From: Lokesh Vutla <lokeshvutla@ti.com>
To: u-boot@lists.denx.de
Subject: [PATCH v2 12/18] board: ti: j7200: Introduce support for j7200 build targets
Date: Wed, 5 Aug 2020 19:30:47 +0530 [thread overview]
Message-ID: <6c0558c3-83c0-ddfc-e558-af3ddd3d253a@ti.com> (raw)
In-Reply-To: <6138f60e-6a60-e648-7b82-a0eb4e9ca124@ti.com>
On 05/08/20 2:20 pm, Vignesh Raghavendra wrote:
> Hi
>
> On 27/07/20 3:15 pm, Lokesh Vutla wrote:
>> j7200-evm has minor differences with j721e-evm based on the IPs
>> available in the SoC. Introduce separate build targets for j7200-evm
>> to incorporate the differences.
>>
>> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
>> ---
>> board/ti/j721e/Kconfig | 53 ++++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 53 insertions(+)
>>
>> diff --git a/board/ti/j721e/Kconfig b/board/ti/j721e/Kconfig
>> index e56dc53bfa..2cbe2b2481 100644
>> --- a/board/ti/j721e/Kconfig
>> +++ b/board/ti/j721e/Kconfig
>> @@ -27,6 +27,26 @@ config TARGET_J721E_R5_EVM
>> imply SYS_K3_SPL_ATF
>> imply TI_I2C_BOARD_DETECT
>>
>> +config TARGET_J7200_A72_EVM
>> + bool "TI K3 based J7200 EVM running on A72"
>> + select ARM64
>> + select SOC_K3_J721E
>> + select BOARD_LATE_INIT
>> + imply TI_I2C_BOARD_DETECT
>> + select SYS_DISABLE_DCACHE_OPS
>> +
>
> I don't see update to:
>
> include/configs/j721e_evm.h 23 #ifdef CONFIG_TARGET_J721E_A72_EVM
> include/configs/j721e_evm.h 130 #ifdef CONFIG_TARGET_J721E_A72_EVM
>
> Don't we need to update j721e_evm.h with TARGET_J7200_A72_EVM?
You are right. Will fix in v2.
Thanks and regards,
Lokesh
next prev parent reply other threads:[~2020-08-05 14:00 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-27 9:45 [PATCH v2 00/18] arm: mach-k3: Initial support for Texas Instrument's J7200 Platform Lokesh Vutla
2020-07-27 9:45 ` [PATCH v2 01/18] board: ti: board_detect: Add stub functions for EEPROM detection apis Lokesh Vutla
2020-07-27 9:45 ` [PATCH v2 02/18] board: ti: j721e: Probe eeprom only when CONFIG_TI_I2C_BOARD_DETECT is defined Lokesh Vutla
2020-07-27 9:45 ` [PATCH v2 03/18] board: ti: j721e: Update fdt fixup logic for interconnect nodes Lokesh Vutla
2020-07-27 9:45 ` [PATCH v2 04/18] arm: mach-k3: Fix platform hang when SPL_MULTI_DTB_FIT is not enabled Lokesh Vutla
2020-07-27 9:45 ` [PATCH v2 05/18] arm: mach-k3: Move mmr_unlock to a common location Lokesh Vutla
2020-07-27 17:12 ` Suman Anna
2020-07-27 9:45 ` [PATCH v2 06/18] arm: mach-k3: sysfw-loader: Add support for rom loading sysfw image Lokesh Vutla
2020-07-27 17:17 ` Suman Anna
2020-07-29 2:35 ` Lokesh Vutla
2020-07-27 9:45 ` [PATCH v2 07/18] arm: mach-k3: j721e: Add detection for j721e Lokesh Vutla
2020-07-27 9:45 ` [PATCH v2 08/18] arm: mach-k3: j721e: Fix unlocking control module registers Lokesh Vutla
2020-07-27 17:19 ` Suman Anna
2020-07-27 9:45 ` [PATCH v2 09/18] arm: mach-k3: j7200: Add support for SOC detection Lokesh Vutla
2020-07-27 9:45 ` [PATCH v2 10/18] arm: mach-k3: j7200: Add support for storing extended boot info from ROM Lokesh Vutla
2020-07-27 17:34 ` Suman Anna
2020-07-27 9:45 ` [PATCH v2 11/18] arm: mach-k3: j7200: Detect if ROM has already loaded sysfw Lokesh Vutla
2020-07-27 17:36 ` Suman Anna
2020-07-27 9:45 ` [PATCH v2 12/18] board: ti: j7200: Introduce support for j7200 build targets Lokesh Vutla
2020-08-05 8:50 ` Vignesh Raghavendra
2020-08-05 14:00 ` Lokesh Vutla [this message]
2020-07-27 9:45 ` [PATCH v2 13/18] board: ti: j7200: Add board detection support for j7200 Lokesh Vutla
2020-07-27 17:38 ` Suman Anna
2020-07-27 9:45 ` [PATCH v2 14/18] ram: k3-j721e: Relax version checks for memory controller Lokesh Vutla
2020-07-27 9:45 ` [PATCH v2 15/18] arm: dts: k3-j7200: Add dts support Lokesh Vutla
2020-08-04 14:11 ` Vignesh Raghavendra
2020-07-27 9:45 ` [PATCH v2 16/18] arm: dts: k3-j7200: Add R5 specific " Lokesh Vutla
2020-07-27 9:45 ` [PATCH v2 17/18] configs: j7200_evm_r5: Add initial support Lokesh Vutla
2020-07-27 9:45 ` [PATCH v2 18/18] configs: j7200_evm_a72: Add Initial support Lokesh Vutla
2020-08-04 15:25 ` Vignesh Raghavendra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6c0558c3-83c0-ddfc-e558-af3ddd3d253a@ti.com \
--to=lokeshvutla@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox