From mboxrd@z Thu Jan  1 00:00:00 1970
From: Joris Offouga <offougajoris@gmail.com>
Date: Sat, 16 Feb 2019 13:33:43 +0100
Subject: [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM
In-Reply-To: <CAOMZO5C__CH+_Cjy6W=nW3ivKfY_5DMBDjBGNQwUeBRUwLP4pg@mail.gmail.com>
References: <1548023912-14308-1-git-send-email-offougajoris@gmail.com>
 <20190122104701.74934f97@jawa>
 <9980fc32-0e2b-db5e-72d8-8dcfadc7b767@gmail.com>
 <CAOMZO5CphrwgVsZSz+43y0DvLFaDy1hxvvRPo0rJxsJ3Qx528g@mail.gmail.com>
 <20190215125021.4a4f6340@jawa>
 <3EDF066A-7E4F-4638-80C8-6FAB1D945455@gmail.com>
 <CAOMZO5C__CH+_Cjy6W=nW3ivKfY_5DMBDjBGNQwUeBRUwLP4pg@mail.gmail.com>
Message-ID: <797f282f-11f8-a5e1-3ffe-385dc3cede08@gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 8bit
To: u-boot@lists.denx.de


Le 16/02/2019 à 13:17, Fabio Estevam a écrit :
> Hi Joris,
>
> On Sat, Feb 16, 2019 at 9:06 AM Offouga Joris <offougajoris@gmail.com> wrote:
>
>> Hi Fabio
>>
>> I followed Lukasz's advice and I increased the size of the U-Boot in the dfu_alt_info and there is no more error. However, once the SPL and U-Boot are changed and the board  reboots with the jumper in Boot from emmc, the SPL can not load the U-Boot.
> What is the U-Boot size you used in the dfu_alt_info?

"u-boot raw 0x8a 0x1000"

>
> What is the error you see in SPL now?
See this log :
U-Boot SPL 2019.04-rc1-00142-g7fe4b77-dirty (Feb 15 2019 - 20:11:50 +0100)
Trying to boot from MMC1
>
> Thanks
Thanks