From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kumar Gala Date: Tue, 16 Mar 2004 08:37:33 -0600 Subject: [U-Boot-Users] Patch: Support for PQ27e (8247/48/71/72) chips and MPC8272ADS board In-Reply-To: <16470.43901.237514.894926@gargle.gargle.HOWL> References: <16450.14241.889562.784232@gargle.gargle.HOWL> <4EC0928B-7716-11D8-A105-000393DBC2E8@motorola.com> <16470.43901.237514.894926@gargle.gargle.HOWL> Message-ID: <761C62B8-7757-11D8-A4C6-000393DBC2E8@motorola.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Yuli, I agree with only enabling ports that will be used. I guess I would expect the port to be used in Linux. I'm working on an updated 2.6 SCC uart driver and realized that I needed to enable the 2nd port in BCSR. I had expected that u-boot would have already handled it. - kumar On Mar 16, 2004, at 1:23 AM, Yuli Barcohen wrote: >>>>>> Kumar Gala writes: > > Kumar> Looking at the patch, I was wondering if there was any > reason > Kumar> to not enable both RS232 ports by default. > > Only the console port was enabled before the patch. Is there any reason > for the patch to change this behaviour? Also, I see no reason to enable > any peripheral which isn't going to be used. > > -- > ======================================================================= > = > Yuli Barcohen | Phone +972-9-765-1788 | Software Project Leader > yuli at arabellasw.com | Fax +972-9-765-7494 | Arabella Software, > Israel > ======================================================================= > =