From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Schocher Date: Tue, 12 Sep 2017 09:35:59 +0200 Subject: [U-Boot] [PATCH] cmd: set filesize variable in ubi read In-Reply-To: <59A7B9CE.8060902@denx.de> References: <20170830163852.27454-1-dengler@linutronix.de> <59A7B9CE.8060902@denx.de> Message-ID: <59B78E5F.10302@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Holger, Am 31.08.2017 um 09:25 schrieb Heiko Schocher: > Hello Holger, > > Am 30.08.2017 um 18:38 schrieb Holger Dengler: >> After a successful read of a UBI volume, the variable filesize is set >> to the number of read bytes. To boot linux with a raw initramfs/initrd, >> you must specify the exact size of the initramfs/initrd image in boot >> command. If the initramfs/inird is read from UBI volume, $filesize is >> required to access the number of read bytes. >> >> Example: >> ubi read ${loadaddr} kernelvol >> ubi read ${fdtaddr} dtbvol >> ubi read ${initrd_addr} initrdvol >> bootz ${loadaddr} ${initrd_addr}:${filesize} ${fdt_addr} >> >> Signed-off-by: Holger Dengler >> --- >> cmd/ubi.c | 5 +++++ >> 1 file changed, 5 insertions(+) > > Thanks! > > Reviewed-by: Heiko Schocher > > As new release is near, I pickup this patch when the next merge window > opens. Just tried a travis build, and it breaks a lot of boards, see https://travis-ci.org/hsdenx/u-boot-ubi/builds/274457374 Do you have time to look into? bye, Heiko -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: hs at denx.de