* [U-Boot] i.MX6UL Secure Boot Problem
@ 2019-10-21 19:15 Emre Karaaslan
0 siblings, 0 replies; only message in thread
From: Emre Karaaslan @ 2019-10-21 19:15 UTC (permalink / raw)
To: u-boot
Hello and good work.
I am trying to make my i.MX6UL board secure. I'm using the Yocto "sumo" distribution, and I have a few questions before moving on to signing images with HAB.
First, I implemented an open source secure software update (OTA) solution called mender.io on my board. Mender splits the boot loader into 4 parts. It consists of 4 parts: there is one boot, two rootfs and one data partition. "Core-image-minimal" was used as the target image and a file named "u-boot-spl.img" consists of .img files after bitbake. Mender uses this file as bootloader. So actually we need to sign separately SPL and u-boot but When mender is used, SPL and uboot are used as a single bootloader.. Then can I sign u-boot-spl.img instead of signing separately? Is it possible to implement HAB in this way?
The image that I downloaded shows the result of bitbake.
I want to implement HAB when working with Mender. How should I proceed? I'd appreciate it if you helped.
Thank you.
Windows 10 için Posta ile gönderildi
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2019-10-21 19:15 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-10-21 19:15 [U-Boot] i.MX6UL Secure Boot Problem Emre Karaaslan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox