public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Stefan Roese <sr@denx.de>
To: "Pali Rohár" <pali@kernel.org>,
	"Andre Heider" <a.heider@gmail.com>,
	"Gérald Kerma" <gerald@gk2.net>,
	"Konstantin Porotchkin" <kostap@marvell.com>
Cc: u-boot@lists.denx.de
Subject: Re: [PATCH] arm: mvebu: Espressobin: Enable 'mtd' command and define SPI NOR partitions
Date: Mon, 19 Jul 2021 09:03:01 +0200	[thread overview]
Message-ID: <78b336bf-e098-ed18-1802-acddc6578afd@denx.de> (raw)
In-Reply-To: <20210716103442.21842-1-pali@kernel.org>

On 16.07.21 12:34, Pali Rohár wrote:
> U-Boot now supports parsing SPI NOR partitions from Device Tree. So enable
> 'mtd' command support for Espressobin board and define partition layout in
> U-Boot Espressobin DTS file. Access to SPI NOR via 'sf' command is old
> method and 'mtd' command is now preferred variant.
> 
>  From include file remove '#define CONFIG_MTD_PARTITIONS' as this option is
> now defined and enabled in defconfig file. This change is required to fix
> compile error:
> 
>        CC      arch/arm/lib/asm-offsets.s
>      In file included from include/config.h:4,
>                       from include/common.h:16,
>                       from lib/asm-offsets.c:14:
>      include/configs/mvebu_armada-37xx.h:63: warning: "CONFIG_MTD_PARTITIONS" redefined
>       #define CONFIG_MTD_PARTITIONS  /* required for UBI partition support */
> 
>      In file included from ././include/linux/kconfig.h:4,
>                       from <command-line>:
>      include/generated/autoconf.h:44: note: this is the location of the previous definition
>       #define CONFIG_MTD_PARTITIONS 1
> 
> After enabling support for mtd command, output from 'mtd list' on
> Espressobin board is:
> 
>      => mtd list
>      List of MTD devices:
>      * w25q32dw
>        - device: spi-flash@0
>        - parent: spi@10600
>        - driver: jedec_spi_nor
>        - path: /soc/internal-regs/spi@10600/spi-flash@0
>        - type: NOR flash
>        - block size: 0x1000 bytes
>        - min I/O: 0x1 bytes
>        - 0x000000000000-0x000000400000 : "w25q32dw"
>                - 0x000000000000-0x0000003f0000 : "firmware"
>                - 0x0000003f0000-0x000000400000 : "u-boot-env"
>      =>
> 
> Signed-off-by: Pali Rohár <pali@kernel.org>

Reviewed-by: Stefan Roese <sr@denx.de>

Thanks,
Stefan

> ---
>   arch/arm/dts/armada-3720-espressobin.dts    | 18 ++++++++++++++++++
>   configs/mvebu_espressobin-88f3720_defconfig |  3 +++
>   include/configs/mvebu_armada-37xx.h         |  5 -----
>   3 files changed, 21 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts
> index d86d8f0b63cf..cba6139be690 100644
> --- a/arch/arm/dts/armada-3720-espressobin.dts
> +++ b/arch/arm/dts/armada-3720-espressobin.dts
> @@ -164,6 +164,24 @@
>   		reg = <0>; /* Chip select 0 */
>   		spi-max-frequency = <50000000>;
>   		m25p,fast-read;
> +
> +#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
> +		partitions {
> +			compatible = "fixed-partitions";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +
> +			partition@firmware {
> +				reg = <0 CONFIG_ENV_OFFSET>;
> +				label = "firmware";
> +			};
> +
> +			partition@u-boot-env {
> +				reg = <CONFIG_ENV_OFFSET CONFIG_ENV_SIZE>;
> +				label = "u-boot-env";
> +			};
> +		};
> +#endif
>   	};
>   };
>   
> diff --git a/configs/mvebu_espressobin-88f3720_defconfig b/configs/mvebu_espressobin-88f3720_defconfig
> index dc199cfe503b..78796115cd38 100644
> --- a/configs/mvebu_espressobin-88f3720_defconfig
> +++ b/configs/mvebu_espressobin-88f3720_defconfig
> @@ -28,6 +28,7 @@ CONFIG_BOARD_LATE_INIT=y
>   CONFIG_CMD_GPIO=y
>   CONFIG_CMD_I2C=y
>   CONFIG_CMD_MMC=y
> +CONFIG_CMD_MTD=y
>   CONFIG_CMD_PCI=y
>   CONFIG_CMD_SPI=y
>   CONFIG_CMD_USB=y
> @@ -54,6 +55,7 @@ CONFIG_MMC_SDHCI=y
>   CONFIG_MMC_SDHCI_SDMA=y
>   CONFIG_MMC_SDHCI_XENON=y
>   CONFIG_MTD=y
> +CONFIG_DM_MTD=y
>   CONFIG_SF_DEFAULT_MODE=0
>   CONFIG_SF_DEFAULT_SPEED=40000000
>   CONFIG_SPI_FLASH_GIGADEVICE=y
> @@ -62,6 +64,7 @@ CONFIG_SPI_FLASH_MACRONIX=y
>   CONFIG_SPI_FLASH_SPANSION=y
>   CONFIG_SPI_FLASH_STMICRO=y
>   CONFIG_SPI_FLASH_WINBOND=y
> +CONFIG_SPI_FLASH_MTD=y
>   CONFIG_PHY_MARVELL=y
>   CONFIG_PHY_GIGE=y
>   CONFIG_E1000=y
> diff --git a/include/configs/mvebu_armada-37xx.h b/include/configs/mvebu_armada-37xx.h
> index a2bea2947dd1..c8c34d7d92dd 100644
> --- a/include/configs/mvebu_armada-37xx.h
> +++ b/include/configs/mvebu_armada-37xx.h
> @@ -57,11 +57,6 @@
>   #define CONFIG_I2C_MV
>   #define CONFIG_SYS_I2C_SLAVE		0x0
>   
> -/*
> - * SPI Flash configuration
> - */
> -#define CONFIG_MTD_PARTITIONS		/* required for UBI partition support */
> -
>   /*
>    * Environment
>    */
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr@denx.de

      parent reply	other threads:[~2021-07-19  7:03 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-16 10:34 [PATCH] arm: mvebu: Espressobin: Enable 'mtd' command and define SPI NOR partitions Pali Rohár
2021-07-18  5:05 ` [EXT] " Kostya Porotchkin
2021-07-19  7:03 ` Stefan Roese [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=78b336bf-e098-ed18-1802-acddc6578afd@denx.de \
    --to=sr@denx.de \
    --cc=a.heider@gmail.com \
    --cc=gerald@gk2.net \
    --cc=kostap@marvell.com \
    --cc=pali@kernel.org \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox