public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: "Pali Rohár" <pali.rohar@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] omap3: board.c - Fix compile warnings
Date: Sun, 15 Jan 2012 00:40:33 +0100	[thread overview]
Message-ID: <8345085.JyySKeOEAJ@pali> (raw)
In-Reply-To: <201201142112.00167.marek.vasut@gmail.com>

On Saturday 14 January 2012 21:12:00 Marek Vasut wrote:
> >  * This patch fix compile warnings when CONFIG_SYS_L2CACHE_OFF is enabled
> >  
> >    board.c:48:13: warning: ?omap3_invalidate_l2_cache_secure? declared
> > 
> > ?static? but never defined board.c:373:13: warning: ?omap3_update_aux_cr?
> > defined but not used
> > 
> > Signed-off-by: Pali Roh?r <pali.rohar@gmail.com>
> > ---
> > 
> >  arch/arm/cpu/armv7/omap3/board.c |    5 +++++
> >  1 files changed, 5 insertions(+), 0 deletions(-)
> > 
> > diff --git a/arch/arm/cpu/armv7/omap3/board.c
> > b/arch/arm/cpu/armv7/omap3/board.c index 1f33c63..52514ae 100644
> > --- a/arch/arm/cpu/armv7/omap3/board.c
> > +++ b/arch/arm/cpu/armv7/omap3/board.c
> > @@ -45,7 +45,10 @@
> > 
> >  /* Declarations */
> >  extern omap3_sysinfo sysinfo;
> >  static void omap3_setup_aux_cr(void);
> > 
> > +
> > +#ifndef CONFIG_SYS_L2CACHE_OFF
> > 
> >  static void omap3_invalidate_l2_cache_secure(void);
> > 
> > +#endif
> 
> This is due to the ordering, right ? Now, split this into two patches,
> because you're actually doing two unrelated things.

No, function omap3_invalidate_l2_cache_secure is defined in block #ifndef 
CONFIG_SYS_L2CACHE_OFF. So declaration should be in #ifndef too.

> 
> >  static const struct gpio_bank gpio_bank_34xx[6] = {
> >  
> >  	{ (void *)OMAP34XX_GPIO1_BASE, METHOD_GPIO_24XX },
> > 
> > @@ -370,6 +373,7 @@ static void omap3_update_aux_cr_secure(u32 set_bits,
> > u32 clear_bits) }
> > 
> >  }
> > 
> > +#ifndef CONFIG_SYS_L2CACHE_OFF
> > 
> >  static void omap3_update_aux_cr