From mboxrd@z Thu Jan  1 00:00:00 1970
From: Nikolai Zhubr <n-a-zhubr@yandex.ru>
Date: Mon, 24 Dec 2018 01:04:04 +0300
Subject: [U-Boot] A20-olinuxino-micro hangs in U-boot if powered from
	MINI-USB only.
Message-ID: <5C200654.3050708@yandex.ru>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi all,

I'm observing that the said A20-onlinuxino-micro board hangs in U-boot 
in probing USB2 (see example below) in case it is powered by connecting 
its mini-usb connector to a computer. The problem does not happen if 12V 
power connector is also empoyed. (Note: the example attached below is 
for RC1, but RC2 is no different)
I can't say if such problem was also present in previous version of 
u-boot or not.


Thank you,

Regards,
Nikolai

U-Boot 2019.01-rc1 (Dec 13 2018 - 15:11:11 +0300) Allwinner Technology

CPU:   Allwinner A20 (SUN7I)
Model: Olimex A20-Olinuxino Micro
I2C:   ready
DRAM:  1 GiB
MMC:   SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
Loading Environment from FAT... MMC: no card present
In:    serial
Out:   serial
Err:   serial
Net:   eth0: ethernet at 1c50000
starting USB...
USB0:   USB EHCI 1.00
USB1:   USB OHCI 1.0
USB2: