From: E Shattow <e@freeshell.de>
To: Minda Chen <minda.chen@starfivetech.com>,
Hal Feng <hal.feng@starfivetech.com>,
Leo Liang <ycliang@andestech.com>,
Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: u-boot@lists.denx.de
Subject: Re: [RESEND PATCH v4 0/3] Add upstream board Xunlong Orange Pi RV
Date: Thu, 12 Mar 2026 01:19:30 -0700 [thread overview]
Message-ID: <802f0860-07fc-4351-b9e7-c57d7b98f45c@freeshell.de> (raw)
In-Reply-To: <20260305170043.33994-1-e@freeshell.de>
Replying a question from Heinrich review on the non-RESEND of this
series v4, "Did Shenzhen Xunlong Software Co., Ltd ever respond to the
suggested EEPROM change?"
On 3/5/26 09:00, E Shattow wrote:
> Xunlong Orange Pi RV patches are now in the Linux v6.19 release, so let's
> introduce support for this board.
>
> Note: The content of EEPROM is known to not be unique on this board, and
> an (optional) invented "XOPIRV" identifier is implemented with this
> series. Without, there are reports that the board is detected in U-Boot as
> StarFive VisionFive 2 1.3b, and is then functional enough to load the
> devicetree prior to booting Linux.
>
> RESEND v4: has collected tags that were missing from v4 as sent to list
>
> Changes since v3:
> - Collect tags (no code changes) [n.b. this failed, see RESEND v4 instead]
> - Cherry-picked dts subtree patches dropped as redundant:
> Drop patch 1/5 "dt-bindings: riscv: starfive: add xunlong,orangepi-rv"
> Drop patch 2/5 "riscv: dts: starfive: add Orange Pi RV"
>
> Changes since v2:
> - Collect tags (no code changes)
> - Adjust missing S-o-by tag to first of tags list order for patch 4
> "configs: starfive: Add Orange Pi RV to visionfive2".
>
> Changes since RFC v1:
> - Cherrypick from devicetree-rebasing instead of importing upstream dts
> as -u-boot.dtsi overrides.
> - Add basic documentation
> - Mention invented "XOPIRV" identifier in commit messages
> - Rebase on origin/next
>
>
> E Shattow (3):
> board: starfive: visionfive2: Add Orange Pi RV selection by product_id
> configs: starfive: Add Orange Pi RV to visionfive2
> doc: board: starfive: Add Xunlong OrangePi RV
>
> board/starfive/visionfive2/spl.c | 3 ++
> .../visionfive2/starfive_visionfive2.c | 2 ++
> configs/starfive_visionfive2_defconfig | 2 +-
> doc/board/starfive/index.rst | 1 +
> doc/board/starfive/orangepi_rv.rst | 35 +++++++++++++++++++
> 5 files changed, 42 insertions(+), 1 deletion(-)
> create mode 100644 doc/board/starfive/orangepi_rv.rst
>
>
> base-commit: c0ca147ac6228949a6d6497531c9f2f4a0dc6c67
Heinrich, no I did not get a response beyond what their sales
representative would say, that they do not give samples and there is
documentation at their website only. Likely this question I asked went
nowhere and was read by person(s) who could not engage with me on the
topic. Anyone with a contact at that company is welcome (in my opinion)
to push this issue further and get an answer from someone with agency in
the matter. -E
prev parent reply other threads:[~2026-03-12 8:19 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-05 17:00 [RESEND PATCH v4 0/3] Add upstream board Xunlong Orange Pi RV E Shattow
2026-03-05 17:00 ` [RESEND PATCH v4 1/3] board: starfive: visionfive2: Add Orange Pi RV selection by product_id E Shattow
2026-03-05 17:00 ` [RESEND PATCH v4 2/3] configs: starfive: Add Orange Pi RV to visionfive2 E Shattow
2026-03-05 17:00 ` [RESEND PATCH v4 3/3] doc: board: starfive: Add Xunlong OrangePi RV E Shattow
2026-03-12 8:19 ` E Shattow [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=802f0860-07fc-4351-b9e7-c57d7b98f45c@freeshell.de \
--to=e@freeshell.de \
--cc=hal.feng@starfivetech.com \
--cc=minda.chen@starfivetech.com \
--cc=u-boot@lists.denx.de \
--cc=xypron.glpk@gmx.de \
--cc=ycliang@andestech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox