From: Ada Wu <musicguitar17@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] A problem with u-boot on smdk2410 used nand flash(smart media card)
Date: Tue, 21 Dec 2004 13:09:24 +0800 [thread overview]
Message-ID: <70882d0604122021091dc76868@mail.gmail.com> (raw)
Hi all,
I have a problem with u-boot on smdk2410, i used a nand flash(smart media card).
I had make an "u-boot.bin " image, and download with jtag to the nand
flash. But, that was no any out put signal on the screen.
I just used the "make smdk2410_config", but I didn't change any file.
After that method failed. Then i thought, how can I enable the nand flash?
So I added some things in "smdk2410.h", which are
CONFIG_COMMANDS \
(CONFIG_CMD_DFL | \
CFG_CMD_CACHE | \
CFG_CMD_NAND | \
CFG_CMD_REGINFO | \
CFG_CMD_DATE | \
CFG_CMD_ELF)
Is that a correct direction to boot on nand flash?
I assume that is a correct direction, but that is some error with compiling.
Such constants or marcos are not defined:
#define SECTORSIZE 512
#define ADDR_COLUMN 1
#define ADDR_PAGE 2
#define ADDR_COLUMN_PAGE 3
#define NAND_ChipID_UNKNOWN 0x00
#define NAND_MAX_FLOORS 1
#define NAND_MAX_CHIPS 1
#define NAND_WAIT_READY(nand)
#define WRITE_NAND_COMMAND(d, adr)
#define READ_NAND(adr)
..............................etc....
Where can I find the header file for smdk2410 with nand flash?
or How can i find make such definition for nand flash? and where
should i add such definition?
Thanks!!
next reply other threads:[~2004-12-21 5:09 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-12-21 5:09 Ada Wu [this message]
2004-12-21 9:25 ` [U-Boot-Users] A problem with u-boot on smdk2410 used nand flash(smart media card) Wolfgang Denk
2004-12-24 18:46 ` Ada Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=70882d0604122021091dc76868@mail.gmail.com \
--to=musicguitar17@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox