From: Kevin Hilman <khilman@kernel.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 00/25] dm: Introduce Rockchip RK3288 support
Date: Wed, 24 Jun 2015 09:54:07 -0700 [thread overview]
Message-ID: <7hegl1rqs0.fsf@deeprootsystems.com> (raw)
In-Reply-To: <1435102150-29438-1-git-send-email-sjg@chromium.org> (Simon Glass's message of "Tue, 23 Jun 2015 17:28:45 -0600")
Simon Glass <sjg@chromium.org> writes:
> The Rockchip RK3288 is based on a quad-core Cortex-A17 CPU and has a good
> set of peripherals. Various full-featured U-Boot ports are available and
> this is an attempt to bring those features into mainline. With this series
> the Firefly RK3288 can boot to a prompt from an SD card.
>
> Since much of the code is generic, this also supports the Radxa Rock Pro.
> Since there is no device tree available for that yet, it uses the same
> config and device tree as the Firefly. This works because not all
> peripherals are supported, so the differences don't matter.
>
> Support for booting from USB OTG is also provided, using the on-chip boot
> ROM and the rkflashtool utility. This can boot as far as SPL, but there is
> no support for reading U-Boot proper from USB as yet. This requires
> implementing a suitable protocol (perhaps DFU or Rockchip's proprietary
> one) in SPL.
>
> Support is also provided for the Haier Chromebook, which is based on the
> same SoC. In this case it boots from SPI rather than an SD card.
Any testing on the Hisense Chromebook with the same SoC? I don't know
if there are significant differences with the Haier one that would
effect this.
Kevin
next prev parent reply other threads:[~2015-06-24 16:54 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-23 23:28 [U-Boot] [PATCH v3 00/25] dm: Introduce Rockchip RK3288 support Simon Glass
2015-06-23 23:28 ` [U-Boot] [PATCH v3 01/25] rockchip: Add serial support Simon Glass
2015-06-23 23:28 ` [U-Boot] [PATCH v3 02/25] rockchip: Bring in RK3288 device tree file includes and bindings Simon Glass
2015-06-23 23:28 ` [U-Boot] [PATCH v3 03/25] rockchip: rk3288: dts: Make core devices available early Simon Glass
2015-06-23 23:28 ` [U-Boot] [PATCH v3 04/25] mkimage: Allow padding to any length Simon Glass
2015-06-25 22:35 ` Joe Hershberger
2015-06-23 23:28 ` [U-Boot] [PATCH v3 05/25] mkimage: Allow the original file size to be recorded Simon Glass
2015-06-25 22:36 ` Joe Hershberger
2015-06-23 23:28 ` [U-Boot] [PATCH v3 06/25] rockchip: Add the rkimage format to mkimage Simon Glass
2015-06-24 4:13 ` Naoki FUKAUMI
2015-06-23 23:28 ` [U-Boot] [PATCH v3 07/25] rockchip: Add support for the SD image Simon Glass
2015-06-23 23:28 ` [U-Boot] [PATCH v3 08/25] rockchip: Add support for the SPI image Simon Glass
2015-06-24 4:05 ` Naoki FUKAUMI
2015-06-23 23:28 ` [U-Boot] [PATCH v3 09/25] rockchip: gpio: Add rockchip GPIO driver Simon Glass
2015-06-23 23:28 ` [U-Boot] [PATCH v3 10/25] rockchip: Add basic peripheral and clock definitions Simon Glass
2015-06-23 23:28 ` [U-Boot] [PATCH v3 11/25] power: Add support for ACT8846 PMIC Simon Glass
2015-06-23 23:28 ` [U-Boot] [PATCH v3 12/25] power: regulator: Add a driver for ACT8846 regulators Simon Glass
2015-06-23 23:28 ` [U-Boot] [PATCH v3 13/25] rockchip: rk3288: Add clock driver Simon Glass
2015-06-23 23:28 ` [U-Boot] [PATCH v3 14/25] rockchip: rk3288: Add header files for PMU and GRF Simon Glass
2015-06-23 23:29 ` [U-Boot] [PATCH v3 15/25] rockchip: rk3288: Add SoC reset driver Simon Glass
2015-06-23 23:29 ` [U-Boot] [PATCH v3 16/25] rockchip: rk3288: Add a simple syscon driver Simon Glass
2015-06-23 23:29 ` [U-Boot] [PATCH v3 17/25] rockchip: rk3288: Add pinctrl driver Simon Glass
2015-07-06 17:24 ` Masahiro Yamada
2015-07-06 17:32 ` Simon Glass
2015-07-08 9:35 ` Masahiro Yamada
2015-07-08 20:27 ` Simon Glass
2015-06-23 23:29 ` [U-Boot] [PATCH v3 18/25] rockchip: rk3288: Add SDRAM init Simon Glass
2015-06-23 23:29 ` [U-Boot] [PATCH v3 19/25] rockchip: Add an MMC driver Simon Glass
2015-06-26 10:23 ` Jaehoon Chung
2015-07-28 17:00 ` Andre Przywara
2015-06-23 23:29 ` [U-Boot] [PATCH v3 20/25] rockchip: Add core SoC start-up code Simon Glass
2015-06-23 23:29 ` [U-Boot] [PATCH v3 21/25] rockchip: Add I2C driver Simon Glass
2015-06-23 23:29 ` [U-Boot] [PATCH v3 22/25] rockchip: Add SPI driver Simon Glass
2015-06-24 5:56 ` Jagan Teki
2015-06-23 23:29 ` [U-Boot] [PATCH v3 23/25] rockchip: Add basic support for firefly-rk3288 Simon Glass
2015-06-23 23:29 ` [U-Boot] [PATCH v3 24/25] rockchip: Add basic support for jerry Simon Glass
2015-06-23 23:29 ` [U-Boot] [PATCH v3 25/25] rockchip: Add a simple README Simon Glass
2015-06-24 4:24 ` Naoki FUKAUMI
2015-07-27 17:08 ` Andre Przywara
2015-07-27 17:13 ` Simon Glass
2015-08-06 15:35 ` Christoph Fritz
2015-08-06 23:19 ` Simon Glass
2015-06-24 4:02 ` [U-Boot] [PATCH v3 00/25] dm: Introduce Rockchip RK3288 support Naoki FUKAUMI
2015-06-24 16:54 ` Kevin Hilman [this message]
2015-06-24 17:39 ` Heiko Stübner
2015-06-24 17:48 ` Simon Glass
[not found] ` <559BE2F2.3020509@googlemail.com>
2015-07-08 15:25 ` Simon Glass
2015-07-09 13:16 ` Ulrich Prinz
2015-07-09 18:10 ` Simon Glass
[not found] ` <55A2E5DB.5010604@googlemail.com>
2015-07-13 21:05 ` Ulrich Prinz
2015-07-14 15:54 ` Simon Glass
2015-07-10 8:24 ` Sjoerd Simons
2015-07-10 16:08 ` Simon Glass
2015-07-12 18:26 ` Paul Kocialkowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7hegl1rqs0.fsf@deeprootsystems.com \
--to=khilman@kernel.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox