[U-Boot-Users] MPC8349-mITX-GP and MontaVista Linux

[Andy Pont <peeble73@yahoo.com>]

Hello,

I am trying to get MontaVista Linux Pro 5.0 to run on
the Freescale MPC8349-mITX-GP reference platform using
U-Boot 1.3.2-rc2.  When I try to start my kernel I get
the following output:

MPC8349E-mITX-GP> bootm $loadaddr - $fdtaddr
## Booting image at 00a00000 ...
   Image Name:   Linux-2.6.18_pro500-8349itx
   Created:      2007-10-22  19:02:12 UTC
   Image Type:   PowerPC Linux Kernel Image (gzip
compressed)
   Data Size:    2214322 Bytes =  2.1 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
   Booting using the fdt at 0x800000
   Loading Device Tree to 007fe000, end 007fefe7 ...
OK
WARNING: could not create /chosen FDT_ERR_NOSPACE.
ERROR: /chosen node create failed - must RESET the
board to recover.
Resetting the board.

Is this error a problem with the way that U-Boot is
setting up the FDT or is it a problem with the way my
Linux kernel is interpreting the information that the
bootloader has given it?

If it makes any difference the kernel and FDT file
were built using the MontaVista LSP for the non-GP
version of the 8349-mITX as that is what they
currently support!

TIA.




      __________________________________________________________
Sent from Yahoo! Mail.
The World's Favourite Email http://uk.docs.yahoo.com/nowyoucan.html