[PATCH v1] spi: spi-aspeed-smc: convert devfdt_get_addr_index output to phys_addr_t

[Johan Jonker <jbx6244@gmail.com>]

The fdt_addr_t and phys_addr_t size have been decoupled.
A 32bit CPU can expect 64-bit data from the device tree parser,
so convert devfdt_get_addr_index output to phys_addr_t in the
spi-aspeed-smc.c file. Also fix dev_dbg to be able to handle
both sizes.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---

Note:

This is needed for a Rockchip patch serie to pass the test and
must be merged before by Rockchip maintainers:

[PATCH v4 00/11] Fixes for Rockchip NFC driver part 1
https://lore.kernel.org/u-boot/f3dba231-4a55-0a94-dfab-5cab1419d132@gmail.com/

Request for hardware test by Aspeed people.
---
 drivers/spi/spi-aspeed-smc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-aspeed-smc.c b/drivers/spi/spi-aspeed-smc.c
index a3c96333..17696441 100644
--- a/drivers/spi/spi-aspeed-smc.c
+++ b/drivers/spi/spi-aspeed-smc.c
@@ -1125,14 +1125,14 @@ static int apseed_spi_of_to_plat(struct udevice *bus)
 	int ret;
 	struct clk hclk;

-	priv->regs = (void __iomem *)devfdt_get_addr_index(bus, 0);
+	priv->regs = (void __iomem *)((phys_addr_t)devfdt_get_addr_index(bus, 0));
 	if ((u32)priv->regs == FDT_ADDR_T_NONE) {
 		dev_err(bus, "wrong ctrl base\n");
 		return -ENODEV;
 	}

 	plat->ahb_base =
-		(void __iomem *)devfdt_get_addr_size_index(bus, 1, &plat->ahb_sz);
+		(void __iomem *)((phys_addr_t)devfdt_get_addr_size_index(bus, 1, &plat->ahb_sz));
 	if ((u32)plat->ahb_base == FDT_ADDR_T_NONE) {
 		dev_err(bus, "wrong AHB base\n");
 		return -ENODEV;
@@ -1151,8 +1151,8 @@ static int apseed_spi_of_to_plat(struct udevice *bus)
 	plat->hclk_rate = clk_get_rate(&hclk);
 	clk_free(&hclk);

-	dev_dbg(bus, "ctrl_base = 0x%x, ahb_base = 0x%p, size = 0x%lx\n",
-		(u32)priv->regs, plat->ahb_base, plat->ahb_sz);
+	dev_dbg(bus, "ctrl_base = 0x%x, ahb_base = 0x%p, size = 0x%llx\n",
+		(u32)priv->regs, plat->ahb_base, (fdt64_t)plat->ahb_sz);
 	dev_dbg(bus, "hclk = %dMHz, max_cs = %d\n",
 		plat->hclk_rate / 1000000, plat->max_cs);

--
2.20.1