From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?utf-8?Q?Beno=C3=AEt_Th=C3=A9baudeau?= Date: Fri, 10 Aug 2012 20:43:22 +0200 (CEST) Subject: [U-Boot] [PATCH v4 4/7] usb_storage: Remove EHCI constraints In-Reply-To: Message-ID: <608964076.2281855.1344624202187.JavaMail.root@advansee.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Ilya, On Fri, Aug 10, 2012 at 8:34:14 PM, Ilya Yanok wrote: > Hi Benoit, > On Fri, Aug 10, 2012 at 8:23 PM, Beno?t Th?baudeau < > benoit.thebaudeau at advansee.com > wrote: > > diff --git u-boot-usb-4f8254e.orig/common/usb_storage.c > > u-boot-usb-4f8254e/common/usb_storage.c > > > index 0cd6399..822bd64 100644 > > > --- u-boot-usb-4f8254e.orig/common/usb_storage.c > > > +++ u-boot-usb-4f8254e/common/usb_storage.c > > > @@ -157,12 +157,13 @@ struct us_data { > > > #ifdef CONFIG_USB_EHCI > > > /* > > > - * The U-Boot EHCI driver cannot handle more than 5 page aligned > > buffers > > > - * of 4096 bytes in a transfer without running itself out of > > qt_buffers > > > + * The U-Boot EHCI driver can handle any transfer length as long > > as > > there is > > > + * enough free heap space left, but the SCSI READ(10) and > > WRITE(10) > > commands are > > > + * limited to 65535 bytes. > > bytes? > > */ > > > -#define USB_MAX_XFER_BLK(start, blksz) (((4096 * 5) - (start % > > 4096)) / blksz) > > > +#define USB_MAX_XFER_BLK 65535 > > But here you limit it to 65535 _blocks_, right? One of the two should > be wrong ;) Argh, it was a typo in the comment. Thanks for catching this. I meant "blocks" of course. Marek, can you fix this comment on-the-fly when applying? Best regards, Beno?t