Re: [PATCH 3/6] sunxi: f1c100: move SKIP_LOWLEVEL_INIT_ONLY into Kconfig

["Jernej Škrabec" <jernej.skrabec@gmail.com>]

Hi Andre,

Dne sreda, 12. oktober 2022 ob 18:34:55 CEST je Andre Przywara napisal(a):
> So far we stated the lack of a lowlevel() init function for the F1C100s
> board by defining the respective SKIP_* symbol in the board's
> defconfig. However we don't expect any *board* to employ such low level
> code, so expect this to be never used for the ARMv5 Allwinner SoCs.
> 
> Select the appropriate symbols in the Kconfig, so that we can remove
> them from the defconfig, and avoid putting them in future defconfigs for
> other boards.
> 
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Best regards,
Jernej

> ---
>  arch/arm/mach-sunxi/Kconfig     | 2 ++
>  configs/licheepi_nano_defconfig | 2 --
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
> index 9aa66deb9fd..fc5d8bb3c19 100644
> --- a/arch/arm/mach-sunxi/Kconfig
> +++ b/arch/arm/mach-sunxi/Kconfig
> @@ -185,6 +185,8 @@ config MACH_SUNIV
>  	select CPU_ARM926EJS
>  	select SUNXI_GEN_SUN6I
>  	select SUPPORT_SPL
> +	select SKIP_LOWLEVEL_INIT_ONLY
> +	select SPL_SKIP_LOWLEVEL_INIT_ONLY
> 
>  config MACH_SUN4I
>  	bool "sun4i (Allwinner A10)"
> diff --git a/configs/licheepi_nano_defconfig
> b/configs/licheepi_nano_defconfig index 14e6bcda927..09f1a19cdbe 100644
> --- a/configs/licheepi_nano_defconfig
> +++ b/configs/licheepi_nano_defconfig
> @@ -1,6 +1,4 @@
>  CONFIG_ARM=y
> -CONFIG_SKIP_LOWLEVEL_INIT_ONLY=y
> -CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y
>  CONFIG_SYS_DCACHE_OFF=y
>  CONFIG_ARCH_SUNXI=y
>  CONFIG_DEFAULT_DEVICE_TREE="suniv-f1c100s-licheepi-nano"
> --
> 2.25.1