[PATCHv2 8/8] configs: Drop '$(ARCH)' usage in CONFIG_SPL_LDSCRIPT

Tom Rini
2020-03-11T22:11:18Z

In a few boards we had overridden, intentionally, the value used for
CONFIG_SPL_LDSCRIPT. However, rather than using the ARCH value (arm)
they used the $(ARCH) variable in make. This doesn't help really, so
switch to a hard-coded value.

Signed-off-by: Tom Rini <trini@konsulko.com>
---
Changes in v2:
- New patch
---
configs/axm_defconfig | 2 +-
configs/brppt2_defconfig | 2 +-
configs/taurus_defconfig | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/configs/axm_defconfig b/configs/axm_defconfig
index 57683b183fc2..1ae78463d457 100644
--- a/configs/axm_defconfig
+++ b/configs/axm_defconfig
@@ -5,7 +5,7 @@ CONFIG_SYS_THUMB_BUILD=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARCH_AT91=y
-CONFIG_SPL_LDSCRIPT="arch/$(ARCH)/cpu/u-boot-spl.lds"
+CONFIG_SPL_LDSCRIPT="arch/arm/cpu/u-boot-spl.lds"
CONFIG_SYS_TEXT_BASE=0x21000000
CONFIG_TARGET_TAURUS=y
CONFIG_SPL_GPIO_SUPPORT=y
diff --git a/configs/brppt2_defconfig b/configs/brppt2_defconfig
index f94ea2837650..4fde3b963c3c 100644
--- a/configs/brppt2_defconfig
+++ b/configs/brppt2_defconfig
@@ -2,7 +2,7 @@ CONFIG_ARM=y
# CONFIG_SPL_SYS_THUMB_BUILD is not set
CONFIG_SYS_L2CACHE_OFF=y
CONFIG_ARCH_MX6=y
-CONFIG_SPL_LDSCRIPT="arch/$(ARCH)/cpu/u-boot-spl.lds"
+CONFIG_SPL_LDSCRIPT="arch/arm/cpu/u-boot-spl.lds"
CONFIG_SYS_TEXT_BASE=0x17800000
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig
index 0399132230a0..19d85f9b5a81 100644
--- a/configs/taurus_defconfig
+++ b/configs/taurus_defconfig
@@ -6,7 +6,7 @@ CONFIG_SYS_THUMB_BUILD=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARCH_AT91=y
-CONFIG_SPL_LDSCRIPT="arch/$(ARCH)/cpu/u-boot-spl.lds"
+CONFIG_SPL_LDSCRIPT="arch/arm/cpu/u-boot-spl.lds"
CONFIG_SYS_TEXT_BASE=0x21000000
CONFIG_TARGET_TAURUS=y
CONFIG_BOARD_TAURUS=y
--
2.17.1