[U-Boot] [PATCH v4 4/5] ARM: board: meson: add p200 board

[Neil Armstrong <narmstrong@baylibre.com>]

Hi,

Le 15/03/2019 16:19, Mohammad Rasim a écrit :
> This adds the p200 defconfig
> 
> Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com>
> ---
>  configs/p200_defconfig | 41 +++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
>  create mode 100644 configs/p200_defconfig
> 
> diff --git a/configs/p200_defconfig b/configs/p200_defconfig
> new file mode 100644
> index 000000000000..3980e4eb5f1d
> --- /dev/null
> +++ b/configs/p200_defconfig
> @@ -0,0 +1,41 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_MESON=y
> +CONFIG_SYS_TEXT_BASE=0x01000000
> +CONFIG_DEBUG_UART_BASE=0xc81004c0
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_IDENT_STRING=" p200"
> +CONFIG_DEBUG_UART=y
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_OF_BOARD_SETUP=y
> +CONFIG_MISC_INIT_R=y
> +# CONFIG_DISPLAY_CPUINFO is not set
> +# CONFIG_DISPLAY_BOARDINFO is not set
> +# CONFIG_CMD_BDI is not set
> +# CONFIG_CMD_IMI is not set
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_I2C=y
> +# CONFIG_CMD_LOADS is not set
> +CONFIG_CMD_MMC=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_REGULATOR=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="meson-gxbb-p200"
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_DM_GPIO=y
> +CONFIG_DM_I2C=y
> +CONFIG_SYS_I2C_MESON=y
> +CONFIG_DM_MMC=y
> +CONFIG_MMC_MESON_GX=y
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_PINCTRL=y
> +CONFIG_PINCTRL_MESON_GXBB=y
> +CONFIG_DM_REGULATOR=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_DM_RESET=y
> +CONFIG_DEBUG_UART_MESON=y
> +CONFIG_DEBUG_UART_ANNOUNCE=y
> +CONFIG_DEBUG_UART_SKIP_INIT=y
> +CONFIG_MESON_SERIAL=y
> +CONFIG_OF_LIBFDT_OVERLAY=y
> +CONFIG_SYS_BOARD="p200"
> --
> 2.21.0
> 

Can you update the configs/p200_defconfig here instead of the first patch ?

Thanks,
Neil