U-Boot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Murali Karicheri <m-karicheri2@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 0/7] Add netcp networking support on K2G ICE EVM
Date: Mon, 25 Feb 2019 16:47:16 -0500	[thread overview]
Message-ID: <7c6e23f2-22d2-1d75-c815-e94c19f889b0@ti.com> (raw)
In-Reply-To: <20190225202739.26916-1-m-karicheri2@ti.com>

Hello Maintainer,

On 02/25/2019 03:27 PM, Murali Karicheri wrote:
> This patch series add networking capability to K2G ICE EVM
> based on netcp driver. Networking function has been tested
> using the latest master branch from u-boot repo. Following
> boot mode has been tested for networking.
> 
> Net boot (tftp images over ethernet interface and boot kernel)
>            log at https://pastebin.ubuntu.com/p/b3nyCXPhWc/
> MMC boot: (load images from boot folder of rootfs and boot kernel)
>            log at https://pastebin.ubuntu.com/p/FWycmKd9KB/
> 
> Used Linux upstream linux kernel version 4.19.9 for the tests.
> 
> Please review and apply if this looks good.
> 
> Thanks
> 
> Revision history:
> 
>   v4: Sorted pins by pin number in patch 1 and 2 as per comment.
>       Collected Acked-by and included in patch
>   v3: Addressed comment to use KConfig for enable TI PHY driver and also
>       netcp driver comment to use proper function as in cpsw driver.
>       Rebased to latest on master branch.
>   v2: Collected Reviewed-by for patch 1 and 2. Rebased to latest
>       on master
> 
> Murali Karicheri (7):
>    ARM: k2g-gp-evm: update to rgmii pinmux configuration
>    ARM: k2g-ice: Add pinmux support for rgmii interface
>    net: netcp: add support for phy with rgmii ids
>    ARM: k2g: add a workaround to reset the phy
>    ARM: dts: k2g-evm: remove unused phy-mode property from phy node
>    k2g: config enable ti phy dp83867 for k2g
>    ARM: dts: k2g-ice: add dt node for netcp
> 
>   arch/arm/dts/keystone-k2g-evm.dts             |  1 -
>   arch/arm/dts/keystone-k2g-ice.dts             | 35 +++++++++++++
>   .../mach-keystone/include/mach/hardware-k2g.h |  3 ++
>   arch/arm/mach-keystone/include/mach/mux-k2g.h |  5 ++
>   board/ti/ks2_evm/board_k2g.c                  | 15 ++++++
>   board/ti/ks2_evm/mux-k2g.h                    | 51 +++++++++++++------
>   configs/k2g_evm_defconfig                     |  1 +
>   drivers/net/ti/keystone_net.c                 | 22 +++++++-
>   8 files changed, 116 insertions(+), 17 deletions(-)
> 

Please merge this version if looks good. Have addressed all comments 
received so far.

Murali

  parent reply	other threads:[~2019-02-25 21:47 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-25 20:27 [U-Boot] [PATCH v4 0/7] Add netcp networking support on K2G ICE EVM Murali Karicheri
2019-02-25 20:27 ` [U-Boot] [PATCH v4 1/7] ARM: k2g-gp-evm: update to rgmii pinmux configuration Murali Karicheri
2019-02-25 21:53   ` Joe Hershberger
2019-03-05 18:05   ` [U-Boot] " Joe Hershberger
2019-02-25 20:27 ` [U-Boot] [PATCH v4 2/7] ARM: k2g-ice: Add pinmux support for rgmii interface Murali Karicheri
2019-03-05 18:05   ` [U-Boot] " Joe Hershberger
2019-02-25 20:27 ` [U-Boot] [PATCH v4 3/7] net: netcp: add support for phy with rgmii ids Murali Karicheri
2019-03-05 18:05   ` [U-Boot] " Joe Hershberger
2019-02-25 20:27 ` [U-Boot] [PATCH v4 4/7] ARM: k2g: add a workaround to reset the phy Murali Karicheri
2019-03-05 18:05   ` [U-Boot] " Joe Hershberger
2019-02-25 20:27 ` [U-Boot] [PATCH v4 5/7] ARM: dts: k2g-evm: remove unused phy-mode property from phy node Murali Karicheri
2019-03-05 18:05   ` [U-Boot] " Joe Hershberger
2019-02-25 20:27 ` [U-Boot] [PATCH v4 6/7] k2g: config enable ti phy dp83867 for k2g Murali Karicheri
2019-03-05 18:05   ` [U-Boot] " Joe Hershberger
2019-02-25 20:27 ` [U-Boot] [PATCH v4 7/7] ARM: dts: k2g-ice: add dt node for netcp Murali Karicheri
2019-03-05 18:05   ` [U-Boot] " Joe Hershberger
2019-02-25 21:47 ` Murali Karicheri [this message]
2019-02-25 21:47   ` [U-Boot] [PATCH v4 0/7] Add netcp networking support on K2G ICE EVM Joe Hershberger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7c6e23f2-22d2-1d75-c815-e94c19f889b0@ti.com \
    --to=m-karicheri2@ti.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox