From: Igor Prusov <prusovigor@gmail.com>
To: Michal Simek <michal.simek@amd.com>
Cc: Igor Prusov <ivprusov@sberdevices.ru>,
Daniel Schwierzeck <daniel.schwierzeck@gmail.com>,
Lukasz Majewski <lukma@denx.de>,
Sean Anderson <seanga2@gmail.com>,
Ryan Chen <ryan_chen@aspeedtech.com>,
Chia-Wei Wang <chiawei_wang@aspeedtech.com>,
Aspeed BMC SW team <BMC-SW@aspeedtech.com>,
Joel Stanley <joel@jms.id.au>, Stefan Roese <sr@denx.de>,
Patrick Delaunay <patrick.delaunay@foss.st.com>,
Patrice Chotard <patrice.chotard@foss.st.com>,
kernel@sberdevices.ru, u-boot@lists.denx.de,
uboot-stm32@st-md-mailman.stormreply.com
Subject: Re: [RFC PATCH v1 6/7] clk: treewide: switch to clock dump from clk_ops
Date: Tue, 2 May 2023 21:40:56 +0300 [thread overview]
Message-ID: <6451593a.c20a0220.2fb7d.0870@mx.google.com> (raw)
In-Reply-To: <6b4101b8-c047-b8aa-e54b-e8eee03fa2fc@amd.com>
Hello Michal,
On Tue, May 02, 2023 at 04:02:00PM +0200, Michal Simek wrote:
>
>
> On 4/27/23 22:37, Igor Prusov wrote:
> > Switch to using new dump operation in clock provider drivers instead of
> > overriding soc_clk_dump.
> >
> > Signed-off-by: Igor Prusov <ivprusov@sberdevices.ru>
> > ---
> > arch/mips/mach-pic32/cpu.c | 23 ---------------
> > drivers/clk/aspeed/clk_ast2600.c | 13 ++++-----
> > drivers/clk/clk_k210.c | 11 +++-----
> > drivers/clk/clk_pic32.c | 39 ++++++++++++++++++++++++++
> > drivers/clk/clk_versal.c | 7 ++++-
> > drivers/clk/clk_zynq.c | 19 ++++---------
> > drivers/clk/clk_zynqmp.c | 13 ++++-----
> > drivers/clk/imx/clk-imx8.c | 11 +++-----
> > drivers/clk/mvebu/armada-37xx-periph.c | 5 +++-
> > drivers/clk/stm32/clk-stm32mp1.c | 29 ++++++-------------
> > 10 files changed, 83 insertions(+), 87 deletions(-)
> >
> > diff --git a/arch/mips/mach-pic32/cpu.c b/arch/mips/mach-pic32/cpu.c
> > index de449e3c6a..2875a1ec7c 100644
> > --- a/arch/mips/mach-pic32/cpu.c
> > +++ b/arch/mips/mach-pic32/cpu.c
> > @@ -148,26 +148,3 @@ const char *get_core_name(void)
> > return str;
> > }
> > #endif
> > -#ifdef CONFIG_CMD_CLK
> > -
> > -int soc_clk_dump(void)
> > -{
> > - int i;
> > -
> > - printf("PLL Speed: %lu MHz\n",
> > - CLK_MHZ(rate(PLLCLK)));
> > -
> > - printf("CPU Speed: %lu MHz\n", CLK_MHZ(rate(PB7CLK)));
> > -
> > - printf("MPLL Speed: %lu MHz\n", CLK_MHZ(rate(MPLL)));
> > -
> > - for (i = PB1CLK; i <= PB7CLK; i++)
> > - printf("PB%d Clock Speed: %lu MHz\n", i - PB1CLK + 1,
> > - CLK_MHZ(rate(i)));
> > -
> > - for (i = REF1CLK; i <= REF5CLK; i++)
> > - printf("REFO%d Clock Speed: %lu MHz\n", i - REF1CLK + 1,
> > - CLK_MHZ(rate(i)));
> > - return 0;
> > -}
> > -#endif
> > diff --git a/drivers/clk/aspeed/clk_ast2600.c b/drivers/clk/aspeed/clk_ast2600.c
> > index b3cc8392fa..08db21d394 100644
> > --- a/drivers/clk/aspeed/clk_ast2600.c
> > +++ b/drivers/clk/aspeed/clk_ast2600.c
> > @@ -1109,6 +1109,7 @@ struct aspeed_clks {
> > const char *name;
> > };
> > +#if IS_ENABLED(CONFIG_CMD_CLK)
> > static struct aspeed_clks aspeed_clk_names[] = {
> > { ASPEED_CLK_HPLL, "hpll" },
> > { ASPEED_CLK_MPLL, "mpll" },
> > @@ -1123,18 +1124,12 @@ static struct aspeed_clks aspeed_clk_names[] = {
> > { ASPEED_CLK_HUARTX, "huxclk" },
> > };
> > -int soc_clk_dump(void)
> > +int ast2600_clk_dump(struct udevice *dev)
>
> static? apply for all below too.
Indeed, will fix in v2, thanks!
>
> M
--
Best Regards,
Igor Prusov
next prev parent reply other threads:[~2023-05-02 19:22 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-27 20:37 [RFC PATCH v1 0/7] clk: Switch from soc_clk_dump to clk_ops function Igor Prusov
2023-04-27 20:37 ` [RFC PATCH v1 1/7] clk: zynq: Move soc_clk_dump to Zynq clock driver Igor Prusov
2023-04-27 20:37 ` [RFC PATCH v1 2/7] clk: ast2600: Move soc_clk_dump function Igor Prusov
2023-04-27 20:37 ` [RFC PATCH v1 3/7] clk: k210: " Igor Prusov
2023-04-27 20:37 ` [RFC PATCH v1 4/7] clk: Add dump operation to clk_ops Igor Prusov
2023-04-27 20:37 ` [RFC PATCH v1 5/7] cmd: clk: Use dump function from clk_ops Igor Prusov
2023-04-27 20:37 ` [RFC PATCH v1 6/7] clk: treewide: switch to clock dump " Igor Prusov
2023-05-02 14:02 ` Michal Simek
2023-05-02 18:40 ` Igor Prusov [this message]
2023-04-27 20:37 ` [RFC PATCH v1 7/7] cmd: clk: Remove __weak from soc_clk_dump Igor Prusov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6451593a.c20a0220.2fb7d.0870@mx.google.com \
--to=prusovigor@gmail.com \
--cc=BMC-SW@aspeedtech.com \
--cc=chiawei_wang@aspeedtech.com \
--cc=daniel.schwierzeck@gmail.com \
--cc=ivprusov@sberdevices.ru \
--cc=joel@jms.id.au \
--cc=kernel@sberdevices.ru \
--cc=lukma@denx.de \
--cc=michal.simek@amd.com \
--cc=patrice.chotard@foss.st.com \
--cc=patrick.delaunay@foss.st.com \
--cc=ryan_chen@aspeedtech.com \
--cc=seanga2@gmail.com \
--cc=sr@denx.de \
--cc=u-boot@lists.denx.de \
--cc=uboot-stm32@st-md-mailman.stormreply.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox