From mboxrd@z Thu Jan  1 00:00:00 1970
From: Kevin Hilman <khilman@kernel.org>
Date: Tue, 09 Dec 2014 15:36:00 -0800
Subject: [U-Boot] [PATCH v11 0/3] Adds support for Exynos5422 odroid xu3
	board
In-Reply-To: <1418092779-20025-1-git-send-email-human.hwang@samsung.com>
	(Hyungwon Hwang's message of "Tue, 09 Dec 2014 11:39:36 +0900")
References: <1418092779-20025-1-git-send-email-human.hwang@samsung.com>
Message-ID: <7h1to8qtun.fsf@deeprootsystems.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hyungwon Hwang <human.hwang@samsung.com> writes:

> This is v11 of the patchset adding support Odroud XU3 board.

I finally got around to testing this on top of v2015.01-rc3 on my XU3.

As I mentioned earlier, I had to enable the USB and networking options
so I could dhcp/tftp but after that it works for me.

Feel free to add:

Tested-by: Kevin Hilman <khilman@linaro.org>

[...]

> Note: If you use micro SD card for your test you have to apply the below
> patch additionally. This patch is needed, because micro sd card is
> recognized as MMC1 instead of MMC0. Additional work is needed to make it
> work regardless of device id.

FYI, with or without your MMC ID patch, I wasn't able to save the
environment to the SD card I'm booting from:

ODROID-XU3 # saveenv
Saving Environment to MMC...
dwmci_send_cmd: Timeout.
MMC init failed

Kevin