/avr32/include/asm/sections.h
delete mode 100644 arch/avr32/include/asm/setup.h
delete mode 100644 arch/avr32/include/asm/string.h
delete mode 100644 arch/avr32/include/asm/sysreg.h
delete mode 100644 arch/avr32/include/asm/types.h
delete mode 100644 arch/avr32/include/asm/u-boot.h
delete mode 100644 arch/avr32/include/asm/unaligned.h
delete mode 100644 arch/avr32/lib/Makefile
delete mode 100644 arch/avr32/lib/bootm.c
delete mode 100644 arch/avr32/lib/dram_init.c
delete mode 100644 arch/avr32/lib/interrupts.c
delete mode 100644 arch/avr32/lib/memset.S
delete mode 100644 board/atmel/atngw100/Kconfig
delete mode 100644 board/atmel/atngw100/MAINTAINERS
delete mode 100644 board/atmel/atngw100/Makefile
delete mode 100644 board/atmel/atngw100/atngw100.c
delete mode 100644 board/atmel/atngw100mkii/Kconfig
delete mode 100644 board/atmel/atngw100mkii/MAINTAINERS
delete mode 100644 board/atmel/atngw100mkii/Makefile
delete mode 100644 board/atmel/atngw100mkii/atngw100mkii.c
delete mode 100644 board/atmel/atstk1000/Kconfig
delete mode 100644 board/atmel/atstk1000/MAINTAINERS
delete mode 100644 board/atmel/atstk1000/Makefile
delete mode 100644 board/atmel/atstk1000/atstk1000.c
delete mode 100644 configs/atngw100_defconfig
delete mode 100644 configs/atngw100mkii_defconfig
delete mode 100644 configs/atstk1002_defconfig
delete mode 100644 configs/grasshopper_defconfig
delete mode 100644 doc/README.AVR32
delete mode 100644 doc/README.AVR32-port-muxing
delete mode 100644 include/configs/atngw100.h
delete mode 100644 include/configs/atngw100mkii.h
delete mode 100644 include/configs/atstk1002.h

diff --git a/.travis.yml b/.travis.yml
index 6f14ec2396..f7287ae254 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -60,7 +60,6 @@ env:

before_script:
# install toolchains based on TOOLCHAIN} variable
- - if [[ "${TOOLCHAIN}" == *avr32* ]]; then ./tools/buildman/buildman --fetch-arch avr32 ; fi
- if [[ "${TOOLCHAIN}" == *m68k* ]]; then ./tools/buildman/buildman --fetch-arch m68k ; fi
- if [[ "${TOOLCHAIN}" == *microblaze* ]]; then ./tools/buildman/buildman --fetch-arch microblaze ; fi
- if [[ "${TOOLCHAIN}" == *mips* ]]; then ./tools/buildman/buildman --fetch-arch mips ; fi
@@ -138,10 +137,7 @@ matrix:
- env:
- BUILDMAN="arm946es"
- env:
- - BUILDMAN="atmel -x avr32"
- - env:
- - BUILDMAN="avr32"
- TOOLCHAIN="avr32"
+ - BUILDMAN="atmel"
- env:
- BUILDMAN="aries"
- env:
diff --git a/MAINTAINERS b/MAINTAINERS
index 957e27c40d..e979cc8a2e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -221,12 +221,6 @@ S: Maintained
F: arch/arm/cpu/armv8/zynqmp/
F: arch/arm/include/asm/arch-zynqmp/

-AVR32
-M: Andreas Bießmann <andreas@biessmann.org>
-S: Maintained
-T: git git://git.denx.de/u-boot-avr32.git
-F: arch/avr32/
-
BUILDMAN
M: Simon Glass <sjg@chromium.org>
S: Maintained
diff --git a/README b/README
index 5f4f97cb01..54978c3349 100644
--- a/README
+++ b/README
@@ -136,7 +136,6 @@ Directory Hierarchy:
/arch Architecture specific files
/arc Files generic to ARC architecture
/arm Files generic to ARM architecture
- /avr32 Files generic to AVR32 architecture
/m68k Files generic to m68k architecture
/microblaze Files generic to microblaze architecture
/mips Files generic to MIPS architecture
@@ -320,9 +319,6 @@ The following options need to be configured:

- Board Type: Define exactly one, e.g. CONFIG_MPC8540ADS.

-- CPU Daughterboard Type: (if CONFIG_ATSTK1000 is defined)
- Define exactly one, e.g. CONFIG_ATSTK1002
-
- Marvell Family Member
CONFIG_SYS_MVFS - define it if you want to enable
multiple fs option at one time
@@ -4810,9 +4806,9 @@ details; basically, the header defines the following image properties:
LynxOS, pSOS, QNX, RTEMS, INTEGRITY;
Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, LynxOS,
INTEGRITY).
-* Target CPU Architecture (Provisions for Alpha, ARM, AVR32, Intel x86,
+* Target CPU Architecture (Provisions for Alpha, ARM, Intel x86,
IA64, MIPS, NDS32, Nios II, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit;
- Currently supported: ARM, AVR32, Intel x86, MIPS, NDS32, Nios II, PowerPC).
+ Currently supported: ARM, Intel x86, MIPS, NDS32, Nios II, PowerPC).
* Compression Type (uncompressed, gzip, bzip2)
* Load Address
* Entry Point
diff --git a/arch/Kconfig b/arch/Kconfig
index d04ab9f177..fe1b991041 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -23,10 +23,6 @@ config ARM
select HAVE_PRIVATE_LIBGCC if !ARM64
select SUPPORT_OF_CONTROL

-config AVR32
- bool "AVR32 architecture"
- select CREATE_ARCH_SYMLINK
-
config M68K
bool "M68000 architecture"
select HAVE_PRIVATE_LIBGCC
@@ -166,7 +162,6 @@ config SYS_CONFIG_NAME

source "arch/arc/Kconfig"
source "arch/arm/Kconfig"
-source "arch/avr32/Kconfig"
source "arch/m68k/Kconfig"
source "arch/microblaze/Kconfig"
source "arch/mips/Kconfig"
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
deleted file mode 100644
index eb3377486f..0000000000
--- a/arch/avr32/Kconfig
+++ /dev/null
@@ -1,30 +0,0 @@
-menu "AVR32 architecture"
- depends on AVR32
-
-config SYS_ARCH
- default "avr32"
-
-choice
- prompt "Target select"
- optional
-
-config TARGET_ATNGW100
- bool "Support atngw100"
-
-config TARGET_ATNGW100MKII
- bool "Support atngw100mkii"
-
-config TARGET_ATSTK1002
- bool "Support atstk1002"
-
-config TARGET_GRASSHOPPER
- bool "Support grasshopper"
-
-endchoice
-
-source "board/atmel/atngw100/Kconfig"
-source "board/atmel/atngw100mkii/Kconfig"
-source "board/atmel/atstk1000/Kconfig"
-source "board/in-circuit/grasshopper/Kconfig"
-
-endmenu
diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
deleted file mode 100644
index e9b3184379..0000000000
--- a/arch/avr32/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-head-y := arch/avr32/cpu/start.o
-
-libs-y += arch/avr32/cpu/
-libs-y += arch/avr32/lib/
diff --git a/arch/avr32/config.mk b/arch/avr32/config.mk
deleted file mode 100644
index 469185e8b4..0000000000
--- a/arch/avr32/config.mk
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# (C) Copyright 2000-2002
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-ifeq ($(CROSS_COMPILE),)
-CROSS_COMPILE := avr32-linux-
-endif
-
-CONFIG_STANDALONE_LOAD_ADDR ?= 0x00000000
-
-PLATFORM_RELFLAGS += -ffixed-r5 -fPIC -mno-init-got -mrelax
-PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections
-
-LDFLAGS_u-boot = --gc-sections --relax
diff --git a/arch/avr32/cpu/Makefile b/arch/avr32/cpu/Makefile
deleted file mode 100644
index e111db3e75..0000000000
--- a/arch/avr32/cpu/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# Copyright (C) 2005-2006 Atmel Corporation.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-extra-y += start.o
-
-obj-y += cpu.o
-obj-$(CONFIG_SYS_HSDRAMC) += hsdramc.o
-obj-y += exception.o
-obj-y += cache.o
-obj-y += interrupts.o
-obj-$(CONFIG_PORTMUX_PIO) += portmux-pio.o
-obj-$(CONFIG_PORTMUX_GPIO) += portmux-gpio.o
-obj-y += mmc.o
-
-obj-$(if $(filter at32ap700x,$(SOC)),y) += at32ap700x/
diff --git a/arch/avr32/cpu/at32ap700x/Makefile b/arch/avr32/cpu/at32ap700x/Makefile
deleted file mode 100644
index 06f18963e2..0000000000
--- a/arch/avr32/cpu/at32ap700x/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Copyright (C) 2005-2006 Atmel Corporation
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := portmux.o clk.o mmu.o
diff --git a/arch/avr32/cpu/at32ap700x/clk.c b/arch/avr32/cpu/at32ap700x/clk.c
deleted file mode 100644
index 0fc6088e3e..0000000000
--- a/arch/avr32/cpu/at32ap700x/clk.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Copyright (C) 2005-2008 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-
-#include <asm/io.h>
-
-#include <asm/arch/clk.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/portmux.h>
-
-#include "sm.h"
-
-void clk_init(void)
-{
- uint32_t cksel;
-
- /* in case of soft resets, disable watchdog */
- sm_writel(WDT_CTRL, SM_BF(KEY, 0x55));
- sm_writel(WDT_CTRL, SM_BF(KEY, 0xaa));
-
-#ifdef CONFIG_PLL
- /* Initialize the PLL */
- sm_writel(PM_PLL0, (SM_BF(PLLCOUNT, CONFIG_SYS_PLL0_SUPPRESS_CYCLES)
- | SM_BF(PLLMUL, CONFIG_SYS_PLL0_MUL - 1)
- | SM_BF(PLLDIV, CONFIG_SYS_PLL0_DIV - 1)
- | SM_BF(PLLOPT, CONFIG_SYS_PLL0_OPT)
- | SM_BF(PLLOSC, 0)
- | SM_BIT(PLLEN)));
-
- /* Wait for lock */
- while (!(sm_readl(PM_ISR) & SM_BIT(LOCK0))) ;
-#endif
-
- /* Set up clocks for the CPU and all peripheral buses */
- cksel = 0;
- if (CONFIG_SYS_CLKDIV_CPU)
- cksel |= SM_BIT(CPUDIV) | SM_BF(CPUSEL, CONFIG_SYS_CLKDIV_CPU - 1);
- if (CONFIG_SYS_CLKDIV_HSB)
- cksel |= SM_BIT(HSBDIV) | SM_BF(HSBSEL, CONFIG_SYS_CLKDIV_HSB - 1);
- if (CONFIG_SYS_CLKDIV_PBA)
- cksel |= SM_BIT(PBADIV) | SM_BF(PBASEL, CONFIG_SYS_CLKDIV_PBA - 1);
- if (CONFIG_SYS_CLKDIV_PBB)
- cksel |= SM_BIT(PBBDIV) | SM_BF(PBBSEL, CONFIG_SYS_CLKDIV_PBB - 1);
- sm_writel(PM_CKSEL, cksel);
-
-#ifdef CONFIG_PLL
- /* Use PLL0 as main clock */
- sm_writel(PM_MCCTRL, SM_BIT(PLLSEL));
-
-#ifdef CONFIG_LCD
- /* Set up pixel clock for the LCDC */
- sm_writel(PM_GCCTRL(7), SM_BIT(PLLSEL) | SM_BIT(CEN));
-#endif
-#endif
-}
-
-unsigned long __gclk_set_rate(unsigned int id, enum gclk_parent parent,
- unsigned long rate, unsigned long parent_rate)
-{
- unsigned long divider;
-
- if (rate == 0 || parent_rate == 0) {
- sm_writel(PM_GCCTRL(id), 0);
- return 0;
- }
-
- divider = (parent_rate + rate / 2) / rate;
- if (divider <= 1) {
- sm_writel(PM_GCCTRL(id), parent | SM_BIT(CEN));
- rate = parent_rate;
- } else {
- divider = min(255UL, divider / 2 - 1);
- sm_writel(PM_GCCTRL(id), parent | SM_BIT(CEN) | SM_BIT(DIVEN)
- | SM_BF(DIV, divider));
- rate = parent_rate / (2 * (divider + 1));
- }
-
- return rate;
-}
diff --git a/arch/avr32/cpu/at32ap700x/mmu.c b/arch/avr32/cpu/at32ap700x/mmu.c
deleted file mode 100644
index f5e62f27eb..0000000000
--- a/arch/avr32/cpu/at32ap700x/mmu.c
+++ /dev/null
@@ -1,78 +0,0 @@
-#include <common.h>
-#include <asm/arch/mmu.h>
-#include <asm/sysreg.h>
-
-void mmu_init_r(unsigned long dest_addr)
-{
- uintptr_t vmr_table_addr;
-
- /* Round monitor address down to the nearest page boundary */
- dest_addr &= MMU_PAGE_ADDR_MASK;
-
- /* Initialize TLB entry 0 to cover the monitor, and lock it */
- sysreg_write(TLBEHI, dest_addr | SYSREG_BIT(TLBEHI_V));
- sysreg_write(TLBELO, dest_addr | MMU_VMR_CACHE_WRBACK);
- sysreg_write(MMUCR, SYSREG_BF(DRP, 0) | SYSREG_BF(DLA, 1)
- | SYSREG_BIT(MMUCR_S) | SYSREG_BIT(M));
- __builtin_tlbw();
-
- /*
- * Calculate the address of the VM range table in a PC-relative
- * manner to make sure we hit the SDRAM and not the flash.
- */
- vmr_table_addr = (uintptr_t)&mmu_vmr_table;
- sysreg_write(PTBR, vmr_table_addr);
- printf("VMR table @ 0x%08lx\n", vmr_table_addr);
-
- /* Enable paging */
- sysreg_write(MMUCR, SYSREG_BF(DRP, 1) | SYSREG_BF(DLA, 1)
- | SYSREG_BIT(MMUCR_S) | SYSREG_BIT(M) | SYSREG_BIT(E));
-}
-
-int mmu_handle_tlb_miss(void)
-{
- const struct mmu_vm_range *vmr_table;
- const struct mmu_vm_range *vmr;
- unsigned int fault_pgno;
- int first, last;
-
- fault_pgno = sysreg_read(TLBEAR) >> MMU_PAGE_SHIFT;
- vmr_table = (const struct mmu_vm_range *)sysreg_read(PTBR);
-
- /* Do a binary search through the VM ranges */
- first = 0;
- last = CONFIG_SYS_NR_VM_REGIONS;
- while (first < last) {
- unsigned int start;
- int middle;
-
- /* Pick the entry in the middle of the remaining range */
- middle = (first + last) >> 1;
- vmr = &vmr_table[middle];
- start = vmr->virt_pgno;
-
- /* Do the bisection thing */
- if (fault_pgno < start) {
- last = middle;
- } else if (fault_pgno >= (start + vmr->nr_pages)) {
- first = middle + 1;
- } else {
- /* Got it; let's slam it into the TLB */
- uint32_t tlbelo;
-
- tlbelo = vmr->phys & ~MMU_PAGE_ADDR_MASK;
- tlbelo |= fault_pgno << MMU_PAGE_SHIFT;
- sysreg_write(TLBELO, tlbelo);
- __builtin_tlbw();
-
- /* Zero means success */
- return 0;
- }
- }
-
- /*
- * Didn't find any matching entries. Return a nonzero value to
- * indicate that this should be treated as a fatal exception.
- */
- return -1;
-}
diff --git a/arch/avr32/cpu/at32ap700x/portmux.c b/arch/avr32/cpu/at32ap700x/portmux.c
deleted file mode 100644
index 58327bac87..0000000000
--- a/arch/avr32/cpu/at32ap700x/portmux.c
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- * Copyright (C) 2006, 2008 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-
-#include <asm/io.h>
-
-#include <asm/arch/chip-features.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/portmux.h>
-
-/*
- * Lots of small functions here. We depend on --gc-sections getting
- * rid of the ones we don't need.
- */
-void portmux_enable_ebi(unsigned int bus_width, unsigned int addr_width,
- unsigned long flags, unsigned long drive_strength)
-{
- unsigned long porte_mask = 0;
-
- if (bus_width > 16)
- portmux_select_peripheral(PORTMUX_PORT_E, 0xffff,
- PORTMUX_FUNC_A, PORTMUX_BUSKEEPER);
- if (addr_width > 23)
- porte_mask |= (((1 << (addr_width - 23)) - 1) & 7) << 16;
- if (flags & PORTMUX_EBI_CS(2))
- porte_mask |= 1 << 25;
- if (flags & PORTMUX_EBI_CS(4))
- porte_mask |= 1 << 21;
- if (flags & PORTMUX_EBI_CS(5))
- porte_mask |= 1 << 22;
- if (flags & (PORTMUX_EBI_CF(0) | PORTMUX_EBI_CF(1)))
- porte_mask |= (1 << 19) | (1 << 20) | (1 << 23);
-
- portmux_select_peripheral(PORTMUX_PORT_E, porte_mask,
- PORTMUX_FUNC_A, 0);
-
- if (flags & PORTMUX_EBI_NWAIT)
- portmux_select_peripheral(PORTMUX_PORT_E, 1 << 24,
- PORTMUX_FUNC_A, PORTMUX_PULL_UP);
-}
-
-#ifdef AT32AP700x_CHIP_HAS_MACB
-void portmux_enable_macb0(unsigned long flags, unsigned long drive_strength)
-{
- unsigned long portc_mask;
-
- portc_mask = (1 << 3) /* TXD0 */
- | (1 << 4) /* TXD1 */
- | (1 << 7) /* TXEN */
- | (1 << 8) /* TXCK */
- | (1 << 9) /* RXD0 */
- | (1 << 10) /* RXD1 */
- | (1 << 13) /* RXER */
- | (1 << 15) /* RXDV */
- | (1 << 16) /* MDC */
- | (1 << 17); /* MDIO */
-
- if (flags & PORTMUX_MACB_MII)
- portc_mask |= (1 << 0) /* COL */
- | (1 << 1) /* CRS */
- | (1 << 2) /* TXER */
- | (1 << 5) /* TXD2 */
- | (1 << 6) /* TXD3 */
- | (1 << 11) /* RXD2 */
- | (1 << 12) /* RXD3 */
- | (1 << 14); /* RXCK */
-
- if (flags & PORTMUX_MACB_SPEED)
- portc_mask |= (1 << 18);/* SPD */
-
- /* REVISIT: Some pins are probably pure outputs */
- portmux_select_peripheral(PORTMUX_PORT_C, portc_mask,
- PORTMUX_FUNC_A, PORTMUX_BUSKEEPER);
-}
-
-void portmux_enable_macb1(unsigned long flags, unsigned long drive_strength)
-{
- unsigned long portc_mask = 0;
- unsigned long portd_mask;
-
- portd_mask = (1 << 13) /* TXD0 */
- | (1 << 14) /* TXD1 */
- | (1 << 11) /* TXEN */
- | (1 << 12) /* TXCK */
- | (1 << 10) /* RXD0 */
- | (1 << 6) /* RXD1 */
- | (1 << 5) /* RXER */
- | (1 << 4) /* RXDV */
- | (1 << 3) /* MDC */
- | (1 << 2); /* MDIO */
-
- if (flags & PORTMUX_MACB_MII)
- portc_mask = (1 << 19) /* COL */
- | (1 << 23) /* CRS */
- | (1 << 26) /* TXER */
- | (1 << 27) /* TXD2 */
- | (1 << 28) /* TXD3 */
- | (1 << 29) /* RXD2 */
- | (1 << 30) /* RXD3 */
- | (1 << 24); /* RXCK */
-
- if (flags & PORTMUX_MACB_SPEED)
- portd_mask |= (1 << 15);/* SPD */
-
- /* REVISIT: Some pins are probably pure outputs */
- portmux_select_peripheral(PORTMUX_PORT_D, portd_mask,
- PORTMUX_FUNC_B, PORTMUX_BUSKEEPER);
- portmux_select_peripheral(PORTMUX_PORT_C, portc_mask,
- PORTMUX_FUNC_B, PORTMUX_BUSKEEPER);
-}
-#endif
-
-#ifdef AT32AP700x_CHIP_HAS_MMCI
-void portmux_enable_mmci(unsigned int slot, unsigned long flags,
- unsigned long drive_strength)
-{
- unsigned long mask;
- unsigned long portmux_flags = PORTMUX_PULL_UP;
-
- /* First, the common CLK signal. It doesn't need a pull-up */
- portmux_select_peripheral(PORTMUX_PORT_A, 1 << 10,
- PORTMUX_FUNC_A, 0);
-
- if (flags & PORTMUX_MMCI_EXT_PULLUP)
- portmux_flags = 0;
-
- /* Then, the per-slot signals */
- switch (slot) {
- case 0:
- mask = (1 << 11) | (1 << 12); /* CMD and DATA0 */
- if (flags & PORTMUX_MMCI_4BIT)
- /* DATA1..DATA3 */
- mask |= (1 << 13) | (1 << 14) | (1 << 15);
- portmux_select_peripheral(PORTMUX_PORT_A, mask,
- PORTMUX_FUNC_A, portmux_flags);
- break;
- case 1:
- mask = (1 << 6) | (1 << 7); /* CMD and DATA0 */
- if (flags & PORTMUX_MMCI_4BIT)
- /* DATA1..DATA3 */
- mask |= (1 << 8) | (1 << 9) | (1 << 10);
- portmux_select_peripheral(PORTMUX_PORT_B, mask,
- PORTMUX_FUNC_B, portmux_flags);
- break;
- }
-}
-#endif
-
-#ifdef AT32AP700x_CHIP_HAS_SPI
-void portmux_enable_spi0(unsigned long cs_mask, unsigned long drive_strength)
-{
- unsigned long pin_mask;
-
- /* MOSI and SCK */
- portmux_select_peripheral(PORTMUX_PORT_A, (1 << 1) | (1 << 2),
- PORTMUX_FUNC_A, 0);
- /* MISO may float */
- portmux_select_peripheral(PORTMUX_PORT_A, 1 << 0,
- PORTMUX_FUNC_A, PORTMUX_BUSKEEPER);
-
- /* Set up NPCSx as GPIO outputs, initially high */
- pin_mask = (cs_mask & 7) << 3;
- if (cs_mask & (1 << 3))
- pin_mask |= 1 << 20;
-
- portmux_select_gpio(PORTMUX_PORT_A, pin_mask,
- PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH);
-}
-
-void portmux_enable_spi1(unsigned long cs_mask, unsigned long drive_strength)
-{
- /* MOSI and SCK */
- portmux_select_peripheral(PORTMUX_PORT_B, (1 << 1) | (1 << 5),
- PORTMUX_FUNC_B, 0);
- /* MISO may float */
- portmux_select_peripheral(PORTMUX_PORT_B, 1 << 0,
- PORTMUX_FUNC_B, PORTMUX_BUSKEEPER);
-
- /* Set up NPCSx as GPIO outputs, initially high */
- portmux_select_gpio(PORTMUX_PORT_B, (cs_mask & 7) << 2,
- PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH);
- portmux_select_gpio(PORTMUX_PORT_A, (cs_mask & 8) << (27 - 3),
- PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH);
-}
-#endif
-
-#ifdef AT32AP700x_CHIP_HAS_LCDC
-void portmux_enable_lcdc(int pin_config)
-{
- unsigned long portc_mask = 0;
- unsigned long portd_mask = 0;
- unsigned long porte_mask = 0;
-
- switch (pin_config) {
- case 0:
- portc_mask = (1 << 19) /* CC */
- | (1 << 20) /* HSYNC */
- | (1 << 21) /* PCLK */
- | (1 << 22) /* VSYNC */
- | (1 << 23) /* DVAL */
- | (1 << 24) /* MODE */
- | (1 << 25) /* PWR */
- | (1 << 26) /* DATA0 */
- | (1 << 27) /* DATA1 */
- | (1 << 28) /* DATA2 */
- | (1 << 29) /* DATA3 */
- | (1 << 30) /* DATA4 */
- | (1 << 31); /* DATA5 */
-
- portd_mask = (1 << 0) /* DATA6 */
- | (1 << 1) /* DATA7 */
- | (1 << 2) /* DATA8 */
- | (1 << 3) /* DATA9 */
- | (1 << 4) /* DATA10 */
- | (1 << 5) /* DATA11 */
- | (1 << 6) /* DATA12 */
- | (1 << 7) /* DATA13 */
- | (1 << 8) /* DATA14 */
- | (1 << 9) /* DATA15 */
- | (1 << 10) /* DATA16 */
- | (1 << 11) /* DATA17 */
- | (1 << 12) /* DATA18 */
- | (1 << 13) /* DATA19 */
- | (1 << 14) /* DATA20 */
- | (1 << 15) /* DATA21 */
- | (1 << 16) /* DATA22 */
- | (1 << 17); /* DATA23 */
- break;
-
- case 1:
- portc_mask = (1 << 20) /* HSYNC */
- | (1 << 21) /* PCLK */
- | (1 << 22) /* VSYNC */
- | (1 << 25) /* PWR */
- | (1 << 31); /* DATA5 */
-
- portd_mask = (1 << 0) /* DATA6 */
- | (1 << 1) /* DATA7 */
- | (1 << 7) /* DATA13 */
- | (1 << 8) /* DATA14 */
- | (1 << 9) /* DATA15 */
- | (1 << 16) /* DATA22 */
- | (1 << 17); /* DATA23 */
-
- porte_mask = (1 << 0) /* CC */
- | (1 << 1) /* DVAL */
- | (1 << 2) /* MODE */
- | (1 << 3) /* DATA0 */
- | (1 << 4) /* DATA1 */
- | (1 << 5) /* DATA2 */
- | (1 << 6) /* DATA3 */
- | (1 << 7) /* DATA4 */
- | (1 << 8) /* DATA8 */
- | (1 << 9) /* DATA9 */
- | (1 << 10) /* DATA10 */
- | (1 << 11) /* DATA11 */
- | (1 << 12) /* DATA12 */
- | (1 << 13) /* DATA16 */
- | (1 << 14) /* DATA17 */
- | (1 << 15) /* DATA18 */
- | (1 << 16) /* DATA19 */
- | (1 << 17) /* DATA20 */
- | (1 << 18); /* DATA21 */
- break;
- }
-
- /* REVISIT: Some pins are probably pure outputs */
- portmux_select_peripheral(PORTMUX_PORT_C, portc_mask,
- PORTMUX_FUNC_A, PORTMUX_BUSKEEPER);
- portmux_select_peripheral(PORTMUX_PORT_D, portd_mask,
- PORTMUX_FUNC_A, PORTMUX_BUSKEEPER);
- portmux_select_peripheral(PORTMUX_PORT_E, porte_mask,
- PORTMUX_FUNC_B, PORTMUX_BUSKEEPER);
-}
-#endif
diff --git a/arch/avr32/cpu/at32ap700x/sm.h b/arch/avr32/cpu/at32ap700x/sm.h
deleted file mode 100644
index 9a3804efe4..0000000000
--- a/arch/avr32/cpu/at32ap700x/sm.h
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * Register definitions for System Manager
- */
-#ifndef __CPU_AT32AP_SM_H__
-#define __CPU_AT32AP_SM_H__
-
-/* SM register offsets */
-#define SM_PM_MCCTRL 0x0000
-#define SM_PM_CKSEL 0x0004
-#define SM_PM_CPU_MASK 0x0008
-#define SM_PM_HSB_MASK 0x000c
-#define SM_PM_PBA_MASK 0x0010
-#define SM_PM_PBB_MASK 0x0014
-#define SM_PM_PLL0 0x0020
-#define SM_PM_PLL1 0x0024
-#define SM_PM_VCTRL 0x0030
-#define SM_PM_VMREF 0x0034
-#define SM_PM_VMV 0x0038
-#define SM_PM_IER 0x0040
-#define SM_PM_IDR 0x0044
-#define SM_PM_IMR 0x0048
-#define SM_PM_ISR 0x004c
-#define SM_PM_ICR 0x0050
-#define SM_PM_GCCTRL(x) (0x0060 + 4 * x)
-#define SM_RTC_CTRL 0x0080
-#define SM_RTC_VAL 0x0084
-#define SM_RTC_TOP 0x0088
-#define SM_RTC_IER 0x0090
-#define SM_RTC_IDR 0x0094
-#define SM_RTC_IMR 0x0098
-#define SM_RTC_ISR 0x009c
-#define SM_RTC_ICR 0x00a0
-#define SM_WDT_CTRL 0x00b0
-#define SM_WDT_CLR 0x00b4
-#define SM_WDT_EXT 0x00b8
-#define SM_RC_RCAUSE 0x00c0
-#define SM_EIM_IER 0x0100
-#define SM_EIM_IDR 0x0104
-#define SM_EIM_IMR 0x0108
-#define SM_EIM_ISR 0x010c
-#define SM_EIM_ICR 0x0110
-#define SM_EIM_MODE 0x0114
-#define SM_EIM_EDGE 0x0118
-#define SM_EIM_LEVEL 0x011c
-#define SM_EIM_TEST 0x0120
-#define SM_EIM_NMIC 0x0124
-
-/* Bitfields in PM_CKSEL */
-#define SM_CPUSEL_OFFSET 0
-#define SM_CPUSEL_SIZE 3
-#define SM_CPUDIV_OFFSET 7
-#define SM_CPUDIV_SIZE 1
-#define SM_HSBSEL_OFFSET 8
-#define SM_HSBSEL_SIZE 3
-#define SM_HSBDIV_OFFSET 15
-#define SM_HSBDIV_SIZE 1
-#define SM_PBASEL_OFFSET 16
-#define SM_PBASEL_SIZE 3
-#define SM_PBADIV_OFFSET 23
-#define SM_PBADIV_SIZE 1
-#define SM_PBBSEL_OFFSET 24
-#define SM_PBBSEL_SIZE 3
-#define SM_PBBDIV_OFFSET 31
-#define SM_PBBDIV_SIZE 1
-
-/* Bitfields in PM_PLL0 */
-#define SM_PLLEN_OFFSET 0
-#define SM_PLLEN_SIZE 1
-#define SM_PLLOSC_OFFSET 1
-#define SM_PLLOSC_SIZE 1
-#define SM_PLLOPT_OFFSET 2
-#define SM_PLLOPT_SIZE 3
-#define SM_PLLDIV_OFFSET 8
-#define SM_PLLDIV_SIZE 8
-#define SM_PLLMUL_OFFSET 16
-#define SM_PLLMUL_SIZE 8
-#define SM_PLLCOUNT_OFFSET 24
-#define SM_PLLCOUNT_SIZE 6
-#define SM_PLLTEST_OFFSET 31
-#define SM_PLLTEST_SIZE 1
-
-/* Bitfields in PM_VCTRL */
-#define SM_VAUTO_OFFSET 0
-#define SM_VAUTO_SIZE 1
-#define SM_PM_VCTRL_VAL_OFFSET 8
-#define SM_PM_VCTRL_VAL_SIZE 7
-
-/* Bitfields in PM_VMREF */
-#define SM_REFSEL_OFFSET 0
-#define SM_REFSEL_SIZE 4
-
-/* Bitfields in PM_VMV */
-#define SM_PM_VMV_VAL_OFFSET 0
-#define SM_PM_VMV_VAL_SIZE 8
-
-/* Bitfields in PM_ICR */
-#define SM_LOCK0_OFFSET 0
-#define SM_LOCK0_SIZE 1
-#define SM_LOCK1_OFFSET 1
-#define SM_LOCK1_SIZE 1
-#define SM_WAKE_OFFSET 2
-#define SM_WAKE_SIZE 1
-#define SM_VOK_OFFSET 3
-#define SM_VOK_SIZE 1
-#define SM_VMRDY_OFFSET 4
-#define SM_VMRDY_SIZE 1
-#define SM_CKRDY_OFFSET 5
-#define SM_CKRDY_SIZE 1
-
-/* Bitfields in PM_GCCTRL */
-#define SM_OSCSEL_OFFSET 0
-#define SM_OSCSEL_SIZE 1
-#define SM_PLLSEL_OFFSET 1
-#define SM_PLLSEL_SIZE 1
-#define SM_CEN_OFFSET 2
-#define SM_CEN_SIZE 1
-#define SM_CPC_OFFSET 3
-#define SM_CPC_SIZE 1
-#define SM_DIVEN_OFFSET 4
-#define SM_DIVEN_SIZE 1
-#define SM_DIV_OFFSET 8
-#define SM_DIV_SIZE 8
-
-/* Bitfields in RTC_CTRL */
-#define SM_PCLR_OFFSET 1
-#define SM_PCLR_SIZE 1
-#define SM_TOPEN_OFFSET 2
-#define SM_TOPEN_SIZE 1
-#define SM_CLKEN_OFFSET 3
-#define SM_CLKEN_SIZE 1
-#define SM_PSEL_OFFSET 8
-#define SM_PSEL_SIZE 16
-
-/* Bitfields in RTC_VAL */
-#define SM_RTC_VAL_VAL_OFFSET 0
-#define SM_RTC_VAL_VAL_SIZE 31
-
-/* Bitfields in RTC_TOP */
-#define SM_RTC_TOP_VAL_OFFSET 0
-#define SM_RTC_TOP_VAL_SIZE 32
-
-/* Bitfields in RTC_ICR */
-#define SM_TOPI_OFFSET 0
-#define SM_TOPI_SIZE 1
-
-/* Bitfields in WDT_CTRL */
-#define SM_KEY_OFFSET 24
-#define SM_KEY_SIZE 8
-
-/* Bitfields in RC_RCAUSE */
-#define SM_POR_OFFSET 0
-#define SM_POR_SIZE 1
-#define SM_BOD_OFFSET 1
-#define SM_BOD_SIZE 1
-#define SM_EXT_OFFSET 2
-#define SM_EXT_SIZE 1
-#define SM_WDT_OFFSET 3
-#define SM_WDT_SIZE 1
-#define SM_NTAE_OFFSET 4
-#define SM_NTAE_SIZE 1
-#define SM_SERP_OFFSET 5
-#define SM_SERP_SIZE 1
-
-/* Bitfields in EIM_EDGE */
-#define SM_INT0_OFFSET 0
-#define SM_INT0_SIZE 1
-#define SM_INT1_OFFSET 1
-#define SM_INT1_SIZE 1
-#define SM_INT2_OFFSET 2
-#define SM_INT2_SIZE 1
-#define SM_INT3_OFFSET 3
-#define SM_INT3_SIZE 1
-
-/* Bitfields in EIM_LEVEL */
-
-/* Bitfields in EIM_TEST */
-#define SM_TESTEN_OFFSET 31
-#define SM_TESTEN_SIZE 1
-
-/* Bitfields in EIM_NMIC */
-#define SM_EN_OFFSET 0
-#define SM_EN_SIZE 1
-
-/* Bit manipulation macros */
-#define SM_BIT(name) \
- (1 << SM_##name##_OFFSET)
-#define SM_BF(name,value) \
- (((value) & ((1 << SM_##name##_SIZE) - 1)) \
- << SM_##name##_OFFSET)
-#define SM_BFEXT(name,value) \
- (((value) >> SM_##name##_OFFSET) \
- & ((1 << SM_##name##_SIZE) - 1))
-#define SM_BFINS(name,value,old) \
- (((old) & ~(((1 << SM_##name##_SIZE) - 1) \
- << SM_##name##_OFFSET)) \
- | SM_BF(name,value))
-
-/* Register access macros */
-#define sm_readl(reg) \
- readl((void *)ATMEL_BASE_SM + SM_##reg)
-#define sm_writel(reg,value) \
- writel((value), (void *)ATMEL_BASE_SM + SM_##reg)
-
-#endif /* __CPU_AT32AP_SM_H__ */
diff --git a/arch/avr32/cpu/cache.c b/arch/avr32/cpu/cache.c
deleted file mode 100644
index b3ffc3348b..0000000000
--- a/arch/avr32/cpu/cache.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-
-#include <asm/arch/cacheflush.h>
-
-void dcache_clean_range(volatile void *start, size_t size)
-{
- unsigned long v, begin, end, linesz;
-
- linesz = CONFIG_SYS_DCACHE_LINESZ;
-
- /* You asked for it, you got it */
- begin = (unsigned long)start & ~(linesz - 1);
- end = ((unsigned long)start + size + linesz - 1) & ~(linesz - 1);
-
- for (v = begin; v < end; v += linesz)
- dcache_clean_line((void *)v);
-
- sync_write_buffer();
-}
-
-void invalidate_dcache_range(unsigned long start, unsigned long stop)
-{
- unsigned long v, linesz;
-
- linesz = CONFIG_SYS_DCACHE_LINESZ;
-
- /* You asked for it, you got it */
- start = start & ~(linesz - 1);
- stop = (stop + linesz - 1) & ~(linesz - 1);
-
- for (v = start; v < stop; v += linesz)
- dcache_invalidate_line((void *)v);
-}
-
-void flush_dcache_range(unsigned long start, unsigned long stop)
-{
- unsigned long v, linesz;
-
- linesz = CONFIG_SYS_DCACHE_LINESZ;
-
- /* You asked for it, you got it */
- start = start & ~(linesz - 1);
- stop = (stop + linesz - 1) & ~(linesz - 1);
-
- for (v = start; v < stop; v += linesz)
- dcache_flush_line((void *)v);
-
- sync_write_buffer();
-}
-
-void icache_invalidate_range(volatile void *start, size_t size)
-{
- unsigned long v, begin, end, linesz;
-
- linesz = CONFIG_SYS_ICACHE_LINESZ;
-
- /* You asked for it, you got it */
- begin = (unsigned long)start & ~(linesz - 1);
- end = ((unsigned long)start + size + linesz - 1) & ~(linesz - 1);
-
- for (v = begin; v < end; v += linesz)
- icache_invalidate_line((void *)v);
-}
-
-/*
- * This is called after loading something into memory. We need to
- * make sure that everything that was loaded is actually written to
- * RAM, and that the icache will look for it. Cleaning the dcache and
- * invalidating the icache will do the trick.
- */
-void flush_cache (unsigned long start_addr, unsigned long size)
-{
- dcache_clean_range((void *)start_addr, size);
- icache_invalidate_range((void *)start_addr, size);
-}
diff --git a/arch/avr32/cpu/config.mk b/arch/avr32/cpu/config.mk
deleted file mode 100644
index 3d2d817f8f..0000000000
--- a/arch/avr32/cpu/config.mk
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Copyright (C) 2005-2006 Atmel Corporation
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-PLATFORM_RELFLAGS += -mcpu=ap7000
diff --git a/arch/avr32/cpu/cpu.c b/arch/avr32/cpu/cpu.c
deleted file mode 100644
index cd226a6f71..0000000000
--- a/arch/avr32/cpu/cpu.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * Copyright (C) 2005-2006 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-#include <command.h>
-
-#include <asm/io.h>
-#include <asm/sections.h>
-#include <asm/sysreg.h>
-
-#include <asm/arch/clk.h>
-#include <asm/arch/hardware.h>
-
-#include "hsmc3.h"
-
-/* Sanity checks */
-#if (CONFIG_SYS_CLKDIV_CPU > CONFIG_SYS_CLKDIV_HSB) \
- || (CONFIG_SYS_CLKDIV_HSB > CONFIG_SYS_CLKDIV_PBA) \
- || (CONFIG_SYS_CLKDIV_HSB > CONFIG_SYS_CLKDIV_PBB)
-# error Constraint fCPU >= fHSB >= fPB{A,B} violated
-#endif
-#if defined(CONFIG_PLL) && ((CONFIG_SYS_PLL0_MUL < 1) || (CONFIG_SYS_PLL0_DIV < 1))
-# error Invalid PLL multiplier and/or divider
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int arch_cpu_init(void)
-{
- extern void _evba(void);
-
- gd->arch.cpu_hz = CONFIG_SYS_OSC0_HZ;
-
- /* TODO: Move somewhere else, but needs to be run before we
- * increase the clock frequency. */
- hsmc3_writel(MODE0, 0x00031103);
- hsmc3_writel(CYCLE0, 0x000c000d);
- hsmc3_writel(PULSE0, 0x0b0a0906);
- hsmc3_writel(SETUP0, 0x00010002);
-
- clk_init();
-
- /* Update the CPU speed according to the PLL configuration */
- gd->arch.cpu_hz = get_cpu_clk_rate();
-
- /* Set up the exception handler table and enable exceptions */
- sysreg_write(EVBA, (unsigned long)&_evba);
- asm volatile("csrf %0" : : "i"(SYSREG_EM_OFFSET));
-
- return 0;
-}
-
-void prepare_to_boot(void)
-{
- /* Flush both caches and the write buffer */
- asm volatile("cache %0[4], 010\n\t"
- "cache %0[0], 000\n\t"
- "sync 0" : : "r"(0) : "memory");
-}
-
-int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- /* This will reset the CPU core, caches, MMU and all internal busses */
- __builtin_mtdr(8, 1 << 13); /* set DC:DBE */
- __builtin_mtdr(8, 1 << 30); /* set DC:RES */
-
- /* Flush the pipeline before we declare it a failure */
- asm volatile("sub pc, pc, -4");
-
- return -1;
-}
diff --git a/arch/avr32/cpu/exception.c b/arch/avr32/cpu/exception.c
deleted file mode 100644
index 22eab03b12..0000000000
--- a/arch/avr32/cpu/exception.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Copyright (C) 2005-2006 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-
-#include <asm/sysreg.h>
-#include <asm/ptrace.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define STACKSIZE 2048
-
-static const char * const cpu_modes[8] = {
- "Application", "Supervisor", "Interrupt level 0", "Interrupt level 1",
- "Interrupt level 2", "Interrupt level 3", "Exception", "NMI"
-};
-
-static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
-{
- unsigned long p;
- int i;
-
- printf("%s(0x%08lx to 0x%08lx)\n", str, bottom, top);
-
- for (p = bottom & ~31; p < top; ) {
- printf("%04lx: ", p & 0xffff);
-
- for (i = 0; i < 8; i++, p += 4) {
- unsigned int val;
-
- if (p < bottom || p >= top)
- printf(" ");
- else {
- val = *(unsigned long *)p;
- printf("%08x ", val);
- }
- }
- printf("\n");
- }
-}
-
-void do_unknown_exception(unsigned int ecr, struct pt_regs *regs)
-{
- unsigned int mode;
-
- printf("\n *** Unhandled exception %u at PC=0x%08lx [%08lx]\n",
- ecr, regs->pc, regs->pc - gd->reloc_off);
-
- switch (ecr) {
- case ECR_BUS_ERROR_WRITE:
- case ECR_BUS_ERROR_READ:
- printf("Bus error at address 0x%08lx\n",
- sysreg_read(BEAR));
- break;
- case ECR_TLB_MULTIPLE:
