From: "Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] part_mac: dcache: allocate cacheline-aligned buffers
Date: Sat, 4 Aug 2012 01:05:03 +0200 (CEST) [thread overview]
Message-ID: <702522317.1091303.1344035103823.JavaMail.root@advansee.com> (raw)
In-Reply-To: <1167777613.1339389.1342207863387.JavaMail.root@advansee.com>
On Fri, Jul 13, 2012 at 09:31:03 PM, Beno?t Th?baudeau wrote:
> This patch forces the correct alignment for DMA operations of buffers
> used by
> part_mac.c.
>
> Signed-off-by: Beno?t Th?baudeau <benoit.thebaudeau@advansee.com>
> Cc: Wolfgang Denk <wd@denx.de>
> ---
> {u-boot.orig => u-boot}/disk/part_mac.c | 68
> +++++++++++++++----------------
> 1 file changed, 34 insertions(+), 34 deletions(-)
>
> diff --git u-boot.orig/disk/part_mac.c u-boot/disk/part_mac.c
> index c1afc8c..cb443ac 100644
> --- u-boot.orig/disk/part_mac.c
> +++ u-boot/disk/part_mac.c
> @@ -60,23 +60,23 @@ static int part_mac_read_pdb (block_dev_desc_t
> *dev_desc, int part, mac_partitio
> */
> int test_part_mac (block_dev_desc_t *dev_desc)
> {
> - mac_driver_desc_t ddesc;
> - mac_partition_t mpart;
> + ALLOC_CACHE_ALIGN_BUFFER(mac_driver_desc_t, ddesc, 1);
> + ALLOC_CACHE_ALIGN_BUFFER(mac_partition_t, mpart, 1);
> ulong i, n;
>
> - if (part_mac_read_ddb (dev_desc, &ddesc)) {
> + if (part_mac_read_ddb (dev_desc, ddesc)) {
> /* error reading Driver Desriptor Block, or no valid Signature */
> return (-1);
> }
>
> n = 1; /* assuming at least one partition */
> for (i=1; i<=n; ++i) {
> - if ((dev_desc->block_read(dev_desc->dev, i, 1, (ulong *)&mpart) !=
> 1) ||
> - (mpart.signature != MAC_PARTITION_MAGIC) ) {
> + if ((dev_desc->block_read(dev_desc->dev, i, 1, (ulong *)mpart) !=
> 1) ||
> + (mpart->signature != MAC_PARTITION_MAGIC) ) {
> return (-1);
> }
> /* update partition count */
> - n = mpart.map_count;
> + n = mpart->map_count;
> }
> return (0);
> }
> @@ -85,20 +85,20 @@ int test_part_mac (block_dev_desc_t *dev_desc)
> void print_part_mac (block_dev_desc_t *dev_desc)
> {
> ulong i, n;
> - mac_driver_desc_t ddesc;
> - mac_partition_t mpart;
> + ALLOC_CACHE_ALIGN_BUFFER(mac_driver_desc_t, ddesc, 1);
> + ALLOC_CACHE_ALIGN_BUFFER(mac_partition_t, mpart, 1);
> ldiv_t mb, gb;
>
> - if (part_mac_read_ddb (dev_desc, &ddesc)) {
> + if (part_mac_read_ddb (dev_desc, ddesc)) {
> /* error reading Driver Desriptor Block, or no valid Signature */
> return;
> }
>
> - n = ddesc.blk_count;
> + n = ddesc->blk_count;
>
> - mb = ldiv(n, ((1024 * 1024) / ddesc.blk_size)); /* MB */
> + mb = ldiv(n, ((1024 * 1024) / ddesc->blk_size)); /* MB */
> /* round to 1 digit */
> - mb.rem *= 10 * ddesc.blk_size;
> + mb.rem *= 10 * ddesc->blk_size;
> mb.rem += 512 * 1024;
> mb.rem /= 1024 * 1024;
>
> @@ -112,10 +112,10 @@ void print_part_mac (block_dev_desc_t
> *dev_desc)
> "DeviceType=0x%x, DeviceId=0x%x\n\n"
> " #: type name"
> " length base (size)\n",
> - ddesc.blk_size,
> - ddesc.blk_count,
> + ddesc->blk_size,
> + ddesc->blk_count,
> mb.quot, mb.rem, gb.quot, gb.rem,
> - ddesc.dev_type, ddesc.dev_id
> + ddesc->dev_type, ddesc->dev_id
> );
>
> n = 1; /* assuming at least one partition */
> @@ -124,25 +124,25 @@ void print_part_mac (block_dev_desc_t
> *dev_desc)
> char c;
>
> printf ("%4ld: ", i);
> - if (dev_desc->block_read (dev_desc->dev, i, 1, (ulong *)&mpart) !=
> 1) {
> + if (dev_desc->block_read (dev_desc->dev, i, 1, (ulong *)mpart) !=
> 1) {
> printf ("** Can't read Partition Map on %d:%ld **\n",
> dev_desc->dev, i);
> return;
> }
>
> - if (mpart.signature != MAC_PARTITION_MAGIC) {
> + if (mpart->signature != MAC_PARTITION_MAGIC) {
> printf ("** Bad Signature on %d:%ld - "
> "expected 0x%04x, got 0x%04x\n",
> - dev_desc->dev, i, MAC_PARTITION_MAGIC, mpart.signature);
> + dev_desc->dev, i, MAC_PARTITION_MAGIC, mpart->signature);
> return;
> }
>
> /* update partition count */
> - n = mpart.map_count;
> + n = mpart->map_count;
>
> c = 'k';
> - bytes = mpart.block_count;
> - bytes /= (1024 / ddesc.blk_size); /* kB; assumes blk_size == 512
> */
> + bytes = mpart->block_count;
> + bytes /= (1024 / ddesc->blk_size); /* kB; assumes blk_size == 512
> */
> if (bytes >= 1024) {
> bytes >>= 10;
> c = 'M';
> @@ -153,10 +153,10 @@ void print_part_mac (block_dev_desc_t
> *dev_desc)
> }
>
> printf ("%20.32s %-18.32s %10u @ %-10u (%3ld%c)\n",
> - mpart.type,
> - mpart.name,
> - mpart.block_count,
> - mpart.start_block,
> + mpart->type,
> + mpart->name,
> + mpart->block_count,
> + mpart->start_block,
> bytes, c
> );
> }
> @@ -231,23 +231,23 @@ static int part_mac_read_pdb (block_dev_desc_t
> *dev_desc, int part, mac_partitio
>
> int get_partition_info_mac (block_dev_desc_t *dev_desc, int part,
> disk_partition_t *info)
> {
> - mac_driver_desc_t ddesc;
> - mac_partition_t mpart;
> + ALLOC_CACHE_ALIGN_BUFFER(mac_driver_desc_t, ddesc, 1);
> + ALLOC_CACHE_ALIGN_BUFFER(mac_partition_t, mpart, 1);
>
> - if (part_mac_read_ddb (dev_desc, &ddesc)) {
> + if (part_mac_read_ddb (dev_desc, ddesc)) {
> return (-1);
> }
>
> - info->blksz = ddesc.blk_size;
> + info->blksz = ddesc->blk_size;
>
> - if (part_mac_read_pdb (dev_desc, part, &mpart)) {
> + if (part_mac_read_pdb (dev_desc, part, mpart)) {
> return (-1);
> }
>
> - info->start = mpart.start_block;
> - info->size = mpart.block_count;
> - memcpy (info->type, mpart.type, sizeof(info->type));
> - memcpy (info->name, mpart.name, sizeof(info->name));
> + info->start = mpart->start_block;
> + info->size = mpart->block_count;
> + memcpy (info->type, mpart->type, sizeof(info->type));
> + memcpy (info->name, mpart->name, sizeof(info->name));
>
> return (0);
> }
>
Ping?
Beno?t
next prev parent reply other threads:[~2012-08-03 23:05 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-13 19:31 [U-Boot] [PATCH] part_mac: dcache: allocate cacheline-aligned buffers Benoît Thébaudeau
2012-08-03 23:05 ` Benoît Thébaudeau [this message]
2012-08-10 14:39 ` Benoît Thébaudeau
2012-09-02 15:08 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=702522317.1091303.1344035103823.JavaMail.root@advansee.com \
--to=benoit.thebaudeau@advansee.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox