[U-Boot-Users] Re: U-Boot 1.1.3 does not boot with MPC8349E

Florian Behrens
2005-10-11T15:25:53Z

Hi,

thanks for your help, but finally I found the problem myself (pulling out the USB TAP instead of a BDI2000 ;-). The text segment in U-Boot 1.1.3 is placed at 0xFE700000 in board/mpc8349ads/config.mk, while the README.mpc83xxads says to flash it to 0xFE000000. Changing the text segment address makes it working!

You may choose to change either the README or the config.mk.

Regards,
Florian.

Machen Sie aus 14 Cent spielend bis zu 100 Euro!
Die neue Gaming-Area von Arcor - ?ber 50 Onlinespiele im Angebot.