- case ECR_ADDR_ALIGN_X:
- case ECR_PROTECTION_X:
- case ECR_ADDR_ALIGN_R:
- case ECR_ADDR_ALIGN_W:
- case ECR_PROTECTION_R:
- case ECR_PROTECTION_W:
- case ECR_DTLB_MODIFIED:
- case ECR_TLB_MISS_X:
- case ECR_TLB_MISS_R:
- case ECR_TLB_MISS_W:
- printf("MMU exception at address 0x%08lx\n",
- sysreg_read(TLBEAR));
- break;
- }
-
- printf(" pc: %08lx lr: %08lx sp: %08lx r12: %08lx\n",
- regs->pc, regs->lr, regs->sp, regs->r12);
- printf(" r11: %08lx r10: %08lx r9: %08lx r8: %08lx\n",
- regs->r11, regs->r10, regs->r9, regs->r8);
- printf(" r7: %08lx r6: %08lx r5: %08lx r4: %08lx\n",
- regs->r7, regs->r6, regs->r5, regs->r4);
- printf(" r3: %08lx r2: %08lx r1: %08lx r0: %08lx\n",
- regs->r3, regs->r2, regs->r1, regs->r0);
- printf("Flags: %c%c%c%c%c\n",
- regs->sr & SR_Q ? 'Q' : 'q',
- regs->sr & SR_V ? 'V' : 'v',
- regs->sr & SR_N ? 'N' : 'n',
- regs->sr & SR_Z ? 'Z' : 'z',
- regs->sr & SR_C ? 'C' : 'c');
- printf("Mode bits: %c%c%c%c%c%c%c%c%c\n",
- regs->sr & SR_H ? 'H' : 'h',
- regs->sr & SR_R ? 'R' : 'r',
- regs->sr & SR_J ? 'J' : 'j',
- regs->sr & SR_EM ? 'E' : 'e',
- regs->sr & SR_I3M ? '3' : '.',
- regs->sr & SR_I2M ? '2' : '.',
- regs->sr & SR_I1M ? '1' : '.',
- regs->sr & SR_I0M ? '0' : '.',
- regs->sr & SR_GM ? 'G' : 'g');
- mode = (regs->sr >> SYSREG_M0_OFFSET) & 7;
- printf("CPU Mode: %s\n", cpu_modes[mode]);
-
- /* Avoid exception loops */
- if (regs->sp < (gd->start_addr_sp - STACKSIZE) ||
- regs->sp >= gd->start_addr_sp)
- printf("\nStack pointer seems bogus, won't do stack dump\n");
- else
- dump_mem("\nStack: ", regs->sp, gd->start_addr_sp);
-
- panic("Unhandled exception\n");
-}
diff --git a/arch/avr32/cpu/hsdramc.c b/arch/avr32/cpu/hsdramc.c
deleted file mode 100644
index 7e48172038..0000000000
--- a/arch/avr32/cpu/hsdramc.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Copyright (C) 2005-2006 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-
-#include <asm/io.h>
-#include <asm/sdram.h>
-
-#include <asm/arch/clk.h>
-#include <asm/arch/hardware.h>
-
-#include "hsdramc1.h"
-
-unsigned long sdram_init(void *sdram_base, const struct sdram_config *config)
-{
- unsigned long sdram_size;
- uint32_t cfgreg;
- unsigned int i;
-
- cfgreg = (HSDRAMC1_BF(NC, config->col_bits - 8)
- | HSDRAMC1_BF(NR, config->row_bits - 11)
- | HSDRAMC1_BF(NB, config->bank_bits - 1)
- | HSDRAMC1_BF(CAS, config->cas)
- | HSDRAMC1_BF(TWR, config->twr)
- | HSDRAMC1_BF(TRC, config->trc)
- | HSDRAMC1_BF(TRP, config->trp)
- | HSDRAMC1_BF(TRCD, config->trcd)
- | HSDRAMC1_BF(TRAS, config->tras)
- | HSDRAMC1_BF(TXSR, config->txsr));
-
- if (config->data_bits == SDRAM_DATA_16BIT)
- cfgreg |= HSDRAMC1_BIT(DBW);
-
- hsdramc1_writel(CR, cfgreg);
-
- /* Send a NOP to turn on the clock (necessary on some chips) */
- hsdramc1_writel(MR, HSDRAMC1_MODE_NOP);
- hsdramc1_readl(MR);
- writel(0, sdram_base);
-
- /*
- * Initialization sequence for SDRAM, from the data sheet:
- *
- * 1. A minimum pause of 200 us is provided to precede any
- * signal toggle.
- */
- udelay(200);
-
- /*
- * 2. A Precharge All command is issued to the SDRAM
- */
- hsdramc1_writel(MR, HSDRAMC1_MODE_BANKS_PRECHARGE);
- hsdramc1_readl(MR);
- writel(0, sdram_base);
-
- /*
- * 3. Eight auto-refresh (CBR) cycles are provided
- */
- hsdramc1_writel(MR, HSDRAMC1_MODE_AUTO_REFRESH);
- hsdramc1_readl(MR);
- for (i = 0; i < 8; i++)
- writel(0, sdram_base);
-
- /*
- * 4. A mode register set (MRS) cycle is issued to program
- * SDRAM parameters, in particular CAS latency and burst
- * length.
- *
- * The address will be chosen by the SDRAMC automatically; we
- * just have to make sure BA[1:0] are set to 0.
- */
- hsdramc1_writel(MR, HSDRAMC1_MODE_LOAD_MODE);
- hsdramc1_readl(MR);
- writel(0, sdram_base);
-
- /*
- * 5. The application must go into Normal Mode, setting Mode
- * to 0 in the Mode Register and performing a write access
- * @any location in the SDRAM.
- */
- hsdramc1_writel(MR, HSDRAMC1_MODE_NORMAL);
- hsdramc1_readl(MR);
- writel(0, sdram_base);
-
- /*
- * 6. Write refresh rate into SDRAMC refresh timer count
- * register (refresh rate = timing between refresh cycles).
- */
- hsdramc1_writel(TR, config->refresh_period);
-
- if (config->data_bits == SDRAM_DATA_16BIT)
- sdram_size = 1 << (config->row_bits + config->col_bits
- + config->bank_bits + 1);
- else
- sdram_size = 1 << (config->row_bits + config->col_bits
- + config->bank_bits + 2);
-
- return sdram_size;
-}
diff --git a/arch/avr32/cpu/hsdramc1.h b/arch/avr32/cpu/hsdramc1.h
deleted file mode 100644
index e18e074a7a..0000000000
--- a/arch/avr32/cpu/hsdramc1.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * Register definitions for SDRAM Controller
- */
-#ifndef __ASM_AVR32_HSDRAMC1_H__
-#define __ASM_AVR32_HSDRAMC1_H__
-
-/* HSDRAMC1 register offsets */
-#define HSDRAMC1_MR 0x0000
-#define HSDRAMC1_TR 0x0004
-#define HSDRAMC1_CR 0x0008
-#define HSDRAMC1_HSR 0x000c
-#define HSDRAMC1_LPR 0x0010
-#define HSDRAMC1_IER 0x0014
-#define HSDRAMC1_IDR 0x0018
-#define HSDRAMC1_IMR 0x001c
-#define HSDRAMC1_ISR 0x0020
-#define HSDRAMC1_MDR 0x0024
-#define HSDRAMC1_VERSION 0x00fc
-
-/* Bitfields in MR */
-#define HSDRAMC1_MODE_OFFSET 0
-#define HSDRAMC1_MODE_SIZE 3
-
-/* Bitfields in TR */
-#define HSDRAMC1_COUNT_OFFSET 0
-#define HSDRAMC1_COUNT_SIZE 12
-
-/* Bitfields in CR */
-#define HSDRAMC1_NC_OFFSET 0
-#define HSDRAMC1_NC_SIZE 2
-#define HSDRAMC1_NR_OFFSET 2
-#define HSDRAMC1_NR_SIZE 2
-#define HSDRAMC1_NB_OFFSET 4
-#define HSDRAMC1_NB_SIZE 1
-#define HSDRAMC1_CAS_OFFSET 5
-#define HSDRAMC1_CAS_SIZE 2
-#define HSDRAMC1_DBW_OFFSET 7
-#define HSDRAMC1_DBW_SIZE 1
-#define HSDRAMC1_TWR_OFFSET 8
-#define HSDRAMC1_TWR_SIZE 4
-#define HSDRAMC1_TRC_OFFSET 12
-#define HSDRAMC1_TRC_SIZE 4
-#define HSDRAMC1_TRP_OFFSET 16
-#define HSDRAMC1_TRP_SIZE 4
-#define HSDRAMC1_TRCD_OFFSET 20
-#define HSDRAMC1_TRCD_SIZE 4
-#define HSDRAMC1_TRAS_OFFSET 24
-#define HSDRAMC1_TRAS_SIZE 4
-#define HSDRAMC1_TXSR_OFFSET 28
-#define HSDRAMC1_TXSR_SIZE 4
-
-/* Bitfields in HSR */
-#define HSDRAMC1_DA_OFFSET 0
-#define HSDRAMC1_DA_SIZE 1
-
-/* Bitfields in LPR */
-#define HSDRAMC1_LPCB_OFFSET 0
-#define HSDRAMC1_LPCB_SIZE 2
-#define HSDRAMC1_PASR_OFFSET 4
-#define HSDRAMC1_PASR_SIZE 3
-#define HSDRAMC1_TCSR_OFFSET 8
-#define HSDRAMC1_TCSR_SIZE 2
-#define HSDRAMC1_DS_OFFSET 10
-#define HSDRAMC1_DS_SIZE 2
-#define HSDRAMC1_TIMEOUT_OFFSET 12
-#define HSDRAMC1_TIMEOUT_SIZE 2
-
-/* Bitfields in IDR */
-#define HSDRAMC1_RES_OFFSET 0
-#define HSDRAMC1_RES_SIZE 1
-
-/* Bitfields in MDR */
-#define HSDRAMC1_MD_OFFSET 0
-#define HSDRAMC1_MD_SIZE 2
-
-/* Bitfields in VERSION */
-#define HSDRAMC1_VERSION_OFFSET 0
-#define HSDRAMC1_VERSION_SIZE 12
-#define HSDRAMC1_MFN_OFFSET 16
-#define HSDRAMC1_MFN_SIZE 3
-
-/* Constants for MODE */
-#define HSDRAMC1_MODE_NORMAL 0
-#define HSDRAMC1_MODE_NOP 1
-#define HSDRAMC1_MODE_BANKS_PRECHARGE 2
-#define HSDRAMC1_MODE_LOAD_MODE 3
-#define HSDRAMC1_MODE_AUTO_REFRESH 4
-#define HSDRAMC1_MODE_EXT_LOAD_MODE 5
-#define HSDRAMC1_MODE_POWER_DOWN 6
-
-/* Constants for NC */
-#define HSDRAMC1_NC_8_COLUMN_BITS 0
-#define HSDRAMC1_NC_9_COLUMN_BITS 1
-#define HSDRAMC1_NC_10_COLUMN_BITS 2
-#define HSDRAMC1_NC_11_COLUMN_BITS 3
-
-/* Constants for NR */
-#define HSDRAMC1_NR_11_ROW_BITS 0
-#define HSDRAMC1_NR_12_ROW_BITS 1
-#define HSDRAMC1_NR_13_ROW_BITS 2
-
-/* Constants for NB */
-#define HSDRAMC1_NB_TWO_BANKS 0
-#define HSDRAMC1_NB_FOUR_BANKS 1
-
-/* Constants for CAS */
-#define HSDRAMC1_CAS_ONE_CYCLE 1
-#define HSDRAMC1_CAS_TWO_CYCLES 2
-
-/* Constants for DBW */
-#define HSDRAMC1_DBW_32_BITS 0
-#define HSDRAMC1_DBW_16_BITS 1
-
-/* Constants for TIMEOUT */
-#define HSDRAMC1_TIMEOUT_AFTER_END 0
-#define HSDRAMC1_TIMEOUT_64_CYC_AFTER_END 1
-#define HSDRAMC1_TIMEOUT_128_CYC_AFTER_END 2
-
-/* Constants for MD */
-#define HSDRAMC1_MD_SDRAM 0
-#define HSDRAMC1_MD_LOW_POWER_SDRAM 1
-
-/* Bit manipulation macros */
-#define HSDRAMC1_BIT(name) \
- (1 << HSDRAMC1_##name##_OFFSET)
-#define HSDRAMC1_BF(name,value) \
- (((value) & ((1 << HSDRAMC1_##name##_SIZE) - 1)) \
- << HSDRAMC1_##name##_OFFSET)
-#define HSDRAMC1_BFEXT(name,value) \
- (((value) >> HSDRAMC1_##name##_OFFSET) \
- & ((1 << HSDRAMC1_##name##_SIZE) - 1))
-#define HSDRAMC1_BFINS(name,value,old) \
- (((old) & ~(((1 << HSDRAMC1_##name##_SIZE) - 1) \
- << HSDRAMC1_##name##_OFFSET)) \
- | HSDRAMC1_BF(name,value))
-
-/* Register access macros */
-#define hsdramc1_readl(reg) \
- readl((void *)ATMEL_BASE_HSDRAMC + HSDRAMC1_##reg)
-#define hsdramc1_writel(reg,value) \
- writel((value), (void *)ATMEL_BASE_HSDRAMC + HSDRAMC1_##reg)
-
-#endif /* __ASM_AVR32_HSDRAMC1_H__ */
diff --git a/arch/avr32/cpu/hsmc3.h b/arch/avr32/cpu/hsmc3.h
deleted file mode 100644
index ac472952a2..0000000000
--- a/arch/avr32/cpu/hsmc3.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * Register definitions for Static Memory Controller
- */
-#ifndef __CPU_AT32AP_HSMC3_H__
-#define __CPU_AT32AP_HSMC3_H__
-
-/* HSMC3 register offsets */
-#define HSMC3_SETUP0 0x0000
-#define HSMC3_PULSE0 0x0004
-#define HSMC3_CYCLE0 0x0008
-#define HSMC3_MODE0 0x000c
-#define HSMC3_SETUP1 0x0010
-#define HSMC3_PULSE1 0x0014
-#define HSMC3_CYCLE1 0x0018
-#define HSMC3_MODE1 0x001c
-#define HSMC3_SETUP2 0x0020
-#define HSMC3_PULSE2 0x0024
-#define HSMC3_CYCLE2 0x0028
-#define HSMC3_MODE2 0x002c
-#define HSMC3_SETUP3 0x0030
-#define HSMC3_PULSE3 0x0034
-#define HSMC3_CYCLE3 0x0038
-#define HSMC3_MODE3 0x003c
-#define HSMC3_SETUP4 0x0040
-#define HSMC3_PULSE4 0x0044
-#define HSMC3_CYCLE4 0x0048
-#define HSMC3_MODE4 0x004c
-#define HSMC3_SETUP5 0x0050
-#define HSMC3_PULSE5 0x0054
-#define HSMC3_CYCLE5 0x0058
-#define HSMC3_MODE5 0x005c
-
-/* Bitfields in SETUP0 */
-#define HSMC3_NWE_SETUP_OFFSET 0
-#define HSMC3_NWE_SETUP_SIZE 6
-#define HSMC3_NCS_WR_SETUP_OFFSET 8
-#define HSMC3_NCS_WR_SETUP_SIZE 6
-#define HSMC3_NRD_SETUP_OFFSET 16
-#define HSMC3_NRD_SETUP_SIZE 6
-#define HSMC3_NCS_RD_SETUP_OFFSET 24
-#define HSMC3_NCS_RD_SETUP_SIZE 6
-
-/* Bitfields in PULSE0 */
-#define HSMC3_NWE_PULSE_OFFSET 0
-#define HSMC3_NWE_PULSE_SIZE 7
-#define HSMC3_NCS_WR_PULSE_OFFSET 8
-#define HSMC3_NCS_WR_PULSE_SIZE 7
-#define HSMC3_NRD_PULSE_OFFSET 16
-#define HSMC3_NRD_PULSE_SIZE 7
-#define HSMC3_NCS_RD_PULSE_OFFSET 24
-#define HSMC3_NCS_RD_PULSE_SIZE 7
-
-/* Bitfields in CYCLE0 */
-#define HSMC3_NWE_CYCLE_OFFSET 0
-#define HSMC3_NWE_CYCLE_SIZE 9
-#define HSMC3_NRD_CYCLE_OFFSET 16
-#define HSMC3_NRD_CYCLE_SIZE 9
-
-/* Bitfields in MODE0 */
-#define HSMC3_READ_MODE_OFFSET 0
-#define HSMC3_READ_MODE_SIZE 1
-#define HSMC3_WRITE_MODE_OFFSET 1
-#define HSMC3_WRITE_MODE_SIZE 1
-#define HSMC3_EXNW_MODE_OFFSET 4
-#define HSMC3_EXNW_MODE_SIZE 2
-#define HSMC3_BAT_OFFSET 8
-#define HSMC3_BAT_SIZE 1
-#define HSMC3_DBW_OFFSET 12
-#define HSMC3_DBW_SIZE 2
-#define HSMC3_TDF_CYCLES_OFFSET 16
-#define HSMC3_TDF_CYCLES_SIZE 4
-#define HSMC3_TDF_MODE_OFFSET 20
-#define HSMC3_TDF_MODE_SIZE 1
-#define HSMC3_PMEN_OFFSET 24
-#define HSMC3_PMEN_SIZE 1
-#define HSMC3_PS_OFFSET 28
-#define HSMC3_PS_SIZE 2
-
-/* Bitfields in MODE1 */
-#define HSMC3_PD_OFFSET 28
-#define HSMC3_PD_SIZE 2
-
-/* Constants for READ_MODE */
-#define HSMC3_READ_MODE_NCS_CONTROLLED 0
-#define HSMC3_READ_MODE_NRD_CONTROLLED 1
-
-/* Constants for WRITE_MODE */
-#define HSMC3_WRITE_MODE_NCS_CONTROLLED 0
-#define HSMC3_WRITE_MODE_NWE_CONTROLLED 1
-
-/* Constants for EXNW_MODE */
-#define HSMC3_EXNW_MODE_DISABLED 0
-#define HSMC3_EXNW_MODE_RESERVED 1
-#define HSMC3_EXNW_MODE_FROZEN 2
-#define HSMC3_EXNW_MODE_READY 3
-
-/* Constants for BAT */
-#define HSMC3_BAT_BYTE_SELECT 0
-#define HSMC3_BAT_BYTE_WRITE 1
-
-/* Constants for DBW */
-#define HSMC3_DBW_8_BITS 0
-#define HSMC3_DBW_16_BITS 1
-#define HSMC3_DBW_32_BITS 2
-
-/* Bit manipulation macros */
-#define HSMC3_BIT(name) \
- (1 << HSMC3_##name##_OFFSET)
-#define HSMC3_BF(name,value) \
- (((value) & ((1 << HSMC3_##name##_SIZE) - 1)) \
- << HSMC3_##name##_OFFSET)
-#define HSMC3_BFEXT(name,value) \
- (((value) >> HSMC3_##name##_OFFSET) \
- & ((1 << HSMC3_##name##_SIZE) - 1))
-#define HSMC3_BFINS(name,value,old)\
- (((old) & ~(((1 << HSMC3_##name##_SIZE) - 1) \
- << HSMC3_##name##_OFFSET)) \
- | HSMC3_BF(name,value))
-
-/* Register access macros */
-#define hsmc3_readl(reg) \
- readl((void *)ATMEL_BASE_HSMC + HSMC3_##reg)
-#define hsmc3_writel(reg,value) \
- writel((value), (void *)ATMEL_BASE_HSMC + HSMC3_##reg)
-
-#endif /* __CPU_AT32AP_HSMC3_H__ */
diff --git a/arch/avr32/cpu/interrupts.c b/arch/avr32/cpu/interrupts.c
deleted file mode 100644
index de202207ce..0000000000
--- a/arch/avr32/cpu/interrupts.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-#include <div64.h>
-
-#include <linux/errno.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/sysreg.h>
-
-#include <asm/arch/hardware.h>
-
-#define HANDLER_MASK 0x00ffffff
-#define INTLEV_SHIFT 30
-#define INTLEV_MASK 0x00000003
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* Incremented whenever COUNT reaches 0xffffffff by timer_interrupt_handler */
-volatile unsigned long timer_overflow;
-
-/*
- * Instead of dividing by get_tbclk(), multiply by this constant and
- * right-shift the result by 32 bits.
- */
-static unsigned long tb_factor;
-
-unsigned long get_tbclk(void)
-{
- return gd->arch.cpu_hz;
-}
-
-unsigned long long get_ticks(void)
-{
- unsigned long lo, hi_now, hi_prev;
-
- do {
- hi_prev = timer_overflow;
- lo = sysreg_read(COUNT);
- hi_now = timer_overflow;
- } while (hi_prev != hi_now);
-
- return ((unsigned long long)hi_now << 32) | lo;
-}
-
-unsigned long get_timer(unsigned long base)
-{
- u64 now = get_ticks();
-
- now *= tb_factor;
- return (unsigned long)(now >> 32) - base;
-}
-
-/*
- * For short delays only. It will overflow after a few seconds.
- */
-void __udelay(unsigned long usec)
-{
- unsigned long cycles;
- unsigned long base;
- unsigned long now;
-
- base = sysreg_read(COUNT);
- cycles = ((usec * (get_tbclk() / 10000)) + 50) / 100;
-
- do {
- now = sysreg_read(COUNT);
- } while ((now - base) < cycles);
-}
-
-static int set_interrupt_handler(unsigned int nr, void (*handler)(void),
- unsigned int priority)
-{
- extern void _evba(void);
- unsigned long intpr;
- unsigned long handler_addr = (unsigned long)handler;
-
- handler_addr -= (unsigned long)&_evba;
-
- if ((handler_addr & HANDLER_MASK) != handler_addr
- || (priority & INTLEV_MASK) != priority)
- return -EINVAL;
-
- intpr = (handler_addr & HANDLER_MASK);
- intpr |= (priority & INTLEV_MASK) << INTLEV_SHIFT;
- writel(intpr, (void *)ATMEL_BASE_INTC + 4 * nr);
-
- return 0;
-}
-
-int timer_init(void)
-{
- extern void timer_interrupt_handler(void);
- u64 tmp;
-
- sysreg_write(COUNT, 0);
-
- tmp = (u64)CONFIG_SYS_HZ << 32;
- tmp += gd->arch.cpu_hz / 2;
- do_div(tmp, gd->arch.cpu_hz);
- tb_factor = (u32)tmp;
-
- if (set_interrupt_handler(0, &timer_interrupt_handler, 3))
- return -EINVAL;
-
- /* For all practical purposes, this gives us an overflow interrupt */
- sysreg_write(COMPARE, 0xffffffff);
- return 0;
-}
diff --git a/arch/avr32/cpu/mmc.c b/arch/avr32/cpu/mmc.c
deleted file mode 100644
index 26ba3a24e4..0000000000
--- a/arch/avr32/cpu/mmc.c
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- * Copyright (C) 2015 Andreas Bießmann <andreas@biessmann.org>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-#include <atmel_mci.h>
-#include <asm/arch/hardware.h>
-
-/* provide cpu_mmc_init, to overwrite provide board_mmc_init */
-int cpu_mmc_init(bd_t *bd)
-{
- /* This calls the atmel_mci_init in gen_atmel_mci.c */
- return atmel_mci_init((void *)ATMEL_BASE_MMCI);
-}
diff --git a/arch/avr32/cpu/portmux-gpio.c b/arch/avr32/cpu/portmux-gpio.c
deleted file mode 100644
index 640852c2c0..0000000000
--- a/arch/avr32/cpu/portmux-gpio.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Copyright (C) 2008 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/gpio.h>
-
-void portmux_select_peripheral(void *port, unsigned long pin_mask,
- enum portmux_function func, unsigned long flags)
-{
- /* Both pull-up and pull-down set means buskeeper */
- if (flags & PORTMUX_PULL_DOWN)
- gpio_writel(port, PDERS, pin_mask);
- else
- gpio_writel(port, PDERC, pin_mask);
- if (flags & PORTMUX_PULL_UP)
- gpio_writel(port, PUERS, pin_mask);
- else
- gpio_writel(port, PUERC, pin_mask);
-
- /* Select drive strength */
- if (flags & PORTMUX_DRIVE_LOW)
- gpio_writel(port, ODCR0S, pin_mask);
- else
- gpio_writel(port, ODCR0C, pin_mask);
- if (flags & PORTMUX_DRIVE_HIGH)
- gpio_writel(port, ODCR1S, pin_mask);
- else
- gpio_writel(port, ODCR1C, pin_mask);
-
- /* Select function */
- if (func & PORTMUX_FUNC_B)
- gpio_writel(port, PMR0S, pin_mask);
- else
- gpio_writel(port, PMR0C, pin_mask);
- if (func & PORTMUX_FUNC_C)
- gpio_writel(port, PMR1S, pin_mask);
- else
- gpio_writel(port, PMR1C, pin_mask);
-
- /* Disable GPIO (i.e. enable peripheral) */
- gpio_writel(port, GPERC, pin_mask);
-}
-
-void portmux_select_gpio(void *port, unsigned long pin_mask,
- unsigned long flags)
-{
- /* Both pull-up and pull-down set means buskeeper */
- if (flags & PORTMUX_PULL_DOWN)
- gpio_writel(port, PDERS, pin_mask);
- else
- gpio_writel(port, PDERC, pin_mask);
- if (flags & PORTMUX_PULL_UP)
- gpio_writel(port, PUERS, pin_mask);
- else
- gpio_writel(port, PUERC, pin_mask);
-
- /* Enable open-drain mode if requested */
- if (flags & PORTMUX_OPEN_DRAIN)
- gpio_writel(port, ODMERS, pin_mask);
- else
- gpio_writel(port, ODMERC, pin_mask);
-
- /* Select drive strength */
- if (flags & PORTMUX_DRIVE_LOW)
- gpio_writel(port, ODCR0S, pin_mask);
- else
- gpio_writel(port, ODCR0C, pin_mask);
- if (flags & PORTMUX_DRIVE_HIGH)
- gpio_writel(port, ODCR1S, pin_mask);
- else
- gpio_writel(port, ODCR1C, pin_mask);
-
- /* Select direction and initial pin state */
- if (flags & PORTMUX_DIR_OUTPUT) {
- if (flags & PORTMUX_INIT_HIGH)
- gpio_writel(port, OVRS, pin_mask);
- else
- gpio_writel(port, OVRC, pin_mask);
- gpio_writel(port, ODERS, pin_mask);
- } else {
- gpio_writel(port, ODERC, pin_mask);
- }
-
- /* Enable GPIO */
- gpio_writel(port, GPERS, pin_mask);
-}
diff --git a/arch/avr32/cpu/portmux-pio.c b/arch/avr32/cpu/portmux-pio.c
deleted file mode 100644
index 8ce51e64df..0000000000
--- a/arch/avr32/cpu/portmux-pio.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * Copyright (C) 2006, 2008 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/gpio.h>
-
-void portmux_select_peripheral(void *port, unsigned long pin_mask,
- enum portmux_function func, unsigned long flags)
-{
- if (flags & PORTMUX_PULL_UP)
- pio_writel(port, PUER, pin_mask);
- else
- pio_writel(port, PUDR, pin_mask);
-
- switch (func) {
- case PORTMUX_FUNC_A:
- pio_writel(port, ASR, pin_mask);
- break;
- case PORTMUX_FUNC_B:
- pio_writel(port, BSR, pin_mask);
- break;
- }
-
- pio_writel(port, PDR, pin_mask);
-}
-
-void portmux_select_gpio(void *port, unsigned long pin_mask,
- unsigned long flags)
-{
- if (flags & PORTMUX_PULL_UP)
- pio_writel(port, PUER, pin_mask);
- else
- pio_writel(port, PUDR, pin_mask);
-
- if (flags & PORTMUX_OPEN_DRAIN)
- pio_writel(port, MDER, pin_mask);
- else
- pio_writel(port, MDDR, pin_mask);
-
- if (flags & PORTMUX_DIR_OUTPUT) {
- if (flags & PORTMUX_INIT_HIGH)
- pio_writel(port, SODR, pin_mask);
- else
- pio_writel(port, CODR, pin_mask);
- pio_writel(port, OER, pin_mask);
- } else {
- pio_writel(port, ODR, pin_mask);
- }
-
- pio_writel(port, PER, pin_mask);
-}
-
-void pio_set_output_value(unsigned int pin, int value)
-{
- void *port = pio_pin_to_port(pin);
-
- if (!port)
- panic("Invalid GPIO pin %u\n", pin);
-
- __pio_set_output_value(port, pin & 0x1f, value);
-}
-
-int pio_get_input_value(unsigned int pin)
-{
- void *port = pio_pin_to_port(pin);
-
- if (!port)
- panic("Invalid GPIO pin %u\n", pin);
-
- return __pio_get_input_value(port, pin & 0x1f);
-}
diff --git a/arch/avr32/cpu/start.S b/arch/avr32/cpu/start.S
deleted file mode 100644
index 14a0269a54..0000000000
--- a/arch/avr32/cpu/start.S
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * Copyright (C) 2005-2008 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <asm-offsets.h>
-#include <config.h>
-#include <asm/ptrace.h>
-#include <asm/sysreg.h>
-
-#define SYSREG_MMUCR_I_OFFSET 2
-#define SYSREG_MMUCR_S_OFFSET 4
-
-#define SR_INIT (SYSREG_BIT(GM) | SYSREG_BIT(EM) | SYSREG_BIT(M0))
-/* due to errata (unreliable branch folding) clear FE bit explicitly */
-#define CPUCR_INIT ((SYSREG_BIT(BI) | SYSREG_BIT(BE) \
- | SYSREG_BIT(RE) | SYSREG_BIT(IBE) \
- | SYSREG_BIT(IEE)) & ~SYSREG_BIT(FE))
-
- /*
- * To save some space, we use the same entry point for
- * exceptions and reset. This avoids lots of alignment padding
- * since the reset vector is always suitably aligned.
- */
- .section .exception.text, "ax", @progbits
- .global _start
- .global _evba
- .type _start, @function
- .type _evba, @function
-_start:
- .size _start, 0
-_evba:
- .org 0x00
- rjmp unknown_exception /* Unrecoverable exception */
- .org 0x04
- rjmp unknown_exception /* TLB multiple hit */
- .org 0x08
- rjmp unknown_exception /* Bus error data fetch */
- .org 0x0c
- rjmp unknown_exception /* Bus error instruction fetch */
- .org 0x10
- rjmp unknown_exception /* NMI */
- .org 0x14
- rjmp unknown_exception /* Instruction address */
- .org 0x18
- rjmp unknown_exception /* ITLB protection */
- .org 0x1c
- rjmp unknown_exception /* Breakpoint */
- .org 0x20
- rjmp unknown_exception /* Illegal opcode */
- .org 0x24
- rjmp unknown_exception /* Unimplemented instruction */
- .org 0x28
- rjmp unknown_exception /* Privilege violation */
- .org 0x2c
- rjmp unknown_exception /* Floating-point */
- .org 0x30
- rjmp unknown_exception /* Coprocessor absent */
- .org 0x34
- rjmp unknown_exception /* Data Address (read) */
- .org 0x38
- rjmp unknown_exception /* Data Address (write) */
- .org 0x3c
- rjmp unknown_exception /* DTLB Protection (read) */
- .org 0x40
- rjmp unknown_exception /* DTLB Protection (write) */
- .org 0x44
- rjmp unknown_exception /* DTLB Modified */
-
- .org 0x50 /* ITLB Miss */
- pushm r8-r12,lr
- rjmp 1f
- .org 0x60 /* DTLB Miss (read) */
- pushm r8-r12,lr
- rjmp 1f
- .org 0x70 /* DTLB Miss (write) */
- pushm r8-r12,lr
-1: mov r12, sp
- rcall mmu_handle_tlb_miss
- popm r8-r12,lr
- brne unknown_exception
- rete
-
- .size _evba, . - _evba
-
- .align 2
- .type unknown_exception, @function
-unknown_exception:
- /* Figure out whether we're handling an exception (Exception
- * mode) or just booting (Supervisor mode). */
- csrfcz SYSREG_M1_OFFSET
- brcc at32ap_cpu_bootstrap
-
- /* This is an exception. Complain. */
- pushm r0-r12
- sub r8, sp, REG_R12 - REG_R0 - 4
- mov r9, lr
- mfsr r10, SYSREG_RAR_EX
- mfsr r11, SYSREG_RSR_EX
- pushm r8-r11
- mfsr r12, SYSREG_ECR
- mov r11, sp
- rcall do_unknown_exception
-1: rjmp 1b
-
- /* The COUNT/COMPARE timer interrupt handler */
- .global timer_interrupt_handler
- .type timer_interrupt_handler, at function
- .align 2
-timer_interrupt_handler:
- /*
- * Increment timer_overflow and re-write COMPARE with 0xffffffff.
- *
- * We're running at interrupt level 3, so we don't need to save
- * r8-r12 or lr to the stack.
- */
- lda.w r8, timer_overflow
- ld.w r9, r8[0]
- mov r10, -1
- mtsr SYSREG_COMPARE, r10
- sub r9, -1
- st.w r8[0], r9
- rete
-
- /*
- * CPU bootstrap after reset is handled here. SoC code may
- * override this in case they need to initialize oscillators,
- * etc.
- */
- .section .text.at32ap_cpu_bootstrap, "ax", @progbits
- .global at32ap_cpu_bootstrap
- .weak at32ap_cpu_bootstrap
- .type at32ap_cpu_bootstrap, @function
- .align 2
-at32ap_cpu_bootstrap:
- /* Reset the Status Register */
- mov r0, lo(SR_INIT)
- orh r0, hi(SR_INIT)
- mtsr SYSREG_SR, r0
-
- /* Reset CPUCR and invalidate the BTB */
- mov r2, CPUCR_INIT
- mtsr SYSREG_CPUCR, r2
-
- /* Flush the caches */
- mov r1, 0
- cache r1[4], 8
- cache r1[0], 0
- sync 0
-
- /* Reset the MMU to default settings */
- mov r0, SYSREG_BIT(MMUCR_S) | SYSREG_BIT(MMUCR_I)
- mtsr SYSREG_MMUCR, r0
-
- /* Internal RAM should not need any initialization. We might
- have to initialize external RAM here if the part doesn't
- have internal RAM (or we may use the data cache) */
-
- /* Jump to cacheable segment */
- lddpc pc, 1f
-
- .align 2
-1: .long at32ap_low_level_init
- .size _start, . - _start
-
- /* Common CPU bootstrap code after oscillator/cache/etc. init */
- .section .text.avr32ap_low_level_init, "ax", @progbits
- .global at32ap_low_level_init
- .type at32ap_low_level_init, @function
- .align 2
-at32ap_low_level_init:
- lddpc sp, sp_init
-
- /* Initialize the GOT pointer */
- lddpc r6, got_init
-3: rsub r6, pc
-
- /* Let's go */
- rjmp board_init_f
-
- .align 2
- .type sp_init, at object
-sp_init:
- .long CONFIG_SYS_INIT_SP_ADDR
-got_init:
- .long 3b - _GLOBAL_OFFSET_TABLE_
-
- /*
- * void relocate_code(new_sp, new_gd, monitor_addr)
- *
- * Relocate the u-boot image into RAM and continue from there.
- * Does not return.
- */
- .section .text.relocate_code,"ax", at progbits
- .global relocate_code
- .type relocate_code, at function
-relocate_code:
- mov sp, r12 /* use new stack */
- mov r12, r11 /* save new_gd */
- mov r11, r10 /* save destination address */
-
- /* copy .text section and flush the cache along the way */
- lda.w r8, _text
- lda.w r9, _etext
- sub lr, r10, r8 /* relocation offset */
-
-1: ldm r8++, r0-r3
- stm r10, r0-r3
- sub r10, -16
- ldm r8++, r0-r3
- stm r10, r0-r3
- sub r10, -16
- cp.w r8, r9
- cache r10[-4], 0x0d /* dcache clean/invalidate */
- cache r10[-4], 0x01 /* icache invalidate */
- brlt 1b
-
- /* flush write buffer */
- sync 0
-
- /* copy data sections */
- lda.w r9, _edata
-1: ld.d r0, r8++
- st.d r10++, r0
- cp.w r8, r9
- brlt 1b
-
- /* zero out .bss */
- mov r0, 0
- mov r1, 0
- lda.w r9, __bss_end
- sub r9, r8
-1: st.d r10++, r0
- sub r9, 8
- brgt 1b
-
- /* jump to RAM */
- sub r0, pc, . - in_ram
- add pc, r0, lr
-
- .align 2
-in_ram:
- /* find the new GOT and relocate it */
- lddpc r6, got_init_reloc
-3: rsub r6, pc
- mov r8, r6
- lda.w r9, _egot
- lda.w r10, _got
- sub r9, r10
-1: ld.w r0, r8[0]
- add r0, lr
- st.w r8++, r0
- sub r9, 4
- brgt 1b
-
- /* Move the exception handlers */
- mfsr r2, SYSREG_EVBA
- add r2, lr
- mtsr SYSREG_EVBA, r2
-
- /* Do the rest of the initialization sequence */
- call board_init_r
-
- .align 2
-got_init_reloc:
- .long 3b - _GLOBAL_OFFSET_TABLE_
-
- .size relocate_code, . - relocate_code
diff --git a/arch/avr32/cpu/u-boot.lds b/arch/avr32/cpu/u-boot.lds
deleted file mode 100644
index b0180e3534..0000000000
--- a/arch/avr32/cpu/u-boot.lds
+++ /dev/null
@@ -1,58 +0,0 @@
-/* -*- Fundamental -*-
- *
- * Copyright (C) 2005-2006 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-OUTPUT_FORMAT("elf32-avr32", "elf32-avr32", "elf32-avr32")
-OUTPUT_ARCH(avr32)
-ENTRY(_start)
-
-SECTIONS
-{
- . = 0;
- _text = .;
- .text : {
- *(.exception.text)
- *(.text)
- *(.text.*)
- }
- _etext = .;
-
- .rodata : {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
-
- . = ALIGN(8);
- _data = .;
- .data : {
- *(.data)
- *(.data.*)
- }
-
- . = ALIGN(4);
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
- . = ALIGN(4);
- _got = .;
- .got : {
- *(.got)
- }
- _egot = .;
-
- . = ALIGN(8);
- _edata = .;
-
- .bss (NOLOAD) : {
- __bss_start = .;
- *(.bss)
- *(.bss.*)
- }
- . = ALIGN(8);
- __bss_end = .;
- __init_end = .;
-}
diff --git a/arch/avr32/include/asm/arch-at32ap700x/addrspace.h b/arch/avr32/include/asm/arch-at32ap700x/addrspace.h
deleted file mode 100644
index 7b25e2efe6..0000000000
--- a/arch/avr32/include/asm/arch-at32ap700x/addrspace.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __ASM_AVR32_ADDRSPACE_H
-#define __ASM_AVR32_ADDRSPACE_H
-
-#include <asm/types.h>
-
-/* Memory segments when segmentation is enabled */
-#define P0SEG 0x00000000
-#define P1SEG 0x80000000
-#define P2SEG 0xa0000000
-#define P3SEG 0xc0000000
-#define P4SEG 0xe0000000
-
-/* Returns the privileged segment base of a given address */
-#define PXSEG(a) (((unsigned long)(a)) & 0xe0000000)
-
-/* Returns the physical address of a PnSEG (n=1,2) address */
-#define PHYSADDR(a) (((unsigned long)(a)) & 0x1fffffff)
-
-/*
- * Map an address to a certain privileged segment
- */
-#define P1SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P1SEG))
-#define P2SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P2SEG))
-#define P3SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG))
-#define P4SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG))
-
-/* virt_to_phys will only work when address is in P1 or P2 */
-static inline unsigned long virt_to_phys(volatile void *address)
-{
- return PHYSADDR(address);
-}
-
-static inline void * phys_to_virt(unsigned long address)
-{
- return (void *)P1SEGADDR(address);
-}
-
-#define cached(addr) ((void *)P1SEGADDR(addr))
-#define uncached(addr) ((void *)P2SEGADDR(addr))
-
-/*
- * Given a physical address and a length, return a virtual address
- * that can be used to access the memory range with the caching
- * properties specified by "flags".
- *
- * This implementation works for memory below 512MiB (flash, etc.) as
- * well as above 3.5GiB (internal peripherals.)
- */
-#define MAP_NOCACHE (0)
-#define MAP_WRCOMBINE (1 << 7)
-#define MAP_WRBACK (MAP_WRCOMBINE | (1 << 9))
-#define MAP_WRTHROUGH (MAP_WRBACK | (1 << 0))
-
-static inline void *
-map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
-{
- return (void *)paddr;
-}
-
-#endif /* __ASM_AVR32_ADDRSPACE_H */
diff --git a/arch/avr32/include/asm/arch-at32ap700x/cacheflush.h b/arch/avr32/include/asm/arch-at32ap700x/cacheflush.h
deleted file mode 100644
index e08cd9de6d..0000000000
--- a/arch/avr32/include/asm/arch-at32ap700x/cacheflush.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __ASM_AVR32_CACHEFLUSH_H
-#define __ASM_AVR32_CACHEFLUSH_H
-
-/*
- * Invalidate any cacheline containing virtual address vaddr without
- * writing anything back to memory.
- *
- * Note that this function may corrupt unrelated data structures when
- * applied on buffers that are not cacheline aligned in both ends.
- */
-static inline void dcache_invalidate_line(volatile void *vaddr)
-{
- asm volatile("cache %0[0], 0x0b" : : "r"(vaddr) : "memory");
-}
-
-/*
- * Make sure any cacheline containing virtual address vaddr is written
- * to memory.
- */
-static inline void dcache_clean_line(volatile void *vaddr)
-{
- asm volatile("cache %0[0], 0x0c" : : "r"(vaddr) : "memory");
-}
-
-/*
- * Make sure any cacheline containing virtual address vaddr is written
- * to memory and then invalidate it.
- */
-static inline void dcache_flush_line(volatile void *vaddr)
-{
- asm volatile("cache %0[0], 0x0d" : : "r"(vaddr) : "memory");
-}
-
-/*
- * Invalidate any instruction cacheline containing virtual address
- * vaddr.
- */
-static inline void icache_invalidate_line(volatile void *vaddr)
-{
- asm volatile("cache %0[0], 0x01" : : "r"(vaddr) : "memory");
-}
-
-/*
- * Applies the above functions on all lines that are touched by the
- * specified virtual address range.
- */
-void dcache_clean_range(volatile void *start, size_t len);
-void icache_invalidate_range(volatile void *start, size_t len);
-
-static inline void dcache_flush_unlocked(void)
-{
- asm volatile("cache %0[5], 0x08" : : "r"(0) : "memory");
-}
-
-/*
- * Make sure any pending writes are completed before continuing.
- */
-#define sync_write_buffer() asm volatile("sync 0" : : : "memory")
-
-#endif /* __ASM_AVR32_CACHEFLUSH_H */
diff --git a/arch/avr32/include/asm/arch-at32ap700x/chip-features.h b/arch/avr32/include/asm/arch-at32ap700x/chip-features.h
deleted file mode 100644
index 822286df5f..0000000000
--- a/arch/avr32/include/asm/arch-at32ap700x/chip-features.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (C) 2007 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __ASM_AVR32_ARCH_CHIP_FEATURES_H__
-#define __ASM_AVR32_ARCH_CHIP_FEATURES_H__
-
-/* Currently, all the AP700x chips have these */
-#define AT32AP700x_CHIP_HAS_USART
-#define AT32AP700x_CHIP_HAS_MMCI
-#define AT32AP700x_CHIP_HAS_SPI
-
-/* Only AP7000 has ethernet interface */
-#ifdef CONFIG_AT32AP7000
-#define AT32AP700x_CHIP_HAS_MACB
-#endif
-
-/* AP7000 and AP7002 have LCD controller, but AP7001 does not */
-#if defined(CONFIG_AT32AP7000) || defined(CONFIG_AT32AP7002)
-#define AT32AP700x_CHIP_HAS_LCDC
-#endif
-
-#endif /* __ASM_AVR32_ARCH_CHIP_FEATURES_H__ */
diff --git a/arch/avr32/include/asm/arch-at32ap700x/clk.h b/arch/avr32/include/asm/arch-at32ap700x/clk.h
deleted file mode 100644
index 0721899fde..0000000000
--- a/arch/avr32/include/asm/arch-at32ap700x/clk.h
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __ASM_AVR32_ARCH_CLK_H__
-#define __ASM_AVR32_ARCH_CLK_H__
-
-#include <asm/arch/chip-features.h>
-#include <asm/arch/portmux.h>
-
-#ifdef CONFIG_PLL
-#define PLL0_RATE ((CONFIG_SYS_OSC0_HZ / CONFIG_SYS_PLL0_DIV) \
- * CONFIG_SYS_PLL0_MUL)
-#define MAIN_CLK_RATE PLL0_RATE
-#else
-#define MAIN_CLK_RATE (CONFIG_SYS_OSC0_HZ)
-#endif
-
-static inline unsigned long get_cpu_clk_rate(void)
-{
- return MAIN_CLK_RATE >> CONFIG_SYS_CLKDIV_CPU;
-}
-static inline unsigned long get_hsb_clk_rate(void)
-{
- return MAIN_CLK_RATE >> CONFIG_SYS_CLKDIV_HSB;
-}
-static inline unsigned long get_pba_clk_rate(void)
-{
- return MAIN_CLK_RATE >> CONFIG_SYS_CLKDIV_PBA;
-}
-static inline unsigned long get_pbb_clk_rate(void)
-{
- return MAIN_CLK_RATE >> CONFIG_SYS_CLKDIV_PBB;
-}
-
-/* Accessors for specific devices. More will be added as needed. */
-static inline unsigned long get_sdram_clk_rate(void)
-{
- return get_hsb_clk_rate();
-}
-#ifdef AT32AP700x_CHIP_HAS_USART
-static inline unsigned long get_usart_clk_rate(unsigned int dev_id)
-{
- return get_pba_clk_rate();
-}
-#endif
-#ifdef AT32AP700x_CHIP_HAS_MACB
-static inline unsigned long get_macb_pclk_rate(unsigned int dev_id)
-{
- return get_pbb_clk_rate();
-}
-static inline unsigned long get_macb_hclk_rate(unsigned int dev_id)
-{
- return get_hsb_clk_rate();
-}
-#endif
-#ifdef AT32AP700x_CHIP_HAS_MMCI
-static inline unsigned long get_mci_clk_rate(void)
-{
- return get_pbb_clk_rate();
-}
-#endif
-#ifdef AT32AP700x_CHIP_HAS_SPI
-static inline unsigned long get_spi_clk_rate(unsigned int dev_id)
-{
- return get_pba_clk_rate();
-}
-#endif
-#ifdef AT32AP700x_CHIP_HAS_LCDC
-static inline unsigned long get_lcdc_clk_rate(unsigned int dev_id)
-{
- return get_hsb_clk_rate();
-}
-#endif
-
-extern void clk_init(void);
-
-/* Board code may need the SDRAM base clock as a compile-time constant */
-#define SDRAMC_BUS_HZ (MAIN_CLK_RATE >> CONFIG_SYS_CLKDIV_HSB)
-
-/* Generic clock control */
-enum gclk_parent {
- GCLK_PARENT_OSC0 = 0,
- GCLK_PARENT_OSC1 = 1,
- GCLK_PARENT_PLL0 = 2,
- GCLK_PARENT_PLL1 = 3,
-};
-
-/* Some generic clocks have specific roles */
-#define GCLK_DAC_SAMPLE_CLK 6
-#define GCLK_LCDC_PIXCLK 7
-
-extern unsigned long __gclk_set_rate(unsigned int id, enum gclk_parent parent,
- unsigned long rate, unsigned long parent_rate);
-
-/**
- * gclk_set_rate - configure and enable a generic clock
- * @id: Which GCLK[id] to enable
- * @parent: Parent clock feeding the GCLK
- * @rate: Target rate of the GCLK in Hz
- *
- * Returns the actual GCLK rate in Hz, after rounding to the nearest
- * supported rate.
- *
- * All three parameters are usually constant, hence the inline.
- */
-static inline unsigned long gclk_set_rate(unsigned int id,
- enum gclk_parent parent, unsigned long rate)
-{
- unsigned long parent_rate;
-
- if (id > 7)
- return 0;
-
- switch (parent) {
- case GCLK_PARENT_OSC0:
- parent_rate = CONFIG_SYS_OSC0_HZ;
- break;
-#ifdef CONFIG_SYS_OSC1_HZ
- case GCLK_PARENT_OSC1:
- parent_rate = CONFIG_SYS_OSC1_HZ;
- break;
-#endif
-#ifdef PLL0_RATE
- case GCLK_PARENT_PLL0:
- parent_rate = PLL0_RATE;
- break;
-#endif
-#ifdef PLL1_RATE
- case GCLK_PARENT_PLL1:
- parent_rate = PLL1_RATE;
- break;
-#endif
- default:
- parent_rate = 0;
- break;
- }
-
- return __gclk_set_rate(id, parent, rate, parent_rate);
-}
-
-/**
- * gclk_enable_output - enable output on a GCLK pin
- * @id: Which GCLK[id] pin to enable
- * @drive_strength: Drive strength of external GCLK pin, if applicable
- */
-static inline void gclk_enable_output(unsigned int id,
- unsigned long drive_strength)
-{
- switch (id) {
- case 0:
- portmux_select_peripheral(PORTMUX_PORT_A, 1 << 30,
- PORTMUX_FUNC_A, drive_strength);
- break;
- case 1:
- portmux_select_peripheral(PORTMUX_PORT_A, 1 << 31,
- PORTMUX_FUNC_A, drive_strength);
- break;
- case 2:
- portmux_select_peripheral(PORTMUX_PORT_B, 1 << 19,
- PORTMUX_FUNC_A, drive_strength);
- break;
- case 3:
- portmux_select_peripheral(PORTMUX_PORT_B, 1 << 29,
- PORTMUX_FUNC_A, drive_strength);
- break;
- case 4:
- portmux_select_peripheral(PORTMUX_PORT_B, 1 << 30,
- PORTMUX_FUNC_A, drive_strength);
- break;
- }
-}
-
-#endif /* __ASM_AVR32_ARCH_CLK_H__ */
diff --git a/arch/avr32/include/asm/arch-at32ap700x/gpio.h b/arch/avr32/include/asm/arch-at32ap700x/gpio.h
deleted file mode 100644
index b5808c5d45..0000000000
--- a/arch/avr32/include/asm/arch-at32ap700x/gpio.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright (C) 2006, 2008 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __ASM_AVR32_ARCH_GPIO_H__
-#define __ASM_AVR32_ARCH_GPIO_H__
-
-#include <asm/arch/chip-features.h>
-#include <asm/arch/hardware.h>
-
-#define NR_GPIO_CONTROLLERS 5
-
-/*
- * Pin numbers identifying specific GPIO pins on the chip.
- */
-#define GPIO_PIOA_BASE (0)
-#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32)
-#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32)
-#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32)
-#define GPIO_PIOE_BASE (GPIO_PIOD_BASE + 32)
-#define GPIO_PIN_PA(x) (GPIO_PIOA_BASE + (x))
-#define GPIO_PIN_PB(x) (GPIO_PIOB_BASE + (x))
-#define GPIO_PIN_PC(x) (GPIO_PIOC_BASE + (x))
-#define GPIO_PIN_PD(x) (GPIO_PIOD_BASE + (x))
-#define GPIO_PIN_PE(x) (GPIO_PIOE_BASE + (x))
-
-static inline void *pio_pin_to_port(unsigned int pin)
-{
- switch (pin >> 5) {
- case 0:
- return (void *)ATMEL_BASE_PIOA;
- case 1:
- return (void *)ATMEL_BASE_PIOB;
- case 2:
- return (void *)ATMEL_BASE_PIOC;
- case 3:
- return (void *)ATMEL_BASE_PIOD;
- case 4:
- return (void *)ATMEL_BASE_PIOE;
- default:
- return NULL;
- }
-}
-
-#include <asm/arch-common/portmux-pio.h>
-
-#endif /* __ASM_AVR32_ARCH_GPIO_H__ */
diff --git a/arch/avr32/include/asm/arch-at32ap700x/hardware.h b/arch/avr32/include/asm/arch-at32ap700x/hardware.h
deleted file mode 100644
index 58ae965259..0000000000
--- a/arch/avr32/include/asm/arch-at32ap700x/hardware.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Copyright (C) 2005-2006 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __AT32AP7000_HARDWARE_H__
-#define __AT32AP7000_HARDWARE_H__
-
-/* Internal and external memories */
-#define EBI_SRAM_CS0_BASE 0x00000000
-#define EBI_SRAM_CS0_SIZE 0x04000000
-#define EBI_SRAM_CS4_BASE 0x04000000
-#define EBI_SRAM_CS4_SIZE 0x04000000
-#define EBI_SRAM_CS2_BASE 0x08000000
-#define EBI_SRAM_CS2_SIZE 0x04000000
-#define EBI_SRAM_CS3_BASE 0x0c000000
-#define EBI_SRAM_CS3_SIZE 0x04000000
-#define EBI_SRAM_CS1_BASE 0x10000000
-#define EBI_SRAM_CS1_SIZE 0x10000000
-#define EBI_SRAM_CS5_BASE 0x20000000
-#define EBI_SRAM_CS5_SIZE 0x04000000
-
-#define EBI_SDRAM_BASE EBI_SRAM_CS1_BASE
-#define EBI_SDRAM_SIZE EBI_SRAM_CS1_SIZE
-
-#define INTERNAL_SRAM_BASE 0x24000000
-#define INTERNAL_SRAM_SIZE 0x00008000
-
-/* Devices on the High Speed Bus (HSB) */
-#define LCDC_BASE 0xFF000000
-#define DMAC_BASE 0xFF200000
-#define USB_FIFO 0xFF300000
-
-/* Devices on Peripheral Bus A (PBA) */
-#define ATMEL_BASE_SPI0 0xFFE00000
-#define ATMEL_BASE_SPI1 0xFFE00400
-#define ATMEL_BASE_TWI0 0xFFE00800
-#define ATMEL_BASE_USART0 0xFFE00C00
-#define ATMEL_BASE_USART1 0xFFE01000
-#define ATMEL_BASE_USART2 0xFFE01400
-#define ATMEL_BASE_USART3 0xFFE01800
-#define ATMEL_BASE_SSC0 0xFFE01C00
-#define ATMEL_BASE_SSC1 0xFFE02000
-#define ATMEL_BASE_SSC2 0xFFE02400
-#define ATMEL_BASE_PIOA 0xFFE02800
-#define ATMEL_BASE_PIOB 0xFFE02C00
-#define ATMEL_BASE_PIOC 0xFFE03000
-#define ATMEL_BASE_PIOD 0xFFE03400
-#define ATMEL_BASE_PIOE 0xFFE03800
-#define ATMEL_BASE_PSIF 0xFFE03C00
-
-/* Devices on Peripheral Bus B (PBB) */
-#define ATMEL_BASE_SM 0xFFF00000
-#define ATMEL_BASE_INTC 0xFFF00400
-#define ATMEL_BASE_HMATRIX 0xFFF00800
-#define ATMEL_BASE_TIMER0 0xFFF00C00
-#define ATMEL_BASE_TIMER1 0xFFF01000
-#define ATMEL_BASE_PWM 0xFFF01400
-#define ATMEL_BASE_MACB0 0xFFF01800
-#define ATMEL_BASE_MACB1 0xFFF01C00
-#define ATMEL_BASE_DAC 0xFFF02000
-#define ATMEL_BASE_MMCI 0xFFF02400
-#define ATMEL_BASE_AUDIOC 0xFFF02800
-#define ATMEL_BASE_HISI 0xFFF02C00
-#define ATMEL_BASE_USB 0xFFF03000
-#define ATMEL_BASE_HSMC 0xFFF03400
-#define ATMEL_BASE_HSDRAMC 0xFFF03800
-#define ATMEL_BASE_ECC 0xFFF03C00
-
-#endif /* __AT32AP7000_HARDWARE_H__ */
diff --git a/arch/avr32/include/asm/arch-at32ap700x/hmatrix.h b/arch/avr32/include/asm/arch-at32ap700x/hmatrix.h
deleted file mode 100644
index d2a733fa40..0000000000
--- a/arch/avr32/include/asm/arch-at32ap700x/hmatrix.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Copyright (C) 2008 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __ASM_AVR32_ARCH_HMATRIX_H__
-#define __ASM_AVR32_ARCH_HMATRIX_H__
-
-#include <asm/hmatrix-common.h>
-
-/* Bitfields in SFR4 (EBI) */
-#define HMATRIX_EBI_SDRAM_ENABLE_OFFSET 1
-#define HMATRIX_EBI_SDRAM_ENABLE_SIZE 1
-#define HMATRIX_EBI_NAND_ENABLE_OFFSET 3
-#define HMATRIX_EBI_NAND_ENABLE_SIZE 1
-#define HMATRIX_EBI_CF0_ENABLE_OFFSET 4
-#define HMATRIX_EBI_CF0_ENABLE_SIZE 1
-#define HMATRIX_EBI_CF1_ENABLE_OFFSET 5
-#define HMATRIX_EBI_CF1_ENABLE_SIZE 1
-#define HMATRIX_EBI_PULLUP_DISABLE_OFFSET 8
-#define HMATRIX_EBI_PULLUP_DISABLE_SIZE 1
-
-/* HSB masters */
-#define HMATRIX_MASTER_CPU_DCACHE 0
-#define HMATRIX_MASTER_CPU_ICACHE 1
-#define HMATRIX_MASTER_PDC 2
-#define HMATRIX_MASTER_ISI 3
-#define HMATRIX_MASTER_USBA 4
-#define HMATRIX_MASTER_LCDC 5
-#define HMATRIX_MASTER_MACB0 6
-#define HMATRIX_MASTER_MACB1 7
-#define HMATRIX_MASTER_DMACA_M0 8
-#define HMATRIX_MASTER_DMACA_M1 9
-
-/* HSB slaves */
-#define HMATRIX_SLAVE_SRAM0 0
-#define HMATRIX_SLAVE_SRAM1 1
-#define HMATRIX_SLAVE_PBA 2
-#define HMATRIX_SLAVE_PBB 3
-#define HMATRIX_SLAVE_EBI 4
-#define HMATRIX_SLAVE_USBA 5
-#define HMATRIX_SLAVE_LCDC 6
-#define HMATRIX_SLAVE_DMACA 7
-
-#endif /* __ASM_AVR32_ARCH_HMATRIX_H__ */
diff --git a/arch/avr32/include/asm/arch-at32ap700x/mmu.h b/arch/avr32/include/asm/arch-at32ap700x/mmu.h
deleted file mode 100644
index 4736312f5d..0000000000
--- a/arch/avr32/include/asm/arch-at32ap700x/mmu.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * In order to deal with the hardcoded u-boot requirement that virtual
- * addresses are always mapped 1:1 with physical addresses, we implement
- * a small virtual memory manager so that we can use the MMU hardware in
- * order to get the caching properties right.
- *
- * A few pages (or possibly just one) are locked in the TLB permanently
- * in order to avoid recursive TLB misses, but most pages are faulted in
- * on demand.
- */
-#ifndef __ASM_ARCH_MMU_H
-#define __ASM_ARCH_MMU_H
-
-#include <asm/sysreg.h>
-
-#define MMU_PAGE_SHIFT 20
-#define MMU_PAGE_SIZE (1UL << MMU_PAGE_SHIFT)
-#define MMU_PAGE_ADDR_MASK (~(MMU_PAGE_SIZE - 1))
-
-#define MMU_VMR_CACHE_NONE \
- (SYSREG_BF(AP, 3) | SYSREG_BF(SZ, 3) | SYSREG_BIT(TLBELO_D))
-#define MMU_VMR_CACHE_WBUF \
- (MMU_VMR_CACHE_NONE | SYSREG_BIT(B))
-#define MMU_VMR_CACHE_WRTHRU \
- (MMU_VMR_CACHE_NONE | SYSREG_BIT(TLBELO_C) | SYSREG_BIT(W))
-#define MMU_VMR_CACHE_WRBACK \
- (MMU_VMR_CACHE_WBUF | SYSREG_BIT(TLBELO_C))
-
-/*
- * This structure is used in our "page table". Instead of the usual
- * x86-inspired radix tree, we let each entry cover an arbitrary-sized
- * virtual address range and store them in a binary search tree. This is
- * somewhat slower, but should use significantly less RAM, and we
- * shouldn't get many TLB misses when using 1 MB pages anyway.
- *
- * With 1 MB pages, we need 12 bits to store the page number. In
- * addition, we stick an Invalid bit in the high bit of virt_pgno (if
- * set, it cannot possibly match any faulting page), and all the bits
- * that need to be written to TLBELO in phys_pgno.
- */
-struct mmu_vm_range {
- uint16_t virt_pgno;
- uint16_t nr_pages;
- uint32_t phys;
-};
-
-/*
- * An array of mmu_vm_range objects describing all pageable addresses.
- * The array is sorted by virt_pgno so that the TLB miss exception
- * handler can do a binary search to find the correct entry.
- */
-extern struct mmu_vm_range mmu_vmr_table[];
-
-/*
- * Initialize the MMU. This will set up a fixed TLB entry for the static
- * u-boot image@dest_addr and enable paging.
- */
-void mmu_init_r(unsigned long dest_addr);
-
-/*
- * Handle a TLB miss exception. This function is called directly from
- * the exception vector table written in assembly.
- */
-int mmu_handle_tlb_miss(void);
-
-#endif /* __ASM_ARCH_MMU_H */
diff --git a/arch/avr32/include/asm/arch-at32ap700x/portmux.h b/arch/avr32/include/asm/arch-at32ap700x/portmux.h
deleted file mode 100644
index 7ae05408c0..0000000000
--- a/arch/avr32/include/asm/arch-at32ap700x/portmux.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * Copyright (C) 2006, 2008 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __ASM_AVR32_ARCH_PORTMUX_H__
-#define __ASM_AVR32_ARCH_PORTMUX_H__
-
-#include <asm/arch/gpio.h>
-
-#define PORTMUX_PORT_A ((void *)ATMEL_BASE_PIOA)
-#define PORTMUX_PORT_B ((void *)ATMEL_BASE_PIOB)
-#define PORTMUX_PORT_C ((void *)ATMEL_BASE_PIOC)
-#define PORTMUX_PORT_D ((void *)ATMEL_BASE_PIOD)
-#define PORTMUX_PORT_E ((void *)ATMEL_BASE_PIOE)
-
-void portmux_enable_ebi(unsigned int bus_width, unsigned int addr_width,
- unsigned long flags, unsigned long drive_strength);
-
-#define PORTMUX_EBI_CS(x) (1 << (x))
-#define PORTMUX_EBI_NAND (1 << 6)
-#define PORTMUX_EBI_CF(x) (1 << ((x) + 7))
-#define PORTMUX_EBI_NWAIT (1 << 9)
-
-#ifdef AT32AP700x_CHIP_HAS_USART
-static inline void portmux_enable_usart0(unsigned long drive_strength)
-{
- portmux_select_peripheral(PORTMUX_PORT_A, (1 << 8) | (1 << 9),
- PORTMUX_FUNC_B, 0);
-}
-
-static inline void portmux_enable_usart1(unsigned long drive_strength)
-{
- portmux_select_peripheral(PORTMUX_PORT_A, (1 << 17) | (1 << 18),
- PORTMUX_FUNC_A, 0);
-}
-
-static inline void portmux_enable_usart2(unsigned long drive_strength)
-{
- portmux_select_peripheral(PORTMUX_PORT_B, (1 << 26) | (1 << 27),
- PORTMUX_FUNC_B, 0);
-}
-
-static inline void portmux_enable_usart3(unsigned long drive_strength)
-{
- portmux_select_peripheral(PORTMUX_PORT_B, (1 << 17) | (1 << 18),
- PORTMUX_FUNC_B, 0);
-}
-#endif
-#ifdef AT32AP700x_CHIP_HAS_MACB
-void portmux_enable_macb0(unsigned long flags, unsigned long drive_strength);
-void portmux_enable_macb1(unsigned long flags, unsigned long drive_strength);
-
-#define PORTMUX_MACB_RMII (0)
-#define PORTMUX_MACB_MII (1 << 0)
-#define PORTMUX_MACB_SPEED (1 << 1)
-
-#endif
-#ifdef AT32AP700x_CHIP_HAS_MMCI
-void portmux_enable_mmci(unsigned int slot, unsigned long flags,
- unsigned long drive_strength);
-
-#define PORTMUX_MMCI_4BIT (1 << 0)
-#define PORTMUX_MMCI_8BIT (PORTMUX_MMCI_4BIT | (1 << 1))
-#define PORTMUX_MMCI_EXT_PULLUP (1 << 2)
-
-#endif
-#ifdef AT32AP700x_CHIP_HAS_SPI
-void portmux_enable_spi0(unsigned long cs_mask, unsigned long drive_strength);
-void portmux_enable_spi1(unsigned long cs_mask, unsigned long drive_strength);
-#endif
-#ifdef AT32AP700x_CHIP_HAS_LCDC
-void portmux_enable_lcdc(int pin_config);
-#endif
-
-#endif /* __ASM_AVR32_ARCH_PORTMUX_H__ */
diff --git a/arch/avr32/include/asm/arch-common/portmux-pio.h b/arch/avr32/include/asm/arch-common/portmux-pio.h
deleted file mode 100644
index 0d4d6e01e5..0000000000
--- a/arch/avr32/include/asm/arch-common/portmux-pio.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * Copyright (C) 2006, 2008 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __AVR32_PORTMUX_PIO_H__
-#define __AVR32_PORTMUX_PIO_H__
-
-#include <asm/io.h>
-
-/* PIO register offsets */
-#define PIO_PER 0x0000
-#define PIO_PDR 0x0004
-#define PIO_PSR 0x0008
-#define PIO_OER 0x0010
-#define PIO_ODR 0x0014
-#define PIO_OSR 0x0018
-#define PIO_IFER 0x0020
-#define PIO_IFDR 0x0024
-#define PIO_ISFR 0x0028
-#define PIO_SODR 0x0030
-#define PIO_CODR 0x0034
-#define PIO_ODSR 0x0038
-#define PIO_PDSR 0x003c
-#define PIO_IER 0x0040
-#define PIO_IDR 0x0044
-#define PIO_IMR 0x0048
-#define PIO_ISR 0x004c
-#define PIO_MDER 0x0050
-#define PIO_MDDR 0x0054
-#define PIO_MDSR 0x0058
-#define PIO_PUDR 0x0060
-#define PIO_PUER 0x0064
-#define PIO_PUSR 0x0068
-#define PIO_ASR 0x0070
-#define PIO_BSR 0x0074
-#define PIO_ABSR 0x0078
-#define PIO_OWER 0x00a0
-#define PIO_OWDR 0x00a4
-#define PIO_OWSR 0x00a8
-
-/* Hardware register access */
-#define pio_readl(base, reg) \
- __raw_readl((void *)base + PIO_##reg)
-#define pio_writel(base, reg, value) \
- __raw_writel((value), (void *)base + PIO_##reg)
-
-/* Portmux API starts here. See doc/README.AVR32-port-muxing */
-
-enum portmux_function {
- PORTMUX_FUNC_A,
- PORTMUX_FUNC_B,
-};
-
-/* Pull-down, buskeeper and drive strength are not supported */
-#define PORTMUX_DIR_INPUT (0 << 0)
-#define PORTMUX_DIR_OUTPUT (1 << 0)
-#define PORTMUX_INIT_LOW (0 << 1)
-#define PORTMUX_INIT_HIGH (1 << 1)
-#define PORTMUX_PULL_UP (1 << 2)
-#define PORTMUX_PULL_DOWN (0)
-#define PORTMUX_BUSKEEPER PORTMUX_PULL_UP
-#define PORTMUX_DRIVE_MIN (0)
-#define PORTMUX_DRIVE_LOW (0)
-#define PORTMUX_DRIVE_HIGH (0)
-#define PORTMUX_DRIVE_MAX (0)
-#define PORTMUX_OPEN_DRAIN (1 << 3)
-
-void portmux_select_peripheral(void *port, unsigned long pin_mask,
- enum portmux_function func, unsigned long flags);
-void portmux_select_gpio(void *port, unsigned long pin_mask,
- unsigned long flags);
-
-/* Internal helper functions */
-
-static inline void __pio_set_output_value(void *port, unsigned int pin,
- int value)
-{
- /*
- * value will usually be constant, but it's pretty cheap
- * either way.
- */
- if (value)
- pio_writel(port, SODR, 1 << pin);
- else
- pio_writel(port, CODR, 1 << pin);
-}
-
-static inline int __pio_get_input_value(void *port, unsigned int pin)
-{
- return (pio_readl(port, PDSR) >> pin) & 1;
-}
-
-void pio_set_output_value(unsigned int pin, int value);
-int pio_get_input_value(unsigned int pin);
-
-/* GPIO API starts here */
-
-/*
- * GCC doesn't realize that the constant case is extremely trivial,
- * so we need to help it make the right decision by using
- * always_inline.
- */
-__attribute__((always_inline))
-static inline void gpio_set_value(unsigned int pin, int value)
-{
- if (__builtin_constant_p(pin))
- __pio_set_output_value(pio_pin_to_port(pin), pin & 0x1f, value);
- else
- pio_set_output_value(pin, value);
-}
-
-__attribute__((always_inline))
-static inline int gpio_get_value(unsigned int pin)
-{
- if (__builtin_constant_p(pin))
- return __pio_get_input_value(pio_pin_to_port(pin), pin & 0x1f);
- else
- return pio_get_input_value(pin);
-}
-
-#endif /* __AVR32_PORTMUX_PIO_H__ */
diff --git a/arch/avr32/include/asm/bitops.h b/arch/avr32/include/asm/bitops.h
deleted file mode 100644
index 0d425c20f9..0000000000
--- a/arch/avr32/include/asm/bitops.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __ASM_AVR32_BITOPS_H
-#define __ASM_AVR32_BITOPS_H
-
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/__fls.h>
-#include <asm-generic/bitops/fls64.h>
-#include <asm-generic/bitops/__ffs.h>
-
-#endif /* __ASM_AVR32_BITOPS_H */
diff --git a/arch/avr32/include/asm/byteorder.h b/arch/avr32/include/asm/byteorder.h
deleted file mode 100644
index 25e9aff425..0000000000
--- a/arch/avr32/include/asm/byteorder.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __ASM_AVR32_BYTEORDER_H
-#define __ASM_AVR32_BYTEORDER_H
-
-#include <asm/types.h>
-
-#define __arch__swab32(x) __builtin_bswap_32(x)
-#define __arch__swab16(x) __builtin_bswap_16(x)
-
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-# define __BYTEORDER_HAS_U64__
-# define __SWAB_64_THRU_32__
-#endif
-
-#include <linux/byteorder/big_endian.h>
-
-#endif /* __ASM_AVR32_BYTEORDER_H */
diff --git a/arch/avr32/include/asm/cache.h b/arch/avr32/include/asm/cache.h
deleted file mode 100644
index 486284398e..0000000000
--- a/arch/avr32/include/asm/cache.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __AVR32_CACHE_H__
-#define __AVR32_CACHE_H__
-
-/*
- * Since the AVR32 architecture has a queryable cacheline size with a maximum
- * value of 256 we set the DMA buffer alignemnt requirement to this maximum
- * value. The board config can override this if it knows that the cacheline
- * size is a smaller value. AVR32 boards use the CONFIG_SYS_DCACHE_LINESZ
- * macro to specify cache line size, so if it is set we use it instead.
- */
-#ifdef CONFIG_SYS_CACHELINE_SIZE
-#define ARCH_DMA_MINALIGN CONFIG_SYS_CACHELINE_SIZE
-#elif defined(CONFIG_SYS_DCACHE_LINESZ)
-#define ARCH_DMA_MINALIGN CONFIG_SYS_DCACHE_LINESZ
-#else
-#define ARCH_DMA_MINALIGN 256
-#endif
-
-#endif /* __AVR32_CACHE_H__ */
diff --git a/arch/avr32/include/asm/config.h b/arch/avr32/include/asm/config.h
deleted file mode 100644
index 529fe227a6..0000000000
--- a/arch/avr32/include/asm/config.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _ASM_CONFIG_H_
-#define _ASM_CONFIG_H_
-
-#define CONFIG_NEEDS_MANUAL_RELOC
-#define CONFIG_SYS_GENERIC_GLOBAL_DATA
-
-#endif
diff --git a/arch/avr32/include/asm/dma-mapping.h b/arch/avr32/include/asm/dma-mapping.h
deleted file mode 100644
index 1cde8275f4..0000000000
--- a/arch/avr32/include/asm/dma-mapping.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __ASM_AVR32_DMA_MAPPING_H
-#define __ASM_AVR32_DMA_MAPPING_H
-
-#include <asm/io.h>
-#include <asm/arch/cacheflush.h>
-
-enum dma_data_direction {
- DMA_BIDIRECTIONAL = 0,
- DMA_TO_DEVICE = 1,
- DMA_FROM_DEVICE = 2,
-};
-
-static inline void *dma_alloc_coherent(size_t len, unsigned long *handle)
-{
- *handle = (unsigned long)memalign(ARCH_DMA_MINALIGN, len);
- return (void *)*handle;
-}
-
-static inline unsigned long dma_map_single(volatile void *vaddr, size_t len,
- enum dma_data_direction dir)
-{
- extern void __bad_dma_data_direction(void);
-
- switch (dir) {
- case DMA_BIDIRECTIONAL:
- flush_dcache_range((unsigned long)vaddr,
- (unsigned long)vaddr + len);
- break;
- case DMA_TO_DEVICE:
- dcache_clean_range(vaddr, len);
- break;
- case DMA_FROM_DEVICE:
- invalidate_dcache_range((unsigned long)vaddr,
- (unsigned long)vaddr + len);
- break;
- default:
- /* This will cause a linker error */
- __bad_dma_data_direction();
- }
-
- return virt_to_phys(vaddr);
-}
-
-static inline void dma_unmap_single(volatile void *vaddr, size_t len,
- unsigned long paddr)
-{
-
-}
-
-#endif /* __ASM_AVR32_DMA_MAPPING_H */
diff --git a/arch/avr32/include/asm/global_data.h b/arch/avr32/include/asm/global_data.h
deleted file mode 100644
index 60abd00782..0000000000
--- a/arch/avr32/include/asm/global_data.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __ASM_GLOBAL_DATA_H__
-#define __ASM_GLOBAL_DATA_H__
-
-/* Architecture-specific global data */
-struct arch_global_data {
- unsigned long cpu_hz; /* cpu core clock frequency */
-};
-
-#include <asm-generic/global_data.h>
-
-#define DECLARE_GLOBAL_DATA_PTR register gd_t *gd asm("r5")
-
-#endif /* __ASM_GLOBAL_DATA_H__ */
diff --git a/arch/avr32/include/asm/hmatrix-common.h b/arch/avr32/include/asm/hmatrix-common.h
deleted file mode 100644
index 66ea43a88b..0000000000
--- a/arch/avr32/include/asm/hmatrix-common.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Copyright (C) 2008 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __ASM_AVR32_HMATRIX_COMMON_H__
-#define __ASM_AVR32_HMATRIX_COMMON_H__
-
-/* HMATRIX register offsets */
-struct hmatrix_regs {
- u32 MCFG[16];
- u32 SCFG[16];
- struct {
- u32 A;
- u32 B;
- } PRS[16];
- u32 MRCR;
- u32 __reserved[3];
- u32 SFR[16];
-};
-
-/* Bitfields in MCFG */
-#define HMATRIX_ULBT_OFFSET 0
-#define HMATRIX_ULBT_SIZE 3
-
-/* Bitfields in SCFG */
-#define HMATRIX_SLOT_CYCLE_OFFSET 0
-#define HMATRIX_SLOT_CYCLE_SIZE 8
-#define HMATRIX_DEFMSTR_TYPE_OFFSET 16
-#define HMATRIX_DEFMSTR_TYPE_SIZE 2
-#define HMATRIX_FIXED_DEFMSTR_OFFSET 18
-#define HMATRIX_FIXED_DEFMSTR_SIZE 4
-#define HMATRIX_ARBT_OFFSET 24
-#define HMATRIX_ARBT_SIZE 1
-
-/* Bitfields in PRS.A */
-#define HMATRIX_M0PR_OFFSET 0
-#define HMATRIX_M0PR_SIZE 4
-#define HMATRIX_M1PR_OFFSET 4
-#define HMATRIX_M1PR_SIZE 4
-#define HMATRIX_M2PR_OFFSET 8
-#define HMATRIX_M2PR_SIZE 4
-#define HMATRIX_M3PR_OFFSET 12
-#define HMATRIX_M3PR_SIZE 4
-#define HMATRIX_M4PR_OFFSET 16
-#define HMATRIX_M4PR_SIZE 4
-#define HMATRIX_M5PR_OFFSET 20
-#define HMATRIX_M5PR_SIZE 4
-#define HMATRIX_M6PR_OFFSET 24
-#define HMATRIX_M6PR_SIZE 4
-#define HMATRIX_M7PR_OFFSET 28
-#define HMATRIX_M7PR_SIZE 4
-
-/* Bitfields in PRS.B */
-#define HMATRIX_M8PR_OFFSET 0
-#define HMATRIX_M8PR_SIZE 4
-#define HMATRIX_M9PR_OFFSET 4
-#define HMATRIX_M9PR_SIZE 4
-#define HMATRIX_M10PR_OFFSET 8
-#define HMATRIX_M10PR_SIZE 4
-#define HMATRIX_M11PR_OFFSET 12
-#define HMATRIX_M11PR_SIZE 4
-#define HMATRIX_M12PR_OFFSET 16
-#define HMATRIX_M12PR_SIZE 4
-#define HMATRIX_M13PR_OFFSET 20
-#define HMATRIX_M13PR_SIZE 4
-#define HMATRIX_M14PR_OFFSET 24
-#define HMATRIX_M14PR_SIZE 4
-#define HMATRIX_M15PR_OFFSET 28
-#define HMATRIX_M15PR_SIZE 4
-
-/* Constants for ULBT */
-#define HMATRIX_ULBT_INFINITE 0
-#define HMATRIX_ULBT_SINGLE 1
-#define HMATRIX_ULBT_FOUR_BEAT 2
-#define HMATRIX_ULBT_EIGHT_BEAT 3
-#define HMATRIX_ULBT_SIXTEEN_BEAT 4
-
-/* Constants for DEFMSTR_TYPE */
-#define HMATRIX_DEFMSTR_TYPE_NO_DEFAULT 0
-#define HMATRIX_DEFMSTR_TYPE_LAST_DEFAULT 1
-#define HMATRIX_DEFMSTR_TYPE_FIXED_DEFAULT 2
-
-/* Constants for ARBT */
-#define HMATRIX_ARBT_ROUND_ROBIN 0
-#define HMATRIX_ARBT_FIXED_PRIORITY 1
-
-/* Bit manipulation macros */
-#define HMATRIX_BIT(name) \
- (1 << HMATRIX_##name##_OFFSET)
-#define HMATRIX_BF(name,value) \
- (((value) & ((1 << HMATRIX_##name##_SIZE) - 1)) \
- << HMATRIX_##name##_OFFSET)
-#define HMATRIX_BFEXT(name,value) \
- (((value) >> HMATRIX_##name##_OFFSET) \
- & ((1 << HMATRIX_##name##_SIZE) - 1))
-#define HMATRIX_BFINS(name,value,old) \
- (((old) & ~(((1 << HMATRIX_##name##_SIZE) - 1) \
- << HMATRIX_##name##_OFFSET)) \
- | HMATRIX_BF(name,value))
-
-/* Register access macros */
-#define __hmatrix_reg(reg) \
- (((volatile struct hmatrix_regs *)ATMEL_BASE_HMATRIX)->reg)
-#define hmatrix_read(reg) \
- (__hmatrix_reg(reg))
-#define hmatrix_write(reg, value) \
- do { __hmatrix_reg(reg) = (value); } while (0)
-
-#define hmatrix_slave_read(slave, reg) \
- hmatrix_read(reg[HMATRIX_SLAVE_##slave])
-#define hmatrix_slave_write(slave, reg, value) \
- hmatrix_write(reg[HMATRIX_SLAVE_##slave], value)
-
-#endif /* __ASM_AVR32_HMATRIX_COMMON_H__ */
diff --git a/arch/avr32/include/asm/io.h b/arch/avr32/include/asm/io.h
deleted file mode 100644
index c8d6933613..0000000000
--- a/arch/avr32/include/asm/io.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __ASM_AVR32_IO_H
-#define __ASM_AVR32_IO_H
-
-#include <asm/types.h>
-
-#ifdef __KERNEL__
-
-/*
- * Generic IO read/write. These perform native-endian accesses. Note
- * that some architectures will want to re-define __raw_{read,write}w.
- */
-extern void __raw_writesb(unsigned int addr, const void *data, int bytelen);
-extern void __raw_writesw(unsigned int addr, const void *data, int wordlen);
-extern void __raw_writesl(unsigned int addr, const void *data, int longlen);
-
-extern void __raw_readsb(unsigned int addr, void *data, int bytelen);
-extern void __raw_readsw(unsigned int addr, void *data, int wordlen);
-extern void __raw_readsl(unsigned int addr, void *data, int longlen);
-
-#define __raw_writeb(v,a) (*(volatile unsigned char *)(a) = (v))
-#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v))
-#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v))
-
-#define __raw_readb(a) (*(volatile unsigned char *)(a))
-#define __raw_readw(a) (*(volatile unsigned short *)(a))
-#define __raw_readl(a) (*(volatile unsigned int *)(a))
-
-/* As long as I/O is only performed in P4 (or possibly P3), we're safe */
-#define writeb(v,a) __raw_writeb(v,a)
-#define writew(v,a) __raw_writew(v,a)
-#define writel(v,a) __raw_writel(v,a)
-
-#define readb(a) __raw_readb(a)
-#define readw(a) __raw_readw(a)
-#define readl(a) __raw_readl(a)
-
-/*
- * Bad read/write accesses...
- */
-extern void __readwrite_bug(const char *fn);
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * All I/O is memory mapped, so these macros doesn't make very much sense
- */
-#define outb(v,p) __raw_writeb(v, p)
-#define outw(v,p) __raw_writew(cpu_to_le16(v),p)
-#define outl(v,p) __raw_writel(cpu_to_le32(v),p)
-
-#define inb(p) ({ unsigned int __v = __raw_readb(p); __v; })
-#define inw(p) ({ unsigned int __v = __le16_to_cpu(__raw_readw(p)); __v; })
-#define inl(p) ({ unsigned int __v = __le32_to_cpu(__raw_readl(p)); __v; })
-
-#include <asm/arch/addrspace.h>
-/* Provides virt_to_phys, phys_to_virt, cached, uncached, map_physmem */
-
-#endif /* __KERNEL__ */
-
-static inline void sync(void)
-{
-}
-
-/*
- * Take down a mapping set up by map_physmem().
- */
-static inline void unmap_physmem(void *vaddr, unsigned long len)
-{
-
-}
-
-#endif /* __ASM_AVR32_IO_H */
diff --git a/arch/avr32/include/asm/linkage.h b/arch/avr32/include/asm/linkage.h
deleted file mode 100644
index e69de29bb2..0000000000
diff --git a/arch/avr32/include/asm/posix_types.h b/arch/avr32/include/asm/posix_types.h
deleted file mode 100644
index c65f4ecb6b..0000000000
--- a/arch/avr32/include/asm/posix_types.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __ASM_AVR32_POSIX_TYPES_H
-#define __ASM_AVR32_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc. Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned long __kernel_dev_t;
-typedef unsigned long __kernel_ino_t;
-typedef unsigned short __kernel_mode_t;
-typedef unsigned short __kernel_nlink_t;
-typedef long __kernel_off_t;
-typedef int __kernel_pid_t;
-typedef unsigned short __kernel_ipc_pid_t;
-typedef unsigned int __kernel_uid_t;
-typedef unsigned int __kernel_gid_t;
-typedef unsigned long __kernel_size_t;
-typedef int __kernel_ssize_t;
-typedef int __kernel_ptrdiff_t;
-typedef long __kernel_time_t;
-typedef long __kernel_suseconds_t;
-typedef long __kernel_clock_t;
-typedef int __kernel_timer_t;
-typedef int __kernel_clockid_t;
-typedef int __kernel_daddr_t;
-typedef char * __kernel_caddr_t;
-typedef unsigned short __kernel_uid16_t;
-typedef unsigned short __kernel_gid16_t;
-typedef unsigned int __kernel_uid32_t;
-typedef unsigned int __kernel_gid32_t;
-
-typedef unsigned short __kernel_old_uid_t;
-typedef unsigned short __kernel_old_gid_t;
-typedef unsigned short __kernel_old_dev_t;
-
-#ifdef __GNUC__
-typedef long long __kernel_loff_t;
-#endif
-
-typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
- int val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
- int __val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__)
-
-#undef __FD_SET
-static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
-{
- unsigned long __tmp = __fd / __NFDBITS;
- unsigned long __rem = __fd % __NFDBITS;
- __fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
-}
-
-#undef __FD_CLR
-static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
-{
- unsigned long __tmp = __fd / __NFDBITS;
- unsigned long __rem = __fd % __NFDBITS;
- __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
-}
-
-
-#undef __FD_ISSET
-static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
-{
- unsigned long __tmp = __fd / __NFDBITS;
- unsigned long __rem = __fd % __NFDBITS;
- return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
-}
-
-/*
- * This will unroll the loop for the normal constant case (8 ints,
- * for a 256-bit fd_set)
- */
-#undef __FD_ZERO
-static __inline__ void __FD_ZERO(__kernel_fd_set *__p)
-{
- unsigned long *__tmp = __p->fds_bits;
- int __i;
-
- if (__builtin_constant_p(__FDSET_LONGS)) {
- switch (__FDSET_LONGS) {
- case 16:
- __tmp[ 0] = 0; __tmp[ 1] = 0;
- __tmp[ 2] = 0; __tmp[ 3] = 0;
- __tmp[ 4] = 0; __tmp[ 5] = 0;
- __tmp[ 6] = 0; __tmp[ 7] = 0;
- __tmp[ 8] = 0; __tmp[ 9] = 0;
- __tmp[10] = 0; __tmp[11] = 0;
- __tmp[12] = 0; __tmp[13] = 0;
- __tmp[14] = 0; __tmp[15] = 0;
- return;
-
- case 8:
- __tmp[ 0] = 0; __tmp[ 1] = 0;
- __tmp[ 2] = 0; __tmp[ 3] = 0;
- __tmp[ 4] = 0; __tmp[ 5] = 0;
- __tmp[ 6] = 0; __tmp[ 7] = 0;
- return;
-
- case 4:
- __tmp[ 0] = 0; __tmp[ 1] = 0;
- __tmp[ 2] = 0; __tmp[ 3] = 0;
- return;
- }
- }
- __i = __FDSET_LONGS;
- while (__i) {
- __i--;
- *__tmp = 0;
- __tmp++;
- }
-}
-
-#endif /* defined(__KERNEL__) */
-
-#endif /* __ASM_AVR32_POSIX_TYPES_H */
diff --git a/arch/avr32/include/asm/processor.h b/arch/avr32/include/asm/processor.h
deleted file mode 100644
index 74d868cdc8..0000000000
--- a/arch/avr32/include/asm/processor.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __ASM_AVR32_PROCESSOR_H
-#define __ASM_AVR32_PROCESSOR_H
-
-#ifndef __ASSEMBLY__
-
-#define current_text_addr() ({ void *pc; __asm__("mov %0,pc" : "=r"(pc)); pc; })
-
-struct avr32_cpuinfo {
- unsigned long loops_per_jiffy;
-};
-
-extern struct avr32_cpuinfo boot_cpu_data;
-
-#ifdef CONFIG_SMP
-extern struct avr32_cpuinfo cpu_data[];
-#define current_cpu_data cpu_data[smp_processor_id()]
-#else
-#define cpu_data (&boot_cpu_data)
-#define current_cpu_data boot_cpu_data
-#endif
-
-/* TODO: Make configurable (2GB will serve as a reasonable default) */
-#define TASK_SIZE 0x80000000
-
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's
- */
-#define TASK_UNMAPPED_BASE (TASK_SIZE / 3)
-
-#define cpu_relax() barrier()
-#define cpu_sync_pipeline() asm volatile("sub pc, -2" : : : "memory")
-
-/* This struct contains the CPU context as stored by switch_to() */
-struct thread_struct {
- unsigned long pc;
- unsigned long ksp; /* Kernel stack pointer */
- unsigned long r7;
- unsigned long r6;
- unsigned long r5;
- unsigned long r4;
- unsigned long r3;
- unsigned long r2;
- unsigned long r1;
- unsigned long r0;
-};
-
-#define INIT_THREAD { \
- .ksp = sizeof(init_stack) + (long)&init_stack, \
-}
-
-/*
- * Do necessary setup to start up a newly executed thread.
- */
-#define start_thread(regs, new_pc, new_sp) \
- set_fs(USER_DS); \
- regs->sr = 0; /* User mode. */ \
- regs->gr[REG_PC] = new_pc; \
- regs->gr[REG_SP] = new_sp
-
-struct task_struct;
-
-/* Free all resources held by a thread */
-extern void release_thread(struct task_struct *);
-
-/* Create a kernel thread without removing it from tasklists */
-extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk) do { } while(0)
-
-/* Return saved PC of a blocked thread */
-#define thread_saved_pc(tsk) (tsk->thread.pc)
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_AVR32_PROCESSOR_H */
diff --git a/arch/avr32/include/asm/ptrace.h b/arch/avr32/include/asm/ptrace.h
deleted file mode 100644
index a32969b5a4..0000000000
--- a/arch/avr32/include/asm/ptrace.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __ASM_AVR32_PTRACE_H
-#define __ASM_AVR32_PTRACE_H
-
-/*
- * Status Register bits
- */
-#define SR_H 0x40000000
-#define SR_R 0x20000000
-#define SR_J 0x10000000
-#define SR_DM 0x08000000
-#define SR_D 0x04000000
-#define MODE_NMI 0x01c00000
-#define MODE_EXCEPTION 0x01800000
-#define MODE_INT3 0x01400000
-#define MODE_INT2 0x01000000
-#define MODE_INT1 0x00c00000
-#define MODE_INT0 0x00800000
-#define MODE_SUPERVISOR 0x00400000
-#define MODE_USER 0x00000000
-#define MODE_MASK 0x01c00000
-#define SR_EM 0x00200000
-#define SR_I3M 0x00100000
-#define SR_I2M 0x00080000
-#define SR_I1M 0x00040000
-#define SR_I0M 0x00020000
-#define SR_GM 0x00010000
-
-#define MODE_SHIFT 22
-#define SR_EM_BIT 21
-#define SR_I3M_BIT 20
-#define SR_I2M_BIT 19
-#define SR_I1M_BIT 18
-#define SR_I0M_BIT 17
-#define SR_GM_BIT 16
-
-/* The user-visible part */
-#define SR_Q 0x00000010
-#define SR_V 0x00000008
-#define SR_N 0x00000004
-#define SR_Z 0x00000002
-#define SR_C 0x00000001
-
-/*
- * The order is defined by the stdsp instruction. r0 is stored first, so it
- * gets the highest address.
- *
- * Registers 0-12 are general-purpose registers (r12 is normally used for
- * the function return value).
- * Register 13 is the stack pointer
- * Register 14 is the link register
- * Register 15 is the program counter
- */
-#define FRAME_SIZE_FULL 72
-#define REG_R12_ORIG 68
-#define REG_R0 64
-#define REG_R1 60
-#define REG_R2 56
-#define REG_R3 52
-#define REG_R4 48
-#define REG_R5 44
-#define REG_R6 40
-#define REG_R7 36
-#define REG_R8 32
-#define REG_R9 28
-#define REG_R10 34
-#define REG_R11 20
-#define REG_R12 16
-#define REG_SP 12
-#define REG_LR 8
-
-#define FRAME_SIZE_MIN 8
-#define REG_PC 4
-#define REG_SR 0
-
-#ifndef __ASSEMBLY__
-struct pt_regs {
- /* These are always saved */
- unsigned long sr;
- unsigned long pc;
-
- /* These are sometimes saved */
- unsigned long lr;
- unsigned long sp;
- unsigned long r12;
- unsigned long r11;
- unsigned long r10;
- unsigned long r9;
- unsigned long r8;
- unsigned long r7;
- unsigned long r6;
- unsigned long r5;
- unsigned long r4;
- unsigned long r3;
- unsigned long r2;
- unsigned long r1;
- unsigned long r0;
-
- /* Only saved on system call */
- unsigned long r12_orig;
-};
-
-#ifdef __KERNEL__
-# define user_mode(regs) (((regs)->sr & MODE_MASK) == MODE_USER)
-# define instruction_pointer(regs) ((regs)->pc)
-extern void show_regs (struct pt_regs *);
-
-static __inline__ int valid_user_regs(struct pt_regs *regs)
-{
- /*
- * Some of the Java bits might be acceptable if/when we
- * implement some support for that stuff...
- */
- if ((regs->sr & 0xffff0000) == 0)
- return 1;
-
- /*
- * Force status register flags to be sane and report this
- * illegal behaviour...
- */
- regs->sr &= 0x0000ffff;
- return 0;
-}
-#endif
-
-#endif /* ! __ASSEMBLY__ */
-
-#endif /* __ASM_AVR32_PTRACE_H */
diff --git a/arch/avr32/include/asm/sdram.h b/arch/avr32/include/asm/sdram.h
deleted file mode 100644
index 83d515bda2..0000000000
--- a/arch/avr32/include/asm/sdram.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __ASM_AVR32_SDRAM_H
-#define __ASM_AVR32_SDRAM_H
-
-struct sdram_config {
- /* Number of data bits. */
- enum {
- SDRAM_DATA_16BIT = 16,
- SDRAM_DATA_32BIT = 32,
- } data_bits;
-
- /* Number of address bits */
- uint8_t row_bits, col_bits, bank_bits;
-
- /* SDRAM timings in cycles */
- uint8_t cas, twr, trc, trp, trcd, tras, txsr;
-
- /* SDRAM refresh period in cycles */
- unsigned long refresh_period;
-};
-
-/*
- * Attempt to initialize the SDRAM controller using the specified
- * parameters. Return the expected size of the memory area based on
- * the number of address and data bits.
- *
- * The caller should verify that the configuration is correct by
- * running a memory test, e.g. get_ram_size().
- */
-extern unsigned long sdram_init(void *sdram_base,
- const struct sdram_config *config);
-
-#endif /* __ASM_AVR32_SDRAM_H */
diff --git a/arch/avr32/include/asm/sections.h b/arch/avr32/include/asm/sections.h
deleted file mode 100644
index 6b7804fe02..0000000000
--- a/arch/avr32/include/asm/sections.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __ASM_AVR32_SECTIONS_H
-#define __ASM_AVR32_SECTIONS_H
-
-#include <asm-generic/sections.h>
-
-/* References to section boundaries */
-
-extern char __data_lma[], __edata_lma[];
-extern char __got_start[], __got_lma[], __got_end[];
-
-#endif /* __ASM_AVR32_SECTIONS_H */
diff --git a/arch/avr32/include/asm/setup.h b/arch/avr32/include/asm/setup.h
deleted file mode 100644
index e05e65ebc5..0000000000
--- a/arch/avr32/include/asm/setup.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * Based on linux/include/asm-arm/setup.h
- * Copyright (C) 1997-1999 Russel King
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __ASM_AVR32_SETUP_H__
-#define __ASM_AVR32_SETUP_H__
-
-#define COMMAND_LINE_SIZE 256
-
-/* Magic number indicating that a tag table is present */
-#define ATAG_MAGIC 0xa2a25441
-
-#ifndef __ASSEMBLY__
-
-/*
- * Generic memory range, used by several tags.
- *
- * addr is always physical.
- * size is measured in bytes.
- * next is for use by the OS, e.g. for grouping regions into
- * linked lists.
- */
-struct tag_mem_range {
- u32 addr;
- u32 size;
- struct tag_mem_range * next;
-};
-
-/* The list ends with an ATAG_NONE node. */
-#define ATAG_NONE 0x00000000
-
-struct tag_header {
- u32 size;
- u32 tag;
-};
-
-/* The list must start with an ATAG_CORE node */
-#define ATAG_CORE 0x54410001
-
-struct tag_core {
- u32 flags;
- u32 pagesize;
- u32 rootdev;
-};
-
-/* it is allowed to have multiple ATAG_MEM nodes */
-#define ATAG_MEM 0x54410002
-/* ATAG_MEM uses tag_mem_range */
-
-/* command line: \0 terminated string */
-#define ATAG_CMDLINE 0x54410003
-
-struct tag_cmdline {
- char cmdline[1]; /* this is the minimum size */
-};
-
-/* Ramdisk image (may be compressed) */
-#define ATAG_RDIMG 0x54410004
-/* ATAG_RDIMG uses tag_mem_range */
-
-/* Information about various clocks present in the system */
-#define ATAG_CLOCK 0x54410005
-
-struct tag_clock {
- u32 clock_id; /* Which clock are we talking about? */
- u32 clock_flags; /* Special features */
- u64 clock_hz; /* Clock speed in Hz */
-};
-
-/* The clock types we know about */
-#define ACLOCK_BOOTCPU 0 /* The CPU we're booting from */
-#define ACLOCK_HSB 1 /* Deprecated */
-
-/* Memory reserved for the system (e.g. the bootloader) */
-#define ATAG_RSVD_MEM 0x54410006
-/* ATAG_RSVD_MEM uses tag_mem_range */
-
-/* Ethernet information */
-
-#define ATAG_ETHERNET 0x54410007
-
-struct tag_ethernet {
- u8 mac_index;
- u8 mii_phy_addr;
- u8 hw_address[6];
-};
-
-#define AETH_INVALID_PHY 0xff
-
-/* board information information */
-#define ATAG_BOARDINFO 0x54410008
-
-struct tag_boardinfo {
- u32 board_number;
-};
-
-struct tag {
- struct tag_header hdr;
- union {
- struct tag_core core;
- struct tag_mem_range mem_range;
- struct tag_cmdline cmdline;
- struct tag_clock clock;
- struct tag_ethernet ethernet;
- struct tag_boardinfo boardinfo;
- } u;
-};
-
-struct tagtable {
- u32 tag;
- int (*parse)(struct tag *);
-};
-
-#define __tag __attribute_used__ __attribute__((__section__(".taglist")))
-#define __tagtable(tag, fn) \
- static struct tagtable __tagtable_##fn __tag = { tag, fn }
-
-#define tag_member_present(tag,member) \
- ((unsigned long)(&((struct tag *)0L)->member + 1) \
- <= (tag)->hdr.size * 4)
-
-#define tag_next(t) ((struct tag *)((u32 *)(t) + (t)->hdr.size))
-#define tag_size(type) ((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
-
-#define for_each_tag(t,base) \
- for (t = base; t->hdr.size; t = tag_next(t))
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __ASM_AVR32_SETUP_H__ */
diff --git a/arch/avr32/include/asm/string.h b/arch/avr32/include/asm/string.h
deleted file mode 100644
index dba0219fb3..0000000000
--- a/arch/avr32/include/asm/string.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __ASM_AVR32_STRING_H
-#define __ASM_AVR32_STRING_H
-
-#define __HAVE_ARCH_MEMSET
-extern void *memset(void *s, int c, __kernel_size_t n);
-
-#endif /* __ASM_AVR32_STRING_H */
diff --git a/arch/avr32/include/asm/sysreg.h b/arch/avr32/include/asm/sysreg.h
deleted file mode 100644
index 4f6970448b..0000000000
--- a/arch/avr32/include/asm/sysreg.h
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * System registers for AVR32
- */
-#ifndef __ASM_AVR32_SYSREG_H__
-#define __ASM_AVR32_SYSREG_H__
-
-/* system register offsets */
-#define SYSREG_SR 0x0000
-#define SYSREG_EVBA 0x0004
-#define SYSREG_ACBA 0x0008
-#define SYSREG_CPUCR 0x000c
-#define SYSREG_ECR 0x0010
-#define SYSREG_RSR_SUP 0x0014
-#define SYSREG_RSR_INT0 0x0018
-#define SYSREG_RSR_INT1 0x001c
-#define SYSREG_RSR_INT2 0x0020
-#define SYSREG_RSR_INT3 0x0024
-#define SYSREG_RSR_EX 0x0028
-#define SYSREG_RSR_NMI 0x002c
-#define SYSREG_RSR_DBG 0x0030
-#define SYSREG_RAR_SUP 0x0034
-#define SYSREG_RAR_INT0 0x0038
-#define SYSREG_RAR_INT1 0x003c
-#define SYSREG_RAR_INT2 0x0040
-#define SYSREG_RAR_INT3 0x0044
-#define SYSREG_RAR_EX 0x0048
-#define SYSREG_RAR_NMI 0x004c
-#define SYSREG_RAR_DBG 0x0050
-#define SYSREG_JECR 0x0054
-#define SYSREG_JOSP 0x0058
-#define SYSREG_JAVA_LV0 0x005c
-#define SYSREG_JAVA_LV1 0x0060
-#define SYSREG_JAVA_LV2 0x0064
-#define SYSREG_JAVA_LV3 0x0068
-#define SYSREG_JAVA_LV4 0x006c
-#define SYSREG_JAVA_LV5 0x0070
-#define SYSREG_JAVA_LV6 0x0074
-#define SYSREG_JAVA_LV7 0x0078
-#define SYSREG_JTBA 0x007c
-#define SYSREG_JBCR 0x0080
-#define SYSREG_CONFIG0 0x0100
-#define SYSREG_CONFIG1 0x0104
-#define SYSREG_COUNT 0x0108
-#define SYSREG_COMPARE 0x010c
-#define SYSREG_TLBEHI 0x0110
-#define SYSREG_TLBELO 0x0114
-#define SYSREG_PTBR 0x0118
-#define SYSREG_TLBEAR 0x011c
-#define SYSREG_MMUCR 0x0120
-#define SYSREG_TLBARLO 0x0124
-#define SYSREG_TLBARHI 0x0128
-#define SYSREG_PCCNT 0x012c
-#define SYSREG_PCNT0 0x0130
-#define SYSREG_PCNT1 0x0134
-#define SYSREG_PCCR 0x0138
-#define SYSREG_BEAR 0x013c
-#define SYSREG_SABAL 0x0300
-#define SYSREG_SABAH 0x0304
-#define SYSREG_SABD 0x0308
-
-/* Bitfields in SR */
-#define SYSREG_SR_C_OFFSET 0
-#define SYSREG_SR_C_SIZE 1
-#define SYSREG_Z_OFFSET 1
-#define SYSREG_Z_SIZE 1
-#define SYSREG_SR_N_OFFSET 2
-#define SYSREG_SR_N_SIZE 1
-#define SYSREG_SR_V_OFFSET 3
-#define SYSREG_SR_V_SIZE 1
-#define SYSREG_Q_OFFSET 4
-#define SYSREG_Q_SIZE 1
-#define SYSREG_L_OFFSET 5
-#define SYSREG_L_SIZE 1
-#define SYSREG_T_OFFSET 14
-#define SYSREG_T_SIZE 1
-#define SYSREG_SR_R_OFFSET 15
-#define SYSREG_SR_R_SIZE 1
-#define SYSREG_GM_OFFSET 16
-#define SYSREG_GM_SIZE 1
-#define SYSREG_I0M_OFFSET 17
-#define SYSREG_I0M_SIZE 1
-#define SYSREG_I1M_OFFSET 18
-#define SYSREG_I1M_SIZE 1
-#define SYSREG_I2M_OFFSET 19
-#define SYSREG_I2M_SIZE 1
-#define SYSREG_I3M_OFFSET 20
-#define SYSREG_I3M_SIZE 1
-#define SYSREG_EM_OFFSET 21
-#define SYSREG_EM_SIZE 1
-#define SYSREG_M0_OFFSET 22
-#define SYSREG_M0_SIZE 1
-#define SYSREG_M1_OFFSET 23
-#define SYSREG_M1_SIZE 1
-#define SYSREG_M2_OFFSET 24
-#define SYSREG_M2_SIZE 1
-#define SYSREG_SR_D_OFFSET 26
-#define SYSREG_SR_D_SIZE 1
-#define SYSREG_DM_OFFSET 27
-#define SYSREG_DM_SIZE 1
-#define SYSREG_SR_J_OFFSET 28
-#define SYSREG_SR_J_SIZE 1
-#define SYSREG_H_OFFSET 29
-#define SYSREG_H_SIZE 1
-
-/* Bitfields in CPUCR */
-#define SYSREG_BI_OFFSET 0
-#define SYSREG_BI_SIZE 1
-#define SYSREG_BE_OFFSET 1
-#define SYSREG_BE_SIZE 1
-#define SYSREG_FE_OFFSET 2
-#define SYSREG_FE_SIZE 1
-#define SYSREG_RE_OFFSET 3
-#define SYSREG_RE_SIZE 1
-#define SYSREG_IBE_OFFSET 4
-#define SYSREG_IBE_SIZE 1
-#define SYSREG_IEE_OFFSET 5
-#define SYSREG_IEE_SIZE 1
-
-/* Bitfields in ECR */
-#define SYSREG_ECR_OFFSET 0
-#define SYSREG_ECR_SIZE 32
-
-/* Bitfields in CONFIG0 */
-#define SYSREG_CONFIG0_R_OFFSET 0
-#define SYSREG_CONFIG0_R_SIZE 1
-#define SYSREG_CONFIG0_D_OFFSET 1
-#define SYSREG_CONFIG0_D_SIZE 1
-#define SYSREG_CONFIG0_S_OFFSET 2
-#define SYSREG_CONFIG0_S_SIZE 1
-#define SYSREG_O_OFFSET 3
-#define SYSREG_O_SIZE 1
-#define SYSREG_P_OFFSET 4
-#define SYSREG_P_SIZE 1
-#define SYSREG_CONFIG0_J_OFFSET 5
-#define SYSREG_CONFIG0_J_SIZE 1
-#define SYSREG_F_OFFSET 6
-#define SYSREG_F_SIZE 1
-#define SYSREG_MMUT_OFFSET 7
-#define SYSREG_MMUT_SIZE 3
-#define SYSREG_AR_OFFSET 10
-#define SYSREG_AR_SIZE 3
-#define SYSREG_AT_OFFSET 13
-#define SYSREG_AT_SIZE 3
-#define SYSREG_PROCESSORREVISION_OFFSET 16
-#define SYSREG_PROCESSORREVISION_SIZE 8
-#define SYSREG_PROCESSORID_OFFSET 24
-#define SYSREG_PROCESSORID_SIZE 8
-
-/* Bitfields in CONFIG1 */
-#define SYSREG_DASS_OFFSET 0
-#define SYSREG_DASS_SIZE 3
-#define SYSREG_DLSZ_OFFSET 3
-#define SYSREG_DLSZ_SIZE 3
-#define SYSREG_DSET_OFFSET 6
-#define SYSREG_DSET_SIZE 4
-#define SYSREG_IASS_OFFSET 10
-#define SYSREG_IASS_SIZE 3
-#define SYSREG_ILSZ_OFFSET 13
-#define SYSREG_ILSZ_SIZE 3
-#define SYSREG_ISET_OFFSET 16
-#define SYSREG_ISET_SIZE 4
-#define SYSREG_DMMUSZ_OFFSET 20
-#define SYSREG_DMMUSZ_SIZE 6
-#define SYSREG_IMMUSZ_OFFSET 26
-#define SYSREG_IMMUSZ_SIZE 6
-
-/* Bitfields in TLBEHI */
-#define SYSREG_ASID_OFFSET 0
-#define SYSREG_ASID_SIZE 8
-#define SYSREG_TLBEHI_I_OFFSET 8
-#define SYSREG_TLBEHI_I_SIZE 1
-#define SYSREG_TLBEHI_V_OFFSET 9
-#define SYSREG_TLBEHI_V_SIZE 1
-#define SYSREG_VPN_OFFSET 10
-#define SYSREG_VPN_SIZE 22
-
-/* Bitfields in TLBELO */
-#define SYSREG_W_OFFSET 0
-#define SYSREG_W_SIZE 1
-#define SYSREG_TLBELO_D_OFFSET 1
-#define SYSREG_TLBELO_D_SIZE 1
-#define SYSREG_SZ_OFFSET 2
-#define SYSREG_SZ_SIZE 2
-#define SYSREG_AP_OFFSET 4
-#define SYSREG_AP_SIZE 3
-#define SYSREG_B_OFFSET 7
-#define SYSREG_B_SIZE 1
-#define SYSREG_G_OFFSET 8
-#define SYSREG_G_SIZE 1
-#define SYSREG_TLBELO_C_OFFSET 9
-#define SYSREG_TLBELO_C_SIZE 1
-#define SYSREG_PFN_OFFSET 10
-#define SYSREG_PFN_SIZE 22
-
-/* Bitfields in MMUCR */
-#define SYSREG_E_OFFSET 0
-#define SYSREG_E_SIZE 1
-#define SYSREG_M_OFFSET 1
-#define SYSREG_M_SIZE 1
-#define SYSREG_MMUCR_I_OFFSET 2
-#define SYSREG_MMUCR_I_SIZE 1
-#define SYSREG_MMUCR_N_OFFSET 3
-#define SYSREG_MMUCR_N_SIZE 1
-#define SYSREG_MMUCR_S_OFFSET 4
-#define SYSREG_MMUCR_S_SIZE 1
-#define SYSREG_DLA_OFFSET 8
-#define SYSREG_DLA_SIZE 6
-#define SYSREG_DRP_OFFSET 14
-#define SYSREG_DRP_SIZE 6
-#define SYSREG_ILA_OFFSET 20
-#define SYSREG_ILA_SIZE 6
-#define SYSREG_IRP_OFFSET 26
-#define SYSREG_IRP_SIZE 6
-
-/* Bitfields in PCCR */
-#define SYSREG_PCCR_R_OFFSET 1
-#define SYSREG_PCCR_R_SIZE 1
-#define SYSREG_PCCR_C_OFFSET 2
-#define SYSREG_PCCR_C_SIZE 1
-#define SYSREG_PCCR_S_OFFSET 3
-#define SYSREG_PCCR_S_SIZE 1
-#define SYSREG_IEC_OFFSET 4
-#define SYSREG_IEC_SIZE 1
-#define SYSREG_IE0_OFFSET 5
-#define SYSREG_IE0_SIZE 1
-#define SYSREG_IE1_OFFSET 6
-#define SYSREG_IE1_SIZE 1
-#define SYSREG_FC_OFFSET 8
-#define SYSREG_FC_SIZE 1
-#define SYSREG_F0_OFFSET 9
-#define SYSREG_F0_SIZE 1
-#define SYSREG_F1_OFFSET 10
-#define SYSREG_F1_SIZE 1
-#define SYSREG_CONF0_OFFSET 12
-#define SYSREG_CONF0_SIZE 6
-#define SYSREG_CONF1_OFFSET 18
-#define SYSREG_CONF1_SIZE 6
-
-/* Constants for ECR */
-#define ECR_UNRECOVERABLE 0
-#define ECR_TLB_MULTIPLE 1
-#define ECR_BUS_ERROR_WRITE 2
-#define ECR_BUS_ERROR_READ 3
-#define ECR_NMI 4
-#define ECR_ADDR_ALIGN_X 5
-#define ECR_PROTECTION_X 6
-#define ECR_DEBUG 7
-#define ECR_ILLEGAL_OPCODE 8
-#define ECR_UNIMPL_INSTRUCTION 9
-#define ECR_PRIVILEGE_VIOLATION 10
-#define ECR_FPE 11
-#define ECR_COPROC_ABSENT 12
-#define ECR_ADDR_ALIGN_R 13
-#define ECR_ADDR_ALIGN_W 14
-#define ECR_PROTECTION_R 15
-#define ECR_PROTECTION_W 16
-#define ECR_DTLB_MODIFIED 17
-#define ECR_TLB_MISS_X 20
-#define ECR_TLB_MISS_R 24
-#define ECR_TLB_MISS_W 28
-
-/* Bit manipulation macros */
-#define SYSREG_BIT(name) (1 << SYSREG_##name##_OFFSET)
-#define SYSREG_BF(name,value) \
- (((value) & ((1 << SYSREG_##name##_SIZE) - 1)) \
- << SYSREG_##name##_OFFSET)
-#define SYSREG_BFEXT(name,value) \
- (((value) >> SYSREG_##name##_OFFSET) \
- & ((1 << SYSREG_##name##_SIZE) - 1))
-#define SYSREG_BFINS(name,value,old) \
- (((old) & ~(((1 << SYSREG_##name##_SIZE) - 1) \
- << SYSREG_##name##_OFFSET)) \
- | SYSREG_BF(name,value))
-
-/* Register access macros */
-#define sysreg_read(reg) \
- ((unsigned long)__builtin_mfsr(SYSREG_##reg))
-#define sysreg_write(reg, value) \
- __builtin_mtsr(SYSREG_##reg, value)
-
-#endif /* __ASM_AVR32_SYSREG_H__ */
diff --git a/arch/avr32/include/asm/types.h b/arch/avr32/include/asm/types.h
deleted file mode 100644
index 65de677ece..0000000000
--- a/arch/avr32/include/asm/types.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __ASM_AVR32_TYPES_H
-#define __ASM_AVR32_TYPES_H
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __KERNEL__
-
-#define BITS_PER_LONG 32
-
-#ifndef __ASSEMBLY__
-
-typedef __signed__ char s8;
-typedef unsigned char u8;
-
-typedef __signed__ short s16;
-typedef unsigned short u16;
-
-typedef __signed__ int s32;
-typedef unsigned int u32;
-
-typedef __signed__ long long s64;
-typedef unsigned long long u64;
-
-/* Dma addresses are 32-bits wide. */
-
-typedef u32 dma_addr_t;
-
-typedef unsigned long phys_addr_t;
-typedef unsigned long phys_size_t;
-
-#ifdef CONFIG_LBD
-typedef u64 sector_t;
-#define HAVE_SECTOR_T
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-
-#endif /* __ASM_AVR32_TYPES_H */
diff --git a/arch/avr32/include/asm/u-boot.h b/arch/avr32/include/asm/u-boot.h
deleted file mode 100644
index 7d48e9a46b..0000000000
--- a/arch/avr32/include/asm/u-boot.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __ASM_U_BOOT_H__
-#define __ASM_U_BOOT_H__ 1
-
-/* Use the generic board which requires a unified bd_info */
-#include <asm-generic/u-boot.h>
-
-/* For image.h:image_check_target_arch() */
-#define IH_ARCH_DEFAULT IH_ARCH_AVR32
-
-int arch_cpu_init(void);
-int dram_init(void);
-
-#endif /* __ASM_U_BOOT_H__ */
diff --git a/arch/avr32/include/asm/unaligned.h b/arch/avr32/include/asm/unaligned.h
deleted file mode 100644
index 6cecbbb211..0000000000
--- a/arch/avr32/include/asm/unaligned.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/unaligned.h>
diff --git a/arch/avr32/lib/Makefile b/arch/avr32/lib/Makefile
deleted file mode 100644
index 8108ae5272..0000000000
--- a/arch/avr32/lib/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# (C) Copyright 2002-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# (C) Copyright 2004-2006 Atmel Corporation
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y += memset.o
-obj-$(CONFIG_CMD_BOOTM) += bootm.o
-obj-y += interrupts.o
-obj-y += dram_init.o
diff --git a/arch/avr32/lib/bootm.c b/arch/avr32/lib/bootm.c
deleted file mode 100644
index 342b9e2c1c..0000000000
--- a/arch/avr32/lib/bootm.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-#include <command.h>
-#include <image.h>
-#include <u-boot/zlib.h>
-#include <asm/byteorder.h>
-#include <asm/arch/addrspace.h>
-#include <asm/io.h>
-#include <asm/setup.h>
-#include <asm/arch/clk.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* CPU-specific hook to allow flushing of caches, etc. */
-extern void prepare_to_boot(void);
-
-static struct tag *setup_start_tag(struct tag *params)
-{
- params->hdr.tag = ATAG_CORE;
- params->hdr.size = tag_size(tag_core);
-
- params->u.core.flags = 0;
- params->u.core.pagesize = 4096;
- params->u.core.rootdev = 0;
-
- return tag_next(params);
-}
-
-static struct tag *setup_memory_tags(struct tag *params)
-{
- bd_t *bd = gd->bd;
- int i;
-
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
- params->hdr.tag = ATAG_MEM;
- params->hdr.size = tag_size(tag_mem_range);
-
- params->u.mem_range.addr = bd->bi_dram[i].start;
- params->u.mem_range.size = bd->bi_dram[i].size;
-
- params = tag_next(params);
- }
-
- return params;
-}
-
-static struct tag *setup_commandline_tag(struct tag *params, char *cmdline)
-{
- if (!cmdline)
- return params;
-
- /* eat leading white space */
- while (*cmdline == ' ') cmdline++;
-
- /*
- * Don't include tags for empty command lines; let the kernel
- * use its default command line.
- */
- if (*cmdline == '\0')
- return params;
-
- params->hdr.tag = ATAG_CMDLINE;
- params->hdr.size =
- (sizeof (struct tag_header) + strlen(cmdline) + 1 + 3) >> 2;
- strcpy(params->u.cmdline.cmdline, cmdline);
-
- return tag_next(params);
-}
-
-static struct tag *setup_ramdisk_tag(struct tag *params,
- unsigned long rd_start,
- unsigned long rd_end)
-{
- if (rd_start == rd_end)
- return params;
-
- params->hdr.tag = ATAG_RDIMG;
- params->hdr.size = tag_size(tag_mem_range);
-
- params->u.mem_range.addr = rd_start;
- params->u.mem_range.size = rd_end - rd_start;
-
- return tag_next(params);
-}
-
-static struct tag *setup_clock_tags(struct tag *params)
-{
- params->hdr.tag = ATAG_CLOCK;
- params->hdr.size = tag_size(tag_clock);
- params->u.clock.clock_id = ACLOCK_BOOTCPU;
- params->u.clock.clock_flags = 0;
- params->u.clock.clock_hz = gd->arch.cpu_hz;
-
-#ifdef CONFIG_AT32AP7000
- /*
- * New kernels don't need this, but we should be backwards
- * compatible for a while...
- */
- params = tag_next(params);
-
- params->hdr.tag = ATAG_CLOCK;
- params->hdr.size = tag_size(tag_clock);
- params->u.clock.clock_id = ACLOCK_HSB;
- params->u.clock.clock_flags = 0;
- params->u.clock.clock_hz = get_hsb_clk_rate();
-#endif
-
- return tag_next(params);
-}
-
-static struct tag *setup_ethernet_tag(struct tag *params,
- char *addr, int index)
-{
- char *s, *e;
- int i;
-
- params->hdr.tag = ATAG_ETHERNET;
- params->hdr.size = tag_size(tag_ethernet);
-
- params->u.ethernet.mac_index = index;
- params->u.ethernet.mii_phy_addr = gd->bd->bi_phy_id[index];
-
- s = addr;
- for (i = 0; i < 6; i++) {
- params->u.ethernet.hw_address[i] = simple_strtoul(s, &e, 16);
- s = e + 1;
- }
-
- return tag_next(params);
-}
-
-static struct tag *setup_ethernet_tags(struct tag *params)
-{
- char name[16] = "ethaddr";
- char *addr;
- int i = 0;
-
- do {
- addr = getenv(name);
- if (addr)
- params = setup_ethernet_tag(params, addr, i);
- sprintf(name, "eth%daddr", ++i);
- } while (i < 4);
-
- return params;
-}
-
-static struct tag *setup_boardinfo_tag(struct tag *params)
-{
- params->hdr.tag = ATAG_BOARDINFO;
- params->hdr.size = tag_size(tag_boardinfo);
-
- params->u.boardinfo.board_number = gd->bd->bi_board_number;
-
- return tag_next(params);
-}
-
-static void setup_end_tag(struct tag *params)
-{
- params->hdr.tag = ATAG_NONE;
- params->hdr.size = 0;
-}
-
-int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *images)
-{
- void (*theKernel)(int magic, void *tagtable);
- struct tag *params, *params_start;
- char *commandline = getenv("bootargs");
-
- /*
- * allow the PREP bootm subcommand, it is required for bootm to work
- *
- * TODO: Andreas Bießmann <andreas@biessmann.org> refactor the
- * do_bootm_linux() for avr32
- */
- if (flag & BOOTM_STATE_OS_PREP)
- return 0;
-
- if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
- return 1;
-
- theKernel = (void *)images->ep;
-
- bootstage_mark(BOOTSTAGE_ID_RUN_OS);
-
- params = params_start = (struct tag *)gd->bd->bi_boot_params;
- params = setup_start_tag(params);
- params = setup_memory_tags(params);
- if (images->rd_start) {
- params = setup_ramdisk_tag(params,
- PHYSADDR(images->rd_start),
- PHYSADDR(images->rd_end));
- }
- params = setup_commandline_tag(params, commandline);
- params = setup_clock_tags(params);
- params = setup_ethernet_tags(params);
- params = setup_boardinfo_tag(params);
- setup_end_tag(params);
-
- printf("\nStarting kernel at %p (params at %p)...\n\n",
- theKernel, params_start);
-
- prepare_to_boot();
-
- theKernel(ATAG_MAGIC, params_start);
- /* does not return */
-
- return 1;
-}
diff --git a/arch/avr32/lib/dram_init.c b/arch/avr32/lib/dram_init.c
deleted file mode 100644
index 79c2455bd6..0000000000
--- a/arch/avr32/lib/dram_init.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (C) 2015 Andreas Bießmann <andreas@biessmann.org>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int dram_init(void)
-{
- /* check for the maximum amount of memory possible on AP7000 devices */
- gd->ram_size = get_ram_size(
- (void *)CONFIG_SYS_SDRAM_BASE,
- (256<<20));
- return 0;
-}
diff --git a/arch/avr32/lib/interrupts.c b/arch/avr32/lib/interrupts.c
deleted file mode 100644
index 5f3a49e152..0000000000
--- a/arch/avr32/lib/interrupts.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-
-#include <asm/sysreg.h>
-
-int interrupt_init(void)
-{
- return 0;
-}
-
-void enable_interrupts(void)
-{
- asm volatile("csrf %0" : : "n"(SYSREG_GM_OFFSET));
-}
-
-int disable_interrupts(void)
-{
- unsigned long sr;
-
- sr = sysreg_read(SR);
- asm volatile("ssrf %0" : : "n"(SYSREG_GM_OFFSET));
-
-#ifdef CONFIG_AT32UC3A0xxx
- /* Two NOPs are required after masking interrupts on the
- * AT32UC3A0512ES. See errata 41.4.5.5. */
- asm("nop");
- asm("nop");
-#endif
-
- return !SYSREG_BFEXT(GM, sr);
-}
diff --git a/arch/avr32/lib/memset.S b/arch/avr32/lib/memset.S
deleted file mode 100644
index ac2d38860e..0000000000
--- a/arch/avr32/lib/memset.S
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
- /*
- * r12: void *b
- * r11: int c
- * r10: size_t len
- *
- * Returns b in r12
- */
- .section .text.memset, "ax", @progbits
-
- .global memset
- .type memset, @function
- .align 2
-memset:
- mov r9, r12
- mov r8, r12
- or r11, r11, r11 << 8
- andl r9, 3, COH
- brne 1f
-
-2: or r11, r11, r11 << 16
- sub r10, 4
- brlt 5f
-
- /* Let's do some real work */
-4: st.w r8++, r11
- sub r10, 4
- brge 4b
-
- /*
- * When we get here, we've got less than 4 bytes to set. r10
- * might be negative.
- */
-5: sub r10, -4
- reteq r12
-
- /* Fastpath ends here, exactly 32 bytes from memset */
-
- /* Handle unaligned count or pointer */
- bld r10, 1
- brcc 6f
- st.b r8++, r11
- st.b r8++, r11
- bld r10, 0
- retcc r12
-6: st.b r8++, r11
- mov pc, lr
-
- /* Handle unaligned pointer */
-1: sub r10, 4
- brlt 5b
- add r10, r9
- lsl r9, 1
- add pc, r9
- st.b r8++, r11
- st.b r8++, r11
- st.b r8++, r11
- rjmp 2b
-
- .size memset, . - memset
diff --git a/board/atmel/atngw100/Kconfig b/board/atmel/atngw100/Kconfig
deleted file mode 100644
index 28037b67b4..0000000000
--- a/board/atmel/atngw100/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_ATNGW100
-
-config SYS_BOARD
- default "atngw100"
-
-config SYS_VENDOR
- default "atmel"
-
-config SYS_SOC
- default "at32ap700x"
-
-config SYS_CONFIG_NAME
- default "atngw100"
-
-endif
diff --git a/board/atmel/atngw100/MAINTAINERS b/board/atmel/atngw100/MAINTAINERS
deleted file mode 100644
index 1c319f66b4..0000000000
--- a/board/atmel/atngw100/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-ATNGW100 BOARD
-#M: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
-S: Orphan (since 2014-06)
-F: board/atmel/atngw100/
-F: include/configs/atngw100.h
-F: configs/atngw100_defconfig
diff --git a/board/atmel/atngw100/Makefile b/board/atmel/atngw100/Makefile
deleted file mode 100644
index f9b93c9738..0000000000
--- a/board/atmel/atngw100/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Copyright (C) 2005-2006 Atmel Corporation
-#
-# SPDX-License-Identifier: GPL-2.0+
-
-obj-y := atngw100.o
diff --git a/board/atmel/atngw100/atngw100.c b/board/atmel/atngw100/atngw100.c
deleted file mode 100644
index dacd427831..0000000000
--- a/board/atmel/atngw100/atngw100.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-
-#include <asm/io.h>
-#include <asm/sdram.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/hmatrix.h>
-#include <asm/arch/mmu.h>
-#include <asm/arch/portmux.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = {
- {
- .virt_pgno = CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT,
- .nr_pages = CONFIG_SYS_FLASH_SIZE >> MMU_PAGE_SHIFT,
- .phys = (CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT)
- | MMU_VMR_CACHE_NONE,
- }, {
- .virt_pgno = CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT,
- .nr_pages = EBI_SDRAM_SIZE >> MMU_PAGE_SHIFT,
- .phys = (CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT)
- | MMU_VMR_CACHE_WRBACK,
- },
-};
-
-static const struct sdram_config sdram_config = {
- .data_bits = SDRAM_DATA_16BIT,
- .row_bits = 13,
- .col_bits = 9,
- .bank_bits = 2,
- .cas = 3,
- .twr = 2,
- .trc = 7,
- .trp = 2,
- .trcd = 2,
- .tras = 5,
- .txsr = 5,
- /* 7.81 us */
- .refresh_period = (781 * (SDRAMC_BUS_HZ / 1000)) / 100000,
-};
-
-int board_early_init_f(void)
-{
- /* Enable SDRAM in the EBI mux */
- hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
-
- portmux_enable_ebi(16, 23, 0, PORTMUX_DRIVE_HIGH);
- sdram_init(uncached(EBI_SDRAM_BASE), &sdram_config);
-
- portmux_enable_usart1(PORTMUX_DRIVE_MIN);
-
-#if defined(CONFIG_MACB)
- portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);
- portmux_enable_macb1(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);
-#endif
-#if defined(CONFIG_MMC)
- portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW);
-#endif
-#if defined(CONFIG_ATMEL_SPI)
- portmux_enable_spi0(1 << 0, PORTMUX_DRIVE_LOW);
-#endif
-
- return 0;
-}
-
-int board_early_init_r(void)
-{
- gd->bd->bi_phy_id[0] = 0x01;
- gd->bd->bi_phy_id[1] = 0x03;
- return 0;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bi)
-{
- macb_eth_initialize(0, (void *)ATMEL_BASE_MACB0, bi->bi_phy_id[0]);
- macb_eth_initialize(1, (void *)ATMEL_BASE_MACB1, bi->bi_phy_id[1]);
- return 0;
-}
-#endif
-
-/* SPI chip select control */
-#ifdef CONFIG_ATMEL_SPI
-#include <spi.h>
-
-#define ATNGW100_DATAFLASH_CS_PIN GPIO_PIN_PA(3)
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- return bus == 0 && cs == 0;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
- gpio_set_value(ATNGW100_DATAFLASH_CS_PIN, 0);
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
- gpio_set_value(ATNGW100_DATAFLASH_CS_PIN, 1);
-}
-#endif /* CONFIG_ATMEL_SPI */
diff --git a/board/atmel/atngw100mkii/Kconfig b/board/atmel/atngw100mkii/Kconfig
deleted file mode 100644
index ca04269080..0000000000
--- a/board/atmel/atngw100mkii/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_ATNGW100MKII
-
-config SYS_BOARD
- default "atngw100mkii"
-
-config SYS_VENDOR
- default "atmel"
-
-config SYS_SOC
- default "at32ap700x"
-
-config SYS_CONFIG_NAME
- default "atngw100mkii"
-
-endif
diff --git a/board/atmel/atngw100mkii/MAINTAINERS b/board/atmel/atngw100mkii/MAINTAINERS
deleted file mode 100644
index 54eb1da4c2..0000000000
--- a/board/atmel/atngw100mkii/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-ATNGW100MKII BOARD
-M: Andreas Bießmann <andreas@biessmann.org>
-S: Maintained
-F: board/atmel/atngw100mkii/
-F: include/configs/atngw100mkii.h
-F: configs/atngw100mkii_defconfig
diff --git a/board/atmel/atngw100mkii/Makefile b/board/atmel/atngw100mkii/Makefile
deleted file mode 100644
index 90bf5bc84e..0000000000
--- a/board/atmel/atngw100mkii/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Copyright (C) 2005-2006 Atmel Corporation
-#
-# SPDX-License-Identifier: GPL-2.0+
-
-obj-y := atngw100mkii.o
diff --git a/board/atmel/atngw100mkii/atngw100mkii.c b/board/atmel/atngw100mkii/atngw100mkii.c
deleted file mode 100644
index 68662c4045..0000000000
--- a/board/atmel/atngw100mkii/atngw100mkii.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Copyright (C) 2010 Atmel Corporation
- *
- * Copyright (C) 2012 Andreas Bießmann <andreas@biessmann.org>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-
-#include <spi.h>
-#include <netdev.h>
-
-#include <asm/io.h>
-#include <asm/sdram.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/hmatrix.h>
-#include <asm/arch/mmu.h>
-#include <asm/arch/portmux.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = {
- {
- /* Atmel AT49BV640D 8 MiB x16 NOR flash on NCS0 */
- .virt_pgno = CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT,
- .nr_pages = CONFIG_SYS_FLASH_SIZE >> MMU_PAGE_SHIFT,
- .phys = (CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT)
- | MMU_VMR_CACHE_NONE,
- }, {
- /* Micron MT29F2G16AAD 256 MiB x16 NAND flash on NCS3 */
- .virt_pgno = EBI_SRAM_CS3_BASE >> MMU_PAGE_SHIFT,
- .nr_pages = EBI_SRAM_CS3_SIZE >> MMU_PAGE_SHIFT,
- .phys = (EBI_SRAM_CS3_BASE >> MMU_PAGE_SHIFT)
- | MMU_VMR_CACHE_NONE,
- }, {
- /* 2x16-bit ISSI IS42S16320B 64 MiB SDRAM (128 MiB total) */
- .virt_pgno = CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT,
- .nr_pages = EBI_SDRAM_SIZE >> MMU_PAGE_SHIFT,
- .phys = (CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT)
- | MMU_VMR_CACHE_WRBACK,
- },
-};
-
-static const struct sdram_config sdram_config = {
- .data_bits = SDRAM_DATA_32BIT,
- .row_bits = 13,
- .col_bits = 10,
- .bank_bits = 2,
- .cas = 3,
- .twr = 2,
- .trc = 7,
- .trp = 2,
- .trcd = 2,
- .tras = 5,
- .txsr = 6,
- /* 7.81 us */
- .refresh_period = (781 * (SDRAMC_BUS_HZ / 1000)) / 100000,
-};
-
-int board_early_init_f(void)
-{
- /* Enable SDRAM in the EBI mux */
- hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE)
- | HMATRIX_BIT(EBI_NAND_ENABLE));
-
- portmux_enable_ebi(32, 23, PORTMUX_EBI_NAND,
- PORTMUX_DRIVE_HIGH);
- portmux_select_gpio(PORTMUX_PORT_E, 1 << 23,
- PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH
- | PORTMUX_DRIVE_MIN);
-
- sdram_init(uncached(EBI_SDRAM_BASE), &sdram_config);
-
- portmux_enable_usart1(PORTMUX_DRIVE_MIN);
-
-#if defined(CONFIG_MACB)
- portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);
- portmux_enable_macb1(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);
-#endif
-#if defined(CONFIG_MMC)
- portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW);
-#endif
-#if defined(CONFIG_ATMEL_SPI)
- portmux_enable_spi0(1 << 0, PORTMUX_DRIVE_LOW);
-#endif
-
- return 0;
-}
-
-int board_early_init_r(void)
-{
- gd->bd->bi_phy_id[0] = 0x01;
- gd->bd->bi_phy_id[1] = 0x03;
- return 0;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bi)
-{
- macb_eth_initialize(0, (void *)ATMEL_BASE_MACB0, bi->bi_phy_id[0]);
- macb_eth_initialize(1, (void *)ATMEL_BASE_MACB1, bi->bi_phy_id[1]);
- return 0;
-}
-#endif
-
-/* SPI chip select control */
-#ifdef CONFIG_ATMEL_SPI
-#define ATNGW100_DATAFLASH_CS_PIN GPIO_PIN_PA(3)
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- return bus == 0 && cs == 0;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
- gpio_set_value(ATNGW100_DATAFLASH_CS_PIN, 0);
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
- gpio_set_value(ATNGW100_DATAFLASH_CS_PIN, 1);
-}
-#endif /* CONFIG_ATMEL_SPI */
diff --git a/board/atmel/atstk1000/Kconfig b/board/atmel/atstk1000/Kconfig
deleted file mode 100644
index b4fa9a2b38..0000000000
--- a/board/atmel/atstk1000/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_ATSTK1002
-
-config SYS_BOARD
- default "atstk1000"
-
-config SYS_VENDOR
- default "atmel"
-
-config SYS_SOC
- default "at32ap700x"
-
-config SYS_CONFIG_NAME
- default "atstk1002"
-
-endif
diff --git a/board/atmel/atstk1000/MAINTAINERS b/board/atmel/atstk1000/MAINTAINERS
deleted file mode 100644
index 1070f98e53..0000000000
--- a/board/atmel/atstk1000/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-ATSTK1000 BOARD
-M: Andreas Bießmann <andreas.biessmann@corscience.de>
-S: Maintained
-F: board/atmel/atstk1000/
-F: include/configs/atstk1002.h
-F: configs/atstk1002_defconfig
diff --git a/board/atmel/atstk1000/Makefile b/board/atmel/atstk1000/Makefile
deleted file mode 100644
index ad76631b97..0000000000
--- a/board/atmel/atstk1000/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# Copyright (C) 2005-2006 Atmel Corporation
-#
-# SPDX-License-Identifier: GPL-2.0+
-
-obj-y += atstk1000.o
diff --git a/board/atmel/atstk1000/atstk1000.c b/board/atmel/atstk1000/atstk1000.c
deleted file mode 100644
index 679b67432c..0000000000
--- a/board/atmel/atstk1000/atstk1000.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Copyright (C) 2005-2006 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-
-#include <asm/io.h>
-#include <asm/sdram.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/hmatrix.h>
-#include <asm/arch/mmu.h>
-#include <asm/arch/portmux.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = {
- {
- .virt_pgno = CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT,
- .nr_pages = CONFIG_SYS_FLASH_SIZE >> MMU_PAGE_SHIFT,
- .phys = (CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT)
- | MMU_VMR_CACHE_NONE,
- }, {
- .virt_pgno = CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT,
- .nr_pages = EBI_SDRAM_SIZE >> MMU_PAGE_SHIFT,
- .phys = (CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT)
- | MMU_VMR_CACHE_WRBACK,
- },
-};
-
-static const struct sdram_config sdram_config = {
- .data_bits = SDRAM_DATA_32BIT,
-#ifdef CONFIG_ATSTK1000_16MB_SDRAM
- /* MT48LC4M32B2P-6 (16 MB) on mod'ed motherboard */
- .row_bits = 12,
-#else
- /* MT48LC2M32B2P-5 (8 MB) on motherboard */
- .row_bits = 11,
-#endif
- .col_bits = 8,
- .bank_bits = 2,
- .cas = 3,
- .twr = 2,
- .trc = 7,
- .trp = 2,
- .trcd = 2,
- .tras = 5,
- .txsr = 5,
- /* 15.6 us */
- .refresh_period = (156 * (SDRAMC_BUS_HZ / 1000)) / 10000,
-};
-
-int board_early_init_f(void)
-{
- /* Enable SDRAM in the EBI mux */
- hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
-
- portmux_enable_ebi(sdram_config.data_bits, 23, 0, PORTMUX_DRIVE_HIGH);
- sdram_init(uncached(EBI_SDRAM_BASE), &sdram_config);
-
- portmux_enable_usart1(PORTMUX_DRIVE_MIN);
-
-#if defined(CONFIG_MACB)
- portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_LOW);
- portmux_enable_macb1(PORTMUX_MACB_MII, PORTMUX_DRIVE_LOW);
-#endif
-#if defined(CONFIG_MMC)
- portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW);
-#endif
-
- return 0;
-}
-
-int board_early_init_r(void)
-{
- gd->bd->bi_phy_id[0] = 0x10;
- gd->bd->bi_phy_id[1] = 0x11;
- return 0;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bi)
-{
- macb_eth_initialize(0, (void *)ATMEL_BASE_MACB0, bi->bi_phy_id[0]);
- macb_eth_initialize(1, (void *)ATMEL_BASE_MACB1, bi->bi_phy_id[1]);
- return 0;
-}
-#endif
diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c
index 89b73f4fb9..401a694712 100644
--- a/cmd/bdinfo.c
+++ b/cmd/bdinfo.c
@@ -83,9 +83,6 @@ static inline void print_bi_mem(const bd_t *bd)
#elif defined(CONFIG_ARC)
print_num("mem start", (ulong)bd->bi_memstart);
print_lnum("mem size", (u64)bd->bi_memsize);
-#elif defined(CONFIG_AVR32)
- print_num("memstart", (ulong)bd->bi_dram[0].start);
- print_lnum("memsize", (u64)bd->bi_dram[0].size);
#else
print_num("memstart", (ulong)bd->bi_memstart);
print_lnum("memsize", (u64)bd->bi_memsize);
@@ -300,14 +297,6 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
return 0;
}

-#elif defined(CONFIG_AVR32)
-
-int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- print_std_bdinfo(gd->bd);
- return 0;
-}
-
#elif defined(CONFIG_ARM)

static int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc,
diff --git a/common/board_r.c b/common/board_r.c
index adc1f1937e..3341a528b0 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -57,9 +57,6 @@
#include <dm/root.h>
#include <linux/compiler.h>
#include <linux/err.h>
-#ifdef CONFIG_AVR32
-#include <asm/arch/mmu.h>
-#endif
#include <efi_loader.h>

DECLARE_GLOBAL_DATA_PTR;
@@ -526,7 +523,7 @@ static int initr_api(void)
#endif

/* enable exceptions */
-#if defined(CONFIG_ARM) || defined(CONFIG_AVR32)
+#ifdef CONFIG_ARM
static int initr_enable_interrupts(void)
{
enable_interrupts();
@@ -845,10 +842,10 @@ static init_fnc_t init_sequence_r[] = {
initr_kgdb,
#endif
interrupt_init,
-#if defined(CONFIG_ARM) || defined(CONFIG_AVR32)
+#ifdef CONFIG_ARM
initr_enable_interrupts,
#endif
-#if defined(CONFIG_MICROBLAZE) || defined(CONFIG_AVR32) || defined(CONFIG_M68K)
+#if defined(CONFIG_MICROBLAZE) || defined(CONFIG_M68K)
timer_init, /* initialize timer */
#endif
#if defined(CONFIG_LED_STATUS)
@@ -919,10 +916,6 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
int i;
#endif

-#ifdef CONFIG_AVR32
- mmu_init_r(dest_addr);
-#endif
-
#if !defined(CONFIG_X86) && !defined(CONFIG_ARM) && !defined(CONFIG_ARM64)
gd = new_gd;
#endif
diff --git a/configs/atngw100_defconfig b/configs/atngw100_defconfig
deleted file mode 100644
index 17db763867..0000000000
--- a/configs/atngw100_defconfig
+++ /dev/null
@@ -1,26 +0,0 @@
-CONFIG_AVR32=y
-CONFIG_TARGET_ATNGW100=y
-CONFIG_BOOTDELAY=1
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SYS_PROMPT="U-Boot> "
-CONFIG_AUTOBOOT_KEYED=y
-CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
-CONFIG_AUTOBOOT_DELAY_STR="d"
-CONFIG_AUTOBOOT_STOP_STR=" "
-# CONFIG_CMD_ELF is not set
-# CONFIG_CMD_XIMG is not set
-CONFIG_CMD_ASKENV=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_SOURCE is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_JFFS2=y
-CONFIG_MMC=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_ATMEL=y
diff --git a/configs/atngw100mkii_defconfig b/configs/atngw100mkii_defconfig
deleted file mode 100644
index 887c5fb8d7..0000000000
--- a/configs/atngw100mkii_defconfig
+++ /dev/null
@@ -1,26 +0,0 @@
-CONFIG_AVR32=y
-CONFIG_TARGET_ATNGW100MKII=y
-CONFIG_BOOTDELAY=1
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SYS_PROMPT="U-Boot> "
-CONFIG_AUTOBOOT_KEYED=y
-CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
-CONFIG_AUTOBOOT_DELAY_STR="d"
-CONFIG_AUTOBOOT_STOP_STR=" "
-# CONFIG_CMD_ELF is not set
-# CONFIG_CMD_XIMG is not set
-CONFIG_CMD_ASKENV=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_JFFS2=y
-CONFIG_MMC=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_ATMEL=y
diff --git a/configs/atstk1002_defconfig b/configs/atstk1002_defconfig
deleted file mode 100644
index 0fa7969e47..0000000000
--- a/configs/atstk1002_defconfig
+++ /dev/null
@@ -1,22 +0,0 @@
-CONFIG_AVR32=y
-CONFIG_TARGET_ATSTK1002=y
-CONFIG_BOOTDELAY=1
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SYS_PROMPT="U-Boot> "
-CONFIG_AUTOBOOT_KEYED=y
-CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
-CONFIG_AUTOBOOT_DELAY_STR="d"
-CONFIG_AUTOBOOT_STOP_STR=" "
-# CONFIG_CMD_ELF is not set
-# CONFIG_CMD_XIMG is not set
-CONFIG_CMD_ASKENV=y
-CONFIG_CMD_MMC=y
-# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_SOURCE is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_JFFS2=y
-CONFIG_MMC=y
-CONFIG_MTD_NOR_FLASH=y
diff --git a/configs/grasshopper_defconfig b/configs/grasshopper_defconfig
deleted file mode 100644
index 024231dbc6..0000000000
--- a/configs/grasshopper_defconfig
+++ /dev/null
@@ -1,18 +0,0 @@
-CONFIG_AVR32=y
-CONFIG_TARGET_GRASSHOPPER=y
-CONFIG_BOOTDELAY=1
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="U-Boot> "
-CONFIG_AUTOBOOT_KEYED=y
-CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
-CONFIG_AUTOBOOT_DELAY_STR="d"
-CONFIG_AUTOBOOT_STOP_STR=" "
-# CONFIG_CMD_ELF is not set
-CONFIG_CMD_ASKENV=y
-# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_JFFS2=y
-CONFIG_MTD_NOR_FLASH=y
diff --git a/doc/README.AVR32 b/doc/README.AVR32
deleted file mode 100644
index 632cc0546d..0000000000
--- a/doc/README.AVR32
+++ /dev/null
@@ -1,25 +0,0 @@
-AVR32 is a new high-performance 32-bit RISC microprocessor core,
-designed for cost-sensitive embedded applications, with particular
-emphasis on low power consumption and high code density. The AVR32
-architecture is not binary compatible with earlier 8-bit AVR
-architectures.
-
-The AVR32 architecture, including the instruction set, is described
-by the AVR32 Architecture Manual, available from
-
-http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf
-
-A GNU toolchain with support for AVR32, along with non-GNU programming
-and debugging support, can be downloaded from
-
-http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4118
-
-A full set of u-boot, kernel and filesystem images can be built using
-buildroot. This will also produce a working toolchain which can be
-used instead of the official GNU toolchain above. A customized version
-of buildroot for AVR32 can be downloaded here:
-
-http://www.atmel.no/buildroot/
-
-The AVR32 ports of u-boot, the Linux kernel, the GNU toolchain and
-other associated software are actively supported by Atmel Corporation.
diff --git a/doc/README.AVR32-port-muxing b/doc/README.AVR32-port-muxing
deleted file mode 100644
index 8c1718cdca..0000000000
--- a/doc/README.AVR32-port-muxing
+++ /dev/null
@@ -1,208 +0,0 @@
-AVR32 Port multiplexer configuration
-====================================
-
-On AVR32 chips, most external I/O pins are routed through a port
-multiplexer. There are currently two kinds of port multiplexer
-hardware around with different register interfaces:
-
- * PIO (AT32AP700x; this is also used on ARM AT91 chips)
- * GPIO (all other AVR32 chips)
-
-The "PIO" variant supports multiplexing up to two peripherals per pin
-in addition to GPIO (software control). Each pin has configurable
-pull-up, glitch filter, interrupt and multi-drive capabilities.
-
-The "GPIO" variant supports multiplexing up to four peripherals per
-pin in addition to GPIO. Each pin has configurable
-pull-up/pull-down/buskeeper, glitch filter, interrupt, open-drain and
-schmitt-trigger capabilities, as well as configurable drive strength
-and slew rate control.
-
-Both controllers are configured using the same API, but the functions
-may accept different values for some parameters depending on the
-actual portmux implementation, and some parameters may be ignored by
-one of the implementation (e.g. the "PIO" implementation will ignore
-the drive strength flags since the hardware doesn't support
-configurable drive strength.)
-
-Selecting the portmux implementation
-------------------------------------
-Since u-boot is lacking a Kconfig-style configuration engine, the
-portmux implementation must be selected manually by defining one of
-the following symbols:
-
- CONFIG_PORTMUX_PIO
- CONFIG_PORTMUX_GPIO
-
-depending on which implementation the chip in question uses.
-
-Identifying pins
-----------------
-The portmux configuration functions described below identify the pins
-to act on based on two parameters: A "port" (i.e. a block of pins
-that somehow belong together) and a pin mask. Both are defined in an
-implementation-specific manner.
-
-The available ports are defined on the form
-
- #define PORTMUX_PORT_A (something)
-
-where "A" matches the identifier given in the chip's data sheet, and
-"something" is whatever the portmux implementation needs to identify
-the port (usually a memory address).
-
-The pin mask is a bitmask where each '1' bit indicates a pin to apply
-the current operation to. The width of the bitmask may vary from port
-to port, but it is never wider than 32 bits (which is the width of
-'unsigned long' on avr32).
-
-Selecting functions
--------------------
-Each pin can either be assigned to one of a predefined set of on-chip
-peripherals, or it can be set up to be controlled by software. For the
-former case, the portmux implementation defines an enum containing all
-the possible peripheral functions that can be selected. For example,
-the PIO implementation, which allows multiplexing two peripherals per
-pin, defines it like this:
-
- enum portmux_function {
- PORTMUX_FUNC_A,
- PORTMUX_FUNC_B,
- };
-
-To configure a set of pins to be connected to a given peripheral
-function, the following function is used.
-
- void portmux_select_peripheral(void *port, unsigned long pin_mask,
- enum portmux_function func, unsigned long flags);
-
-To configure a set of pins to be controlled by software (GPIO), the
-following function is used. In this case, no "function" argument is
-required since "GPIO" is a function in its own right.
-
- void portmux_select_gpio(void *port, unsigned int pin_mask,
- unsigned long flags);
-
-Both of these functions take a "flags" parameter which may be used to
-alter the default configuration of the pin. This is a bitmask of
-various flags defined in an implementation-specific way, but the names
-of the flags are the same on all implementations.
-
- PORTMUX_DIR_OUTPUT
- PORTMUX_DIR_INPUT
-
-These mutually-exclusive flags configure the initial direction of the
-pins. PORTMUX_DIR_OUTPUT means that the pins are driven by the CPU,
-while PORTMUX_DIR_INPUT means that the pins are tristated by the CPU.
-These flags are ignored by portmux_select_peripheral().
-
- PORTMUX_INIT_HIGH
- PORTMUX_INIT_LOW
-
-These mutually-exclusive flags configure the initial state of the
-pins: High (Vdd) or low (Vss). They are only effective when
-portmux_select_gpio() is called with the PORTMUX_DIR_OUTPUT flag set.
-
- PORTMUX_PULL_UP
- PORTMUX_PULL_DOWN
- PORTMUX_BUSKEEPER
-
-These mutually-exclusive flags are used to enable any on-chip CMOS
-resistors connected to the pins. PORTMUX_PULL_UP causes the pins to be
-pulled up to Vdd, PORTMUX_PULL_DOWN causes the pins to be pulled down
-to Vss, and PORTMUX_BUSKEEPER will keep the pins in whatever state
-they were left in by whatever was driving them last. If none of the
-flags are specified, the pins are left floating if no one are driving
-them; this is only recommended for always-output pins (e.g. extern
-address and control lines driven by the CPU.)
-
-Note that the "PIO" implementation will silently ignore the
-PORTMUX_PULL_DOWN flag and interpret PORTMUX_BUSKEEPER as
-PORTMUX_PULL_UP.
-
- PORTMUX_DRIVE_MIN
- PORTMUX_DRIVE_LOW
- PORTMUX_DRIVE_HIGH
- PORTMUX_DRIVE_MAX
-
-These mutually-exclusive flags determine the drive strength of the
-pins. PORTMUX_DRIVE_MIN will give low power-consumption, but may cause
-corruption of high-speed signals. PORTMUX_DRIVE_MAX will give high
-power-consumption, but may be necessary on pins toggling at very high
-speeds. PORTMUX_DRIVE_LOW and PORTMUX_DRIVE_HIGH specify something in
-between the other two.
-
-Note that setting the drive strength too high may cause excessive
-overshoot and EMI problems, which may in turn cause signal corruption.
-Also note that the "PIO" implementation will silently ignore these
-flags.
-
- PORTMUX_OPEN_DRAIN
-
-This flag will configure the pins as "open drain", i.e. setting the
-pin state to 0 will drive it low, while setting it to 1 will leave it
-floating (or, in most cases, let it be pulled high by an internal or
-external pull-up resistor.) In the data sheet for chips using the
-"PIO" variant, this mode is called "multi-driver".
-
-Enabling specific peripherals
------------------------------
-In addition to the above functions, each chip provides a set of
-functions for setting up the port multiplexer to use a given
-peripheral. The following are some of the functions available.
-
-All the functions below take a "drive_strength" parameter, which must
-be one of the PORTMUX_DRIVE_x flags specified above. Any other
-portmux flags will be silently filtered out.
-
-To set up the External Bus Interface (EBI), call
-
- void portmux_enable_ebi(unsigned int bus_width,
- unsigned long flags, unsigned long drive_strength)
-
-where "bus_width" must be either 16 or 32. "flags" can be any
-combination of the following flags.
-
- PORTMUX_EBI_CS(x) /* Enable chip select x */
- PORTMUX_EBI_NAND /* Enable NAND flash interface */
- PORTMUX_EBI_CF(x) /* Enable CompactFlash interface x */
- PORTMUX_EBI_NWAIT /* Enable NWAIT signal */
-
-To set up a USART, call
-
- void portmux_enable_usartX(unsigned long drive_strength);
-
-where X is replaced by the USART instance to be configured.
-
-To set up an ethernet MAC:
-
- void portmux_enable_macbX(unsigned long flags,
- unsigned long drive_strength);
-
-where X is replaced by the MACB instance to be configured. "flags" can
-be any combination of the following flags.
-
- PORTMUX_MACB_RMII /* Just set up the RMII interface */
- PORTMUX_MACB_MII /* Set up full MII interface */
- PORTMUX_MACB_SPEED /* Enable the SPEED pin */
-
-To set up the MMC controller:
-
- void portmux_enable_mmci(unsigned long slot, unsigned long flags
- unsigned long drive_strength);
-
-where "slot" identifies which of the alternative SD card slots to
-enable. "flags" can be any combination of the following flags:
-
- PORTMUX_MMCI_4BIT /* Enable 4-bit SD card interface */
- PORTMUX_MMCI_8BIT /* Enable 8-bit MMC+ interface */
- PORTMUX_MMCI_EXT_PULLUP /* Board has external pull-ups */
-
-To set up a SPI controller:
-
- void portmux_enable_spiX(unsigned long cs_mask,
- unsigned long drive_strength);
-
-where X is replaced by the SPI instance to be configured. "cs_mask" is
-a 4-bit bitmask specifying which of the four standard chip select
-lines to set up as GPIOs.
diff --git a/doc/README.atmel_mci b/doc/README.atmel_mci
index 6043dabff7..6c027b089f 100644
--- a/doc/README.atmel_mci
+++ b/doc/README.atmel_mci
@@ -11,8 +11,7 @@ to write blocks.
- AT91SAM9260 (not tested, but MCI is to AT91SAM9XE)
- AT91SAM9G20 (not tested, should work)

-It should work with all other ATMEL devices that have MCI,
-including AVR32.
+It should work with all other ATMEL devices that have MCI.

The generic driver does NOT assign port pins to the MCI block
nor does it start the MCI clock. This has to be handled in a
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 5e5b07d95e..fc0873431a 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -94,12 +94,6 @@ vpac270_ond_256 arm pxa 452ef830 2015-08-30 Marek Vasut
xaeniax arm pxa 1c87dd76 2015-08-30
zipitz2 arm pxa 49d8899b 2015-08-30 Cliff Brake <cliff.brake@gmail.com>
cam_enc_4xx arm arm926ejs 8d775763 2015-08-20 Heiko Schocher <hs@denx.de>
-atstk1003 avr32 - e5354b8a 2015-06-10 Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
-atstk1004 avr32 - e5354b8a 2015-06-10 Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
-atstk1006 avr32 - e5354b8a 2015-06-10 Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
-mimc200 avr32 - c62d2f8f 2015-06-10 Mark Jackson <mpfj@mimc.co.uk>
-hammerhead avr32 - e3693076 2015-06-10 Alex Raimondi <alex.raimondi@miromico.ch>
-favr-32-ezkit avr32 - 9eb45aab 2015-06-10 Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
afeb9260 arm arm926ejs f6b42c14 2015-05-13 Sergey Lapin <slapin@ossfans.org>
tny_a9260 arm arm926ejs f6b42c14 2015-05-13 Albin Tonnerre <albin.tonnerre@free-electrons.com>
sbc35_a9g20 arm arm926ejs f6b42c14 2015-05-13 Albin Tonnerre <albin.tonnerre@free-electrons.com>
diff --git a/doc/git-mailrc b/doc/git-mailrc
index 04c6c8df9d..af10a3d68e 100644
--- a/doc/git-mailrc
+++ b/doc/git-mailrc
@@ -54,7 +54,7 @@ alias vapier Mike Frysinger <vapier@gentoo.org>
alias wd Wolfgang Denk <wd@denx.de>

# Architecture aliases
-alias arch arc, arm, avr32, bfin, m68k, microblaze, mips, nds32, nios2, powerpc, sandbox, superh, sparc, x86
+alias arch arc, arm, bfin, m68k, microblaze, mips, nds32, nios2, powerpc, sandbox, superh, sparc, x86
alias arches arch

alias arc uboot, abrodkin
@@ -79,7 +79,6 @@ alias ti uboot, trini
alias uniphier uboot, masahiro
alias zynq uboot, monstr
alias rockchip uboot, sjg, Kever Yang <kever.yang@rock-chips.com>, ptomsich
-alias avr32 uboot, abiessmann

alias bfin uboot, vapier, sonic
alias blackfin bfin
diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c
index de3758d946..50597a7d5a 100644
--- a/drivers/i2c/soft_i2c.c
+++ b/drivers/i2c/soft_i2c.c
@@ -17,8 +17,9 @@
*/

#include <common.h>
-#if defined(CONFIG_AVR32)
-#include <asm/arch/portmux.h>
+#ifdef CONFIG_MPC8260 /* only valid for MPC8260 */
+#include <ioports.h>
+#include <asm/io.h>
#endif
#if defined(CONFIG_AT91FAMILY)
#include <asm/io.h>
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index bef864f46e..fe01c737d7 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -37,8 +37,8 @@ config ATMEL_SPI
depends on ARCH_AT91
help
This enables driver for the Atmel SPI Controller, present on
- many AT32 (AVR32) and AT91 (ARM) chips. This driver can be
- used to access the SPI Flash, such as AT25DF321.
+ many AT91 (ARM) chips. This driver can be used to access
+ the SPI Flash, such as AT25DF321.

config CADENCE_QSPI
bool "Cadence QSPI driver"
diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h
index 92e462db60..c6d12d3a8e 100644
--- a/drivers/usb/gadget/atmel_usba_udc.h
+++ b/drivers/usb/gadget/atmel_usba_udc.h
@@ -44,13 +44,8 @@
#define USBA_REMOTE_WAKE_UP (1 << 10)
#define USBA_PULLD_DIS (1 << 11)

-#if defined(CONFIG_AVR32)
-#define USBA_ENABLE_MASK USBA_EN_USBA
-#define USBA_DISABLE_MASK 0
-#elif defined(CONFIG_AT91FAMILY)
#define USBA_ENABLE_MASK (USBA_EN_USBA | USBA_PULLD_DIS)
#define USBA_DISABLE_MASK USBA_DETACH
-#endif /* CONFIG_ARCH_AT91 */

/* Bitfields in FNUM */
#define USBA_MICRO_FRAME_NUM_OFFSET 0
diff --git a/drivers/usb/musb-new/musb_io.h b/drivers/usb/musb-new/musb_io.h
index 76682120f4..a4f4a6f8f4 100644
--- a/drivers/usb/musb-new/musb_io.h
+++ b/drivers/usb/musb-new/musb_io.h
@@ -22,7 +22,7 @@
#endif

#if !defined(CONFIG_ARM) && !defined(CONFIG_SUPERH) \
- && !defined(CONFIG_AVR32) && !defined(CONFIG_PPC32) \
+ && !defined(CONFIG_PPC32) \
&& !defined(CONFIG_PPC64) && !defined(CONFIG_MIPS) \
&& !defined(CONFIG_M68K)
static inline void readsl(const void __iomem *addr, void *buf, int len)
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index ed2bd306c6..2b9482a091 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -150,11 +150,7 @@ static void atmel_fb_init(ulong addr, struct display_timing *timing, int bpix,
value << ATMEL_LCDC_CLKVAL_OFFSET);

/* Initialize control register 2 */
-#ifdef CONFIG_AVR32
- value = ATMEL_LCDC_MEMOR_BIG | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE;
-#else
value = ATMEL_LCDC_MEMOR_LITTLE | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE;
-#endif
if (tft)
value |= ATMEL_LCDC_DISTYPE_TFT;

diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c
index d75abb660f..f54802052e 100644
--- a/drivers/video/cfb_console.c
+++ b/drivers/video/cfb_console.c
@@ -1968,7 +1968,7 @@ static void *video_logo(void)
static int cfb_fb_is_in_dram(void)
{
bd_t *bd = gd->bd;
-#if defined(CONFIG_ARM) || defined(CONFIG_AVR32) || defined(CONFIG_NDS32) || \
+#if defined(CONFIG_ARM) || defined(CONFIG_NDS32) || \
defined(CONFIG_SANDBOX) || defined(CONFIG_X86)
ulong start, end;
int i;
diff --git a/examples/standalone/stubs.c b/examples/standalone/stubs.c
index a6a9fcf189..9c7a8c00f8 100644
--- a/examples/standalone/stubs.c
+++ b/examples/standalone/stubs.c
@@ -141,19 +141,6 @@ gd_t *global_data;
" lwi r5, r5, %1\n" \
" bra r5\n" \
: : "i"(offsetof(gd_t, jt)), "i"(FO(x)) : "r5");
-#elif defined(CONFIG_AVR32)
-/*
- * r6 holds the pointer to the global_data. r8 is call clobbered.
- */
-#define EXPORT_FUNC(f, a, x, ...) \
- asm volatile( \
- " .globl\t" #x "\n" \
- #x ":\n" \
- " ld.w r8, r6[%0]\n" \
- " ld.w pc, r8[%1]\n" \
- : \
- : "i"(offsetof(gd_t, jt)), "i"(FO(x)) \
- : "r8");
#elif defined(CONFIG_SH)
/*
* r13 holds the pointer to the global_data. r1 is a call clobbered.
diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h
index b8f9c7aedb..789592992e 100644
--- a/include/asm-generic/u-boot.h
+++ b/include/asm-generic/u-boot.h
@@ -32,10 +32,6 @@ typedef struct bd_info {
unsigned long bi_flashoffset; /* reserved area for startup monitor */
unsigned long bi_sramstart; /* start of SRAM memory */
unsigned long bi_sramsize; /* size of SRAM memory */
-#ifdef CONFIG_AVR32
- unsigned char bi_phy_id[4]; /* PHY address for ATAG_ETHERNET */
- unsigned long bi_board_number;/* ATAG_BOARDINFO */
-#endif
#ifdef CONFIG_ARM
unsigned long bi_arm_freq; /* arm frequency */
unsigned long bi_dsp_freq; /* dsp core frequency */
diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h
deleted file mode 100644
index bf13d937fb..0000000000
--- a/include/configs/atngw100.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * Configuration settings for the AVR32 Network Gateway
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch/hardware.h>
-
-#define CONFIG_AT32AP
-#define CONFIG_AT32AP7000
-#define CONFIG_ATNGW100
-
-#define CONFIG_BOARD_EARLY_INIT_R
-
-/*
- * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
- * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
- * and the PBA bus to run at 1/4 the PLL frequency.
- */
-#define CONFIG_PLL
-#define CONFIG_SYS_POWER_MANAGER
-#define CONFIG_SYS_OSC0_HZ 20000000
-#define CONFIG_SYS_PLL0_DIV 1
-#define CONFIG_SYS_PLL0_MUL 7
-#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES 16
-#define CONFIG_SYS_CLKDIV_CPU 0
-#define CONFIG_SYS_CLKDIV_HSB 1
-#define CONFIG_SYS_CLKDIV_PBA 2
-#define CONFIG_SYS_CLKDIV_PBB 1
-
-/* Reserve VM regions for SDRAM and NOR flash */
-#define CONFIG_SYS_NR_VM_REGIONS 2
-
-/*
- * The PLLOPT register controls the PLL like this:
- * icp = PLLOPT<2>
- * ivco = PLLOPT<1:0>
- *
- * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
- */
-#define CONFIG_SYS_PLL0_OPT 0x04
-
-#define CONFIG_USART_BASE ATMEL_BASE_USART1
-#define CONFIG_USART_ID 1
-/* User serviceable stuff */
-
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-#define CONFIG_BOOTARGS \
- "console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2"
-#define CONFIG_BOOTCOMMAND \
- "fsload; bootm"
-
-
-/*
- * After booting the board for the first time, new ethernet addresses
- * should be generated and assigned to the environment variables
- * "ethaddr" and "eth1addr". This is normally done during production.
- */
-#define CONFIG_OVERWRITE_ETHADDR_ONCE
-
-/*
- * BOOTP/DHCP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-
-/*
- * Command line configuration.
- */
-
-#define CONFIG_ATMEL_USART
-#define CONFIG_MACB
-#define CONFIG_PORTMUX_PIO
-#define CONFIG_SYS_NR_PIOS 5
-#define CONFIG_SYS_HSDRAMC
-#define CONFIG_GENERIC_ATMEL_MCI
-#define CONFIG_ATMEL_SPI
-
-#define CONFIG_SYS_DCACHE_LINESZ 32
-#define CONFIG_SYS_ICACHE_LINESZ 32
-
-#define CONFIG_NR_DRAM_BANKS 1
-
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-
-#define CONFIG_SYS_FLASH_BASE 0x00000000
-#define CONFIG_SYS_FLASH_SIZE 0x800000
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 135
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_TEXT_BASE 0x00000000
-
-#define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE
-#define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE
-#define CONFIG_SYS_SDRAM_BASE EBI_SDRAM_BASE
-
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SIZE 65536
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE)
-
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
-
-#define CONFIG_SYS_MALLOC_LEN (256*1024)
-
-/* Allow 4MB for the kernel run-time image */
-#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
-#define CONFIG_SYS_BOOTPARAMS_LEN (16 * 1024)
-
-/* Other configuration settings that shouldn't have to change all that often */
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP
-
-#define CONFIG_SYS_MEMTEST_START EBI_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x1f00000)
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h
deleted file mode 100644
index a7f5e06c68..0000000000
--- a/include/configs/atngw100mkii.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * Copyright (C) 2012 Andreas Bießmann <andreas@biessmann.org>
- *
- * Configuration settings for the AVR32 Network Gateway
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch/hardware.h>
-
-#define CONFIG_AT32AP
-#define CONFIG_AT32AP7000
-#define CONFIG_ATNGW100MKII
-
-#define CONFIG_BOARD_EARLY_INIT_R
-
-/*
- * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
- * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
- * and the PBA bus to run at 1/4 the PLL frequency.
- */
-#define CONFIG_PLL
-#define CONFIG_SYS_POWER_MANAGER
-#define CONFIG_SYS_OSC0_HZ 20000000
-#define CONFIG_SYS_PLL0_DIV 1
-#define CONFIG_SYS_PLL0_MUL 7
-#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES 16
-/*
- * Set the CPU running at:
- * PLL / (2^CONFIG_SYS_CLKDIV_CPU) = CPU MHz
- */
-#define CONFIG_SYS_CLKDIV_CPU 0
-/*
- * Set the HSB running at:
- * PLL / (2^CONFIG_SYS_CLKDIV_HSB) = HSB MHz
- */
-#define CONFIG_SYS_CLKDIV_HSB 1
-/*
- * Set the PBA running at:
- * PLL / (2^CONFIG_SYS_CLKDIV_PBA) = PBA MHz
- */
-#define CONFIG_SYS_CLKDIV_PBA 2
-/*
- * Set the PBB running at:
- * PLL / (2^CONFIG_SYS_CLKDIV_PBB) = PBB MHz
- */
-#define CONFIG_SYS_CLKDIV_PBB 1
-
-/* Reserve VM regions for NOR flash, NAND flash and SDRAM */
-#define CONFIG_SYS_NR_VM_REGIONS 3
-
-/*
- * The PLLOPT register controls the PLL like this:
- * icp = PLLOPT<2>
- * ivco = PLLOPT<1:0>
- *
- * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
- */
-#define CONFIG_SYS_PLL0_OPT 0x04
-
-#define CONFIG_USART_BASE ATMEL_BASE_USART1
-#define CONFIG_USART_ID 1
-
-/* User serviceable stuff */
-
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-#define CONFIG_BOOTARGS \
- "root=mtd:main rootfstype=jffs2"
-#define CONFIG_BOOTCOMMAND \
- "fsload 0x10400000 /uImage; bootm"
-
-
-/*
- * After booting the board for the first time, new ethernet addresses
- * should be generated and assigned to the environment variables
- * "ethaddr" and "eth1addr". This is normally done during production.
- */
-#define CONFIG_OVERWRITE_ETHADDR_ONCE
-
-/*
- * BOOTP/DHCP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-
-/*
- * Command line configuration.
- */
-
-#define CONFIG_ATMEL_USART
-#define CONFIG_MACB
-#define CONFIG_PORTMUX_PIO
-#define CONFIG_SYS_NR_PIOS 5
-#define CONFIG_SYS_HSDRAMC
-#define CONFIG_GENERIC_ATMEL_MCI
-#define CONFIG_ATMEL_SPI
-
-#define CONFIG_SYS_DCACHE_LINESZ 32
-#define CONFIG_SYS_ICACHE_LINESZ 32
-
-#define CONFIG_NR_DRAM_BANKS 1
-
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_PROTECTION
-
-#define CONFIG_SYS_FLASH_BASE 0x00000000
-#define CONFIG_SYS_FLASH_SIZE 0x800000
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 135
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_TEXT_BASE 0x00000000
-
-#define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE
-#define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE
-#define CONFIG_SYS_SDRAM_BASE EBI_SDRAM_BASE
-
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SIZE 65536
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE)
-
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
-
-#define CONFIG_SYS_MALLOC_LEN (256*1024)
-
-/* Allow 4MB for the kernel run-time image */
-#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
-#define CONFIG_SYS_BOOTPARAMS_LEN (16 * 1024)
-
-/* Other configuration settings that shouldn't have to change all that often */
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP
-
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x1f00000)
-
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
deleted file mode 100644
index c8e9340af2..0000000000
--- a/include/configs/atstk1002.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Copyright (C) 2005-2006 Atmel Corporation
- *
- * Configuration settings for the ATSTK1002 CPU daughterboard
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch/hardware.h>
-
-#define CONFIG_AT32AP
-#define CONFIG_AT32AP7000
-#define CONFIG_ATSTK1002
-#define CONFIG_ATSTK1000
-
-/*
- * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
- * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
- * PLL frequency.
- * (CONFIG_SYS_OSC0_HZ * CONFIG_SYS_PLL0_MUL) / CONFIG_SYS_PLL0_DIV = PLL MHz
- */
-#define CONFIG_PLL
-#define CONFIG_SYS_POWER_MANAGER
-#define CONFIG_SYS_OSC0_HZ 20000000
-#define CONFIG_SYS_PLL0_DIV 1
-#define CONFIG_SYS_PLL0_MUL 7
-#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES 16
-/*
- * Set the CPU running at:
- * PLL / (2^CONFIG_SYS_CLKDIV_CPU) = CPU MHz
- */
-#define CONFIG_SYS_CLKDIV_CPU 0
-/*
- * Set the HSB running at:
- * PLL / (2^CONFIG_SYS_CLKDIV_HSB) = HSB MHz
- */
-#define CONFIG_SYS_CLKDIV_HSB 1
-/*
- * Set the PBA running at:
- * PLL / (2^CONFIG_SYS_CLKDIV_PBA) = PBA MHz
- */
-#define CONFIG_SYS_CLKDIV_PBA 2
-/*
- * Set the PBB running at:
- * PLL / (2^CONFIG_SYS_CLKDIV_PBB) = PBB MHz
- */
-#define CONFIG_SYS_CLKDIV_PBB 1
-
-/* Reserve VM regions for SDRAM and NOR flash */
-#define CONFIG_SYS_NR_VM_REGIONS 2
-
-/*
- * The PLLOPT register controls the PLL like this:
- * icp = PLLOPT<2>
- * ivco = PLLOPT<1:0>
- *
- * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
- */
-#define CONFIG_SYS_PLL0_OPT 0x04
-
-#define CONFIG_USART_BASE ATMEL_BASE_USART1
-#define CONFIG_USART_ID 1
-
-/* User serviceable stuff */
-
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-#define CONFIG_BOOTARGS \
- "console=ttyS0 root=/dev/mmcblk0p1 fbmem=600k rootwait=1"
-
-#define CONFIG_BOOTCOMMAND \
- "fsload; bootm $(fileaddr)"
-
-
-/*
- * After booting the board for the first time, new ethernet addresses
- * should be generated and assigned to the environment variables
- * "ethaddr" and "eth1addr". This is normally done during production.
- */
-#define CONFIG_OVERWRITE_ETHADDR_ONCE
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-
-/* generic board */
-#define CONFIG_BOARD_EARLY_INIT_R
-
-/*
- * Command line configuration.
- */
-
-#define CONFIG_ATMEL_USART
-#define CONFIG_MACB
-#define CONFIG_PORTMUX_PIO
-#define CONFIG_SYS_NR_PIOS 5
-#define CONFIG_SYS_HSDRAMC
-#define CONFIG_GENERIC_ATMEL_MCI
-
-#define CONFIG_SYS_DCACHE_LINESZ 32
-#define CONFIG_SYS_ICACHE_LINESZ 32
-
-#define CONFIG_NR_DRAM_BANKS 1
-
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-
-#define CONFIG_SYS_FLASH_BASE 0x00000000
-#define CONFIG_SYS_FLASH_SIZE 0x800000
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 135
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_TEXT_BASE 0x00000000
-
-#define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE
-#define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE
-#define CONFIG_SYS_SDRAM_BASE EBI_SDRAM_BASE
-
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SIZE 65536
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE)
-
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
-
-#define CONFIG_SYS_MALLOC_LEN (256*1024)
-
-/* Allow 4MB for the kernel run-time image */
-#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
-#define CONFIG_SYS_BOOTPARAMS_LEN (16 * 1024)
-
-/* Other configuration settings that shouldn't have to change all that often */
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP
-
-#define CONFIG_SYS_MEMTEST_START EBI_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x700000)
-#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
-
-#endif /* __CONFIG_H */
diff --git a/include/linux/fb.h b/include/linux/fb.h
index fcf331b79f..c820a4f77b 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -537,7 +537,7 @@ struct fb_info {
#define fb_writeq sbus_writeq
#define fb_memset sbus_memset_io

-#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || defined(__sh__) || defined(__powerpc__) || defined(__avr32__) || defined(__bfin__)
+#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || defined(__sh__) || defined(__powerpc__) || defined(__bfin__)

#define fb_readb __raw_readb
#define fb_readw __raw_readw
diff --git a/include/linux/stat.h b/include/linux/stat.h
index 1af0876621..5eba6334e6 100644
--- a/include/linux/stat.h
+++ b/include/linux/stat.h
@@ -126,7 +126,7 @@ struct stat {

#endif /* __MIPS__ */

-#if defined(__AVR32__) || defined(__SH__) || defined(__XTENSA__)
+#if defined(__SH__) || defined(__XTENSA__)

struct stat {
unsigned long st_dev;
@@ -149,7 +149,7 @@ struct stat {
unsigned long __unused5;
};

-#endif /* __AVR32__ || __SH__ || __XTENSA__ */
+#endif /* __SH__ || __XTENSA__ */

#ifdef __cplusplus
}
diff --git a/scripts/checkstack.pl b/scripts/checkstack.pl
index dd8397894d..f4f4a5fa47 100755
--- a/scripts/checkstack.pl
+++ b/scripts/checkstack.pl
@@ -12,7 +12,6 @@
# sh64 port by Paul Mundt
# Random bits by Matt Mackall <mpm@selenic.com>
# M68k port by Geert Uytterhoeven and Andreas Schwab
-# AVR32 port by Haavard Skinnemoen (Atmel)
# AArch64, PARISC ports by Kyle McMartin
# sparc port by Martin Habets <errandir_news@mph.eclipse.co.uk>
#
@@ -51,10 +50,6 @@ my (@stack, $re, $dre, $x, $xs, $funcre);
} elsif ($arch eq 'arm') {
#c0008ffc: e24dd064 sub sp, sp, #100 ; 0x64
$re = qr/.*sub.*sp, sp, #(([0-9]{2}|[3-9])[0-9]{2})/o;
- } elsif ($arch eq 'avr32') {
- #8000008a: 20 1d sub sp,4
- #80000ca8: fa cd 05 b0 sub sp,sp,1456
- $re = qr/^.*sub.*sp.*,([0-9]{1,8})/o;
} elsif ($arch =~ /^x86(_64)?$/ || $arch =~ /^i[3456]86$/) {
#c0105234: 81 ec ac 05 00 00 sub $0x5ac,%esp
# or
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 95f27b6ead..21616f171f 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -145,11 +145,6 @@ CONFIG_ATMEL_MCI_8BIT
CONFIG_ATMEL_NAND_HWECC
CONFIG_ATMEL_NAND_HW_PMECC
CONFIG_ATMEL_SPI0
-CONFIG_ATNGW100
-CONFIG_ATNGW100MKII
-CONFIG_ATSTK1000
-CONFIG_ATSTK1000_16MB_SDRAM
-CONFIG_ATSTK1002
CONFIG_AT_TRANS
CONFIG_AUTONEG_TIMEOUT
CONFIG_AUTO_COMPLETE
diff --git a/tools/buildman/README b/tools/buildman/README
index f66527665a..aaee58152b 100644
--- a/tools/buildman/README
+++ b/tools/buildman/README
@@ -343,12 +343,6 @@ Toolchain '/toolchains/gcc-4.6.3-nolibc/m68k-linux/bin/m68k-linux-gcc' at priori
- looking in '/toolchains/gcc-4.6.3-nolibc/powerpc-linux/usr/bin'
Tool chain test: OK, arch='powerpc', priority 4
Tool chain test: OK, arch='or32', priority 4
- - scanning path '/toolchains/gcc-4.2.4-nolibc/avr32-linux'
- - looking in '/toolchains/gcc-4.2.4-nolibc/avr32-linux/.'
- - looking in '/toolchains/gcc-4.2.4-nolibc/avr32-linux/bin'
- - found '/toolchains/gcc-4.2.4-nolibc/avr32-linux/bin/avr32-linux-gcc'
- - looking in '/toolchains/gcc-4.2.4-nolibc/avr32-linux/usr/bin'
-Tool chain test: OK, arch='avr32', priority 4
- scanning path '/'
- looking in '/.'
- looking in '/bin'
@@ -381,7 +375,6 @@ aarch64 : /toolchains/gcc-4.9.0-nolibc/aarch64-linux/bin/aarch64-linux-gcc
alpha : /toolchains/gcc-4.9.0-nolibc/alpha-linux/bin/alpha-linux-gcc
am33_2.0 : /toolchains/gcc-4.9.0-nolibc/am33_2.0-linux/bin/am33_2.0-linux-gcc
arm : /opt/arm-eabi-4.6/bin/arm-eabi-gcc
-avr32 : /toolchains/gcc-4.2.4-nolibc/avr32-linux/bin/avr32-linux-gcc
bfin : /toolchains/gcc-4.6.3-nolibc/bfin-uclinux/bin/bfin-uclinux-gcc
c89 : /usr/bin/c89-gcc
c99 : /usr/bin/c99-gcc
@@ -428,7 +421,7 @@ Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.6.3/
Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.6.2/
Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.5.1/
Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.2.4/
-Available architectures: alpha am33_2.0 arm avr32 bfin cris crisv32 frv h8300
+Available architectures: alpha am33_2.0 arm bfin cris crisv32 frv h8300
hppa hppa64 i386 ia64 m32r m68k mips mips64 or32 powerpc powerpc64 s390x sh4
sparc sparc64 tilegx x86_64 xtensa

@@ -473,7 +466,7 @@ Buildman should now be set up to use your new toolchain.

At the time of writing, U-Boot has these architectures:

- arc, arm, avr32, blackfin, m68k, microblaze, mips, nds32, nios2, openrisc
+ arc, arm, blackfin, m68k, microblaze, mips, nds32, nios2, openrisc
powerpc, sandbox, sh, sparc, x86

Of these, only arc and nds32 are not available at kernel.org..
diff --git a/tools/moveconfig.py b/tools/moveconfig.py
index 95ef352f05..7aa96120a1 100755
--- a/tools/moveconfig.py
+++ b/tools/moveconfig.py
@@ -206,7 +206,6 @@ CROSS_COMPILE = {
'arc': 'arc-linux-',
'aarch64': 'aarch64-linux-',
'arm': 'arm-unknown-linux-gnueabi-',
- 'avr32': 'avr32-linux-',
'm68k': 'm68k-linux-',
'microblaze': 'microblaze-linux-',
'mips': 'mips-linux-',
--
2.11.0