* [U-Boot] beagle bootcmd not working
@ 2011-03-05 15:45 Egon Boormans
0 siblings, 0 replies; only message in thread
From: Egon Boormans @ 2011-03-05 15:45 UTC (permalink / raw)
To: u-boot
Dear u-boot specialists,
I've been working a while now with a beagle Xm board and using u-boot to boot a linux kernel. Recently I've performed an update to version u-boot-2011.03-rc1 and found that it's not booting anymore.
It looks like the bootcmd doesn't get set to the CONFIG_BOOTCOMMAND value in the 'include/configs/omap3_beagle.h' file. This value makes it into the 'include/autoconf.mk' file but not into the printenv of the u-boot. If I change the value of bootcmd (using setenv) to the CONFIG_BOOTCOMMAND value, and run bootcmd, everything works fine.
Is this issue known already and if so will it be solved in the next release?
Your help is appreciated.
Thanks,
Egon.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2011-03-05 15:45 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-03-05 15:45 [U-Boot] beagle bootcmd not working Egon Boormans
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox