[PATCH] common/board_f.c: use #ifdefs a little more consistently

[Rasmus Villemoes <rasmus.villemoes@prevas.dk>]

On 28/02/2020 00.40, Simon Glass wrote:
> Hi Rasmus,
> 
> On Thu, 27 Feb 2020 at 00:18, Rasmus Villemoes
> <rasmus.villemoes@prevas.dk> wrote:
>>
>> Some init functions, e.g. print_resetinfo(), are conditionally defined
>> depending on some config options, and are correspondingly
>> conditionally included in the init_sequence_f[] array.
>>
>> Others are unconditionally defined and included in init_sequence_f[],
>> but have their entire body, sans a mandatory "return 0", conditionally
>> compiled.
>>
>> For the simple cases, switch to the former model, making it a bit more
>> consistent. This also makes the U-Boot image very slightly smaller and
>> avoids a few useless calls to no-op functions during board_init_f.
> 
> Can you check if it definitely does change the size? 

It does, I did build to see how much. On ppc, it's 8 bytes per no-op
function (one "put 0 in r3", one blr instruction), plus 4 bytes for the
array entry, plus 4 bytes for a .fixup entry - in my case ending up with
7*16=112, because all but the #ifndef CONFIG_OF_EMBED applied.

The reason I ask
> is that it inlines those function calls in the normal case, at least
> from my inspection.

The compiler can't inline and thus eliminate these as they are not
called directly, but their addresses are used to populate the
init_sequence_f[] array and called through that.

> Using if() is preferable to #if if there is no cost.

Completely agree, and I also prefer to have the linker eliminate unused
functions rather than cluttering the C code with #ifdefs. But that can't
be used in this case.

Anyway, this wasn't primarily to save 112 bytes or whatnot from the
U-Boot image, just to use one style a little more consistently.

Rasmus