[U-Boot] [PATCH v1 3/4] ARM: vf610: ddrmc: fix initialization completion detection

[Stefan Agner <stefan@agner.ch>]

On 04.12.2018 11:59, Lukasz Majewski wrote:
> Hi Stefan,
> 
>> From: Stefan Agner <stefan.agner@toradex.com>
>>
>> The CR80 register has multiple interrupt bits, the code is supposed
>> to check bit 8 but instead uses a logical and. In most cases this
>> probably did not affect real operations since at that stage typically
>> none of the other bits are set.
> 
> It can exit the loop when any error bit is set (but anyway with broken
> DDR initialization we hang latter anyway).
> 
>>
>> Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
>> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>> ---
>>
>>  arch/arm/include/asm/arch-vf610/imx-regs.h | 3 ++-
>>  arch/arm/mach-imx/ddrmc-vf610.c            | 3 ++-
>>  2 files changed, 4 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/include/asm/arch-vf610/imx-regs.h
>> b/arch/arm/include/asm/arch-vf610/imx-regs.h index
>> b7374bfb8f..f71fbf4e73 100644 ---
>> a/arch/arm/include/asm/arch-vf610/imx-regs.h +++
>> b/arch/arm/include/asm/arch-vf610/imx-regs.h @@ -200,7 +200,8 @@
>>  #define DDRMC_CR78_Q_FULLNESS(v)			(((v) & 0x7)
>> << 24) #define DDRMC_CR78_BUR_ON_FLY_BIT(v)
>> ((v) & 0xf) #define DDRMC_CR79_CTLUPD_AREF(v)
>> (((v) & 0x1) << 24) -#define
>> DDRMC_CR82_INT_MASK				0x10000000
>> +#define DDRMC_CR80_MC_INIT_COMPLETE			(1 << 8)
>> +#define DDRMC_CR82_INT_MASK				(1 << 28)
> 
> When I was working on my code - the checkpatch.pl was complaining about
> (1 << x) code. It was recommended to use BIT(x) instead.
> 

Yeah I noticed that too, but arch/arm/include/asm/arch-vf610/imx-regs.h
does use bit shifting so far. I rated consistency higher than the new
recommendation :-)

--
Stefan

>> #define DDRMC_CR87_ODT_WR_MAPCS0(v)			((v) <<
>> 24) #define DDRMC_CR87_ODT_RD_MAPCS0(v)			((v)
>> << 16) #define DDRMC_CR88_TODTL_CMD(v)
>> (((v) & 0x1f) << 16) diff --git a/arch/arm/mach-imx/ddrmc-vf610.c
>> b/arch/arm/mach-imx/ddrmc-vf610.c index 3d7da1c25e..d121a53898 100644
>> --- a/arch/arm/mach-imx/ddrmc-vf610.c +++
>> b/arch/arm/mach-imx/ddrmc-vf610.c @@ -231,6 +231,7 @@ void
>> ddrmc_ctrl_init_ddr3(struct ddr3_jedec_timings const *timings, /* all
>> inits done, start the DDR controller */
>> writel(DDRMC_CR00_DRAM_CLASS_DDR3 | DDRMC_CR00_START, &ddrmr->cr[0]);
>> -	while (!(readl(&ddrmr->cr[80]) && 0x100))
>> +	while (!(readl(&ddrmr->cr[80]) &
>> DDRMC_CR80_MC_INIT_COMPLETE)) udelay(10);
>> +	writel(DDRMC_CR80_MC_INIT_COMPLETE, &ddrmr->cr[81]);
>>  }
> 
> 
> 
> 
> Best regards,
> 
> Lukasz Majewski
> 
> --
> 
> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de