[PATCH v2 06/10] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit)

[Matthias Brugger <mbrugger@suse.com>]

Adding Tom as he is the arm maintainer.

On 04/05/2020 14:45, Sylwester Nawrocki wrote:
> From: Marek Szyprowski <m.szyprowski@samsung.com>
> 
> Create a non-cacheable mapping for the 0x600000000 physical memory region,
> where MMIO registers for the PCIe XHCI controller are instantiated by the
> PCIe bridge. Due to 32bit limit in the CPU virtual address space in ARM
> 32bit mode, this region is mapped at 0xff800000 CPU virtual address.
> 
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> ---
> Changes since v1:
>  - none.
> ---
>  arch/arm/mach-bcm283x/Kconfig             |  1 +
>  arch/arm/mach-bcm283x/include/mach/base.h |  7 +++++
>  arch/arm/mach-bcm283x/init.c              | 52 +++++++++++++++++++++++++++++++
>  3 files changed, 60 insertions(+)
> 
> diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig
> index 00419bf..bcb7f1d 100644
> --- a/arch/arm/mach-bcm283x/Kconfig
> +++ b/arch/arm/mach-bcm283x/Kconfig
> @@ -36,6 +36,7 @@ config BCM2711_32B
>  	select BCM2711
>  	select ARMV7_LPAE
>  	select CPU_V7A
> +	select PHYS_64BIT
>  
>  config BCM2711_64B
>  	bool "Broadcom BCM2711 SoC 64-bit support"
> diff --git a/arch/arm/mach-bcm283x/include/mach/base.h b/arch/arm/mach-bcm283x/include/mach/base.h
> index c4ae398..1d10dc9 100644
> --- a/arch/arm/mach-bcm283x/include/mach/base.h
> +++ b/arch/arm/mach-bcm283x/include/mach/base.h
> @@ -6,6 +6,13 @@
>  #ifndef _BCM283x_BASE_H_
>  #define _BCM283x_BASE_H_
>  
> +#include <linux/types.h>
> +
>  extern unsigned long rpi_bcm283x_base;
>  
> +#ifdef CONFIG_ARMV7_LPAE
> +extern void *rpi4_phys_to_virt(phys_addr_t paddr);
> +#define phys_to_virt(x) rpi4_phys_to_virt(x)
> +#endif
> +
>  #endif
> diff --git a/arch/arm/mach-bcm283x/init.c b/arch/arm/mach-bcm283x/init.c
> index 6a748da..5d0d160 100644
> --- a/arch/arm/mach-bcm283x/init.c
> +++ b/arch/arm/mach-bcm283x/init.c
> @@ -145,6 +145,58 @@ int mach_cpu_init(void)
>  }
>  
>  #ifdef CONFIG_ARMV7_LPAE
> +
> +#define BCM2711_RPI4_PCIE_XHCI_MMIO_VIRT	0xff800000UL
> +
> +void *rpi4_phys_to_virt(phys_addr_t paddr)
> +{
> +	if (paddr >= BCM2711_RPI4_PCIE_XHCI_MMIO_PHYS)
> +		paddr = paddr - BCM2711_RPI4_PCIE_XHCI_MMIO_PHYS +
> +			BCM2711_RPI4_PCIE_XHCI_MMIO_VIRT;
> +	return (void *)(unsigned long)paddr;

I think for this cases we have addrmap_phys_to_virt() which up to now is only
used by powerpc.

> +}
> +
> +static void set_section_phys(unsigned int section, phys_addr_t phys,
> +			     enum dcache_option option)
> +{
> +	u64 *page_table = (u64 *)gd->arch.tlb_addr;
> +	/* Need to set the access flag to not fault */
> +	u64 value = TTB_SECT_AP | TTB_SECT_AF;
> +
> +	/* Add the page offset */
> +	value |= (phys);
> +
> +	/* Add caching bits */
> +	value |= option;
> +
> +	/* Set PTE */
> +	page_table[section] = value;
> +}
> +
> +static void rpi4_create_pcie_xhci_mapping(void)
> +{
> +	unsigned sect = BCM2711_RPI4_PCIE_XHCI_MMIO_VIRT >> MMU_SECTION_SHIFT;
> +	phys_addr_t phys_addr = BCM2711_RPI4_PCIE_XHCI_MMIO_PHYS;
> +	unsigned int size = BCM2711_RPI4_PCIE_XHCI_MMIO_SIZE;
> +
> +	while (size) {
> +		set_section_phys(sect, phys_addr, DCACHE_OFF);
> +		sect++;
> +		phys_addr += MMU_SECTION_SIZE;
> +		size -= MMU_SECTION_SIZE;
> +	}
> +}

I wonder if we can't do all this in the pcie driver probe function. Maybe we can
create a new function like mmu_set_region_dcache_behaviour_phys which allows us
to update a mapping that's not 1:1.

Tom what do you think?

Regards,
Matthias

> +
> +void arm_init_domains(void)
> +{
> +	/*
> +	 * Hijack this function to prepare a mappings for the PCIe MMIO
> +	 * region for the XHCI controller on RPi4 board.
> +	 * This code is called before enabling the MMU in ARM 32bit mode.
> +	 */
> +	rpi4_create_pcie_xhci_mapping();
> +}
> +
>  void enable_caches(void)
>  {
>  	dcache_enable();
>