From mboxrd@z Thu Jan  1 00:00:00 1970
From: Heiko Schocher <hs@denx.de>
Date: Fri, 15 Sep 2017 07:49:14 +0200
Subject: [U-Boot] [PATCH v1] cmd: set filesize variable in ubi read
In-Reply-To: <20170912075825.5849-1-dengler@linutronix.de>
References: <20170830163852.27454-1-dengler@linutronix.de>
 <20170912075825.5849-1-dengler@linutronix.de>
Message-ID: <59BB69DA.5090004@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hello Holger,

Am 12.09.2017 um 09:58 schrieb Holger Dengler:
> After a successful read of a UBI volume, the variable filesize is set
> to the number of read bytes. To boot linux with a raw initramfs/initrd,
> you must specify the exact size of the initramfs/initrd image in boot
> command. If the initramfs/inird is read from UBI volume, $filesize is
> required to access the number of read bytes.
>
> Example:
>    ubi read ${loadaddr} kernelvol
>    ubi read ${fdtaddr} dtbvol
>    ubi read ${initrd_addr} initrdvol
>    bootz ${loadaddr} ${initrd_addr}:${filesize} ${fdt_addr}
>
> Signed-off-by: Holger Dengler <dengler@linutronix.de>
> ---
>   cmd/ubi.c | 5 +++++
>   1 file changed, 5 insertions(+)

Applied to u-boot-ubi.git

Thanks!

bye,
Heiko
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: hs at denx.de