[PATCH v1 0/1] arm: Add support for SoC S5P4418

[Stefan Bosch <stefan_b@posteo.net>]

Hi Lukasz,

On 07.01.2020 11:57, Lukasz Majewski wrote:
> Hi Stefan,
> 
>> This patch adds support for SAMSUNG's ARM Cortex-A9 based S5P4418
>> SoC, especially FriendlyARM's NanoPi2 and NanoPC-T2 boards. It is
>> based on https://github.com/friendlyarm/u-boot/tree/nanopi2-v2016.01.
>> For v2016.01 I have also made a working SPL (FriendlyARM U-Boot is
>> using a closed source 2nd-bootloader). My plan is to migrate this
>> also to the current U-Boot.
> 
> Is this somewhat related to Nexell's S5P6818 soc?
> 
> There were some patches [1] posted for U-Boot.
> 
Yes, I think the S5P6818 is a follow-up of the S5P4418. Is it planed to
include those patches into U-Boot master? Or is there a branch where 
those
patches are already included so I can have a look at it and to be able 
to
use those patches where possible?

> For the closed source 2nd bootloader - there are some alternatives on
> the Internet with a source code [2], [3].
> 
Thanks a lot for the links. I did some research on this subject but I 
have not
found any source code for the S5P4418 2ndBootloader. Unfortunately, the
S5P6818 2ndBootloader is not of much use because the initialization of 
the
DDR-Ram Controller is different. So I will have a lock at  [3].

>> 
>> Issues:
>> Please send me a value for "#define MACH_TYPE_S5P4418" for
>> arch/arm/include/asm/mach-types.h.
> 
> I think that non-dt device is a no go nowadays... (as we do strive to
> switch to DTS as much as possible in U-Boot now).
> 
See my reply to Tom Rini.

>> The size of the patch is over 700kB, so I will upload it on
>> http://www.denx.de/wiki/attach/U-Boot/TooBigPatches if not otherwise
>> instructed.
>> 
> 
> 
> Links:
> 
> [1] -
> https:https://github.com/metro94/s5p6818_bootloader//patchwork.ozlabs.org/cover/842828/
> [2] - https://github.com/metro94/s5p6818_bootloader
> [3] - https://github.com/NexellCorp/bl1_s5p4418
> 
> Best regards,
> 
> Lukasz Majewski
> 
> --
> 
> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: 
> lukma at denx.de

Regards,
Stefan Bosch