From mboxrd@z Thu Jan 1 00:00:00 1970 From: Neil Armstrong Date: Thu, 14 Mar 2019 21:13:38 +0100 Subject: [U-Boot] [PATCH v2 3/3] ARM: board: meson: add p200 board In-Reply-To: <20190314170044.4844-4-mohammad.rasim96@gmail.com> References: <20190314170044.4844-1-mohammad.rasim96@gmail.com> <20190314170044.4844-4-mohammad.rasim96@gmail.com> Message-ID: <5C8AB5F2.6080801@baylibre.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: u-boot@lists.denx.de Hi, Le 14/03/2019 18:00, Mohammad Rasim a =C3=A9crit : >=20 > Signed-off-by: Mohammad Rasim > --- > board/amlogic/odroid-c2/README.p200 | 103 ++++++++++++++++++++++++++++ > configs/p200_defconfig | 41 +++++++++++ > 2 files changed, 144 insertions(+) > create mode 100644 board/amlogic/odroid-c2/README.p200 > create mode 100644 configs/p200_defconfig You should also update the MAINTAINERS file in board/amlogic/odroid-c2/ for configs/p200_defconfig Otherwise looks good Neil >=20 > diff --git a/board/amlogic/odroid-c2/README.p200 b/board/amlogic/odroid-c= 2/README.p200 > new file mode 100644 > index 0000000000..01d82d1e79 > --- /dev/null > +++ b/board/amlogic/odroid-c2/README.p200 > @@ -0,0 +1,103 @@ > +U-Boot for Amlogic P200 > +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > + > +P200 is a reference board manufactured by Amlogic with the following > +specifications: > + > + - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 1.5GHz > + - ARM Mali 450 GPU > + - 2GB DDR3 SDRAM > + - Gigabit Ethernet > + - HDMI 2.0 4K/60Hz display > + - 2 x USB 2.0 Host > + - eMMC, microSD > + - Infrared receiver > + - SDIO WiFi Module > + - CVBS+Stereo Audio Jack > + > +Schematics are available from Amlogic on demand. > + > +Currently the u-boot port supports the following devices: > + - serial > + - eMMC, microSD > + - Ethernet > + - I2C > + - Regulators > + - Reset controller > + - Clock controller > + - USB Host > + - ADC > + > +u-boot compilation > +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > + > + > export ARCH=3Darm > + > export CROSS_COMPILE=3Daarch64-none-elf- > + > make p200_defconfig > + > make > + > +Image creation > +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > + > +Amlogic doesn't provide sources for the firmware and for tools needed > +to create the bootloader image, so it is necessary to obtain them from > +the git tree published by the board vendor: > + > + > wget https://releases.linaro.org/archive/13.11/components/toolchain/b= inaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > + > wget https://releases.linaro.org/archive/13.11/components/toolchain/b= inaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > + > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > + > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > + > export PATH=3D$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:= $PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH > + > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlin= ux-20170606 amlogic-u-boot > + > cd amlogic-u-boot > + > make gxb_p200_v1_defconfig > + > make > + > export FIPDIR=3D$PWD/fip > + > +Go back to mainline U-boot source tree then : > + > mkdir fip > + > + > cp $FIPDIR/gxl/bl2.bin fip/ > + > cp $FIPDIR/gxl/acs.bin fip/ > + > cp $FIPDIR/gxl/bl21.bin fip/ > + > cp $FIPDIR/gxl/bl30.bin fip/ > + > cp $FIPDIR/gxl/bl301.bin fip/ > + > cp $FIPDIR/gxl/bl31.img fip/ > + > cp u-boot.bin fip/bl33.bin > + > + > $FIPDIR/blx_fix.sh \ > + fip/bl30.bin \ > + fip/zero_tmp \ > + fip/bl30_zero.bin \ > + fip/bl301.bin \ > + fip/bl301_zero.bin \ > + fip/bl30_new.bin \ > + bl30 > + > + > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 > + > + > $FIPDIR/blx_fix.sh \ > + fip/bl2_acs.bin \ > + fip/zero_tmp \ > + fip/bl2_zero.bin \ > + fip/bl21.bin \ > + fip/bl21_zero.bin \ > + fip/bl2_new.bin \ > + bl2 > + > + > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin > + > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img > + > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin > + > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output= fip/bl2.n.bin.sig > + > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ > + --output fip/u-boot.bin \ > + --bl2 fip/bl2.n.bin.sig \ > + --bl30 fip/bl30_new.bin.enc \ > + --bl31 fip/bl31.img.enc \ > + --bl33 fip/bl33.bin.enc > + > +and then write the image to SD with: > + > + > DEV=3D/dev/your_sd_device > + > dd if=3Dfip/u-boot.bin.sd.bin of=3D$DEV conv=3Dfsync,notrunc bs=3D512= skip=3D1 seek=3D1 > + > dd if=3Dfip/u-boot.bin.sd.bin of=3D$DEV conv=3Dfsync,notrunc bs=3D1 c= ount=3D444 > diff --git a/configs/p200_defconfig b/configs/p200_defconfig > new file mode 100644 > index 0000000000..4011866140 > --- /dev/null > +++ b/configs/p200_defconfig > @@ -0,0 +1,41 @@ > +CONFIG_ARM=3Dy > +CONFIG_ARCH_MESON=3Dy > +CONFIG_SYS_TEXT_BASE=3D0x01000000 > +CONFIG_DEBUG_UART_BASE=3D0xc81004c0 > +CONFIG_DEBUG_UART_CLOCK=3D24000000 > +CONFIG_IDENT_STRING=3D" p200" > +CONFIG_DEBUG_UART=3Dy > +CONFIG_NR_DRAM_BANKS=3D1 > +CONFIG_OF_BOARD_SETUP=3Dy > +CONFIG_MISC_INIT_R=3Dy > +# CONFIG_DISPLAY_CPUINFO is not set > +# CONFIG_DISPLAY_BOARDINFO is not set > +# CONFIG_CMD_BDI is not set > +# CONFIG_CMD_IMI is not set > +CONFIG_CMD_GPIO=3Dy > +CONFIG_CMD_I2C=3Dy > +# CONFIG_CMD_LOADS is not set > +CONFIG_CMD_MMC=3Dy > +# CONFIG_CMD_SETEXPR is not set > +CONFIG_CMD_REGULATOR=3Dy > +CONFIG_OF_CONTROL=3Dy > +CONFIG_DEFAULT_DEVICE_TREE=3D"meson-gxbb-p200" > +CONFIG_NET_RANDOM_ETHADDR=3Dy > +CONFIG_DM_GPIO=3Dy > +CONFIG_DM_I2C=3Dy > +CONFIG_SYS_I2C_MESON=3Dy > +CONFIG_DM_MMC=3Dy > +CONFIG_MMC_MESON_GX=3Dy > +CONFIG_DM_ETH=3Dy > +CONFIG_ETH_DESIGNWARE=3Dy > +CONFIG_PINCTRL=3Dy > +CONFIG_PINCTRL_MESON_GXBB=3Dy > +CONFIG_DM_REGULATOR=3Dy > +CONFIG_DM_REGULATOR_FIXED=3Dy > +CONFIG_DM_RESET=3Dy > +CONFIG_DEBUG_UART_MESON=3Dy > +CONFIG_DEBUG_UART_ANNOUNCE=3Dy > +CONFIG_DEBUG_UART_SKIP_INIT=3Dy > +CONFIG_MESON_SERIAL=3Dy > +CONFIG_OF_LIBFDT_OVERLAY=3Dy > +CONFIG_SYS_BOARD=3D"odroid-c2" > -- > 2.21.0 >=20