[U-Boot-Users] u-boot support for winCE on OSK board

[Naveen Atmakuri <naveen.maillist@gmail.com>]

Hi,

When I applied the patch to my u-boot sources, it gave me an error.
So i carried out the changes manually and compiled the u-boot.

Then i used the new u-boot as the bootloader. 
After downloading the NK.bin source on to the SDRAM using tftp, i gave
the following command.
# bootm 0x10000000

But it prompted that "Invalid file format".

Even i tried with the NK.bn0 which is a raw binary file in winCE, but
i got the same error.


On the same OSK board if i have to support the lcd display in the
u-boot itself what are the things that i have to take care?


Thanks in advance,
Naveen
On 7/6/05, Wolfgang Denk <wd@denx.de> wrote:
> In message <6.2.1.2.0.20050706124745.01ceebf8@192.168.2.1> you wrote:
> >
> > >Does the u-boot supports winCE?
> >
> > not officially at the moment (of course, Wolfgang correct me if I'm wrong.. ;-)
> 
> Wince? What's that?
> 
> Best regards,
> 
> Wolfgang Denk
> 
> --
> Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> The more we disagree, the more chance there is that at least  one  of
> us is right.
> 
> 
> -------------------------------------------------------
> SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
> from IBM. Find simple to follow Roadmaps, straightforward articles,
> informative Webcasts and more! Get everything you need to get up to
> speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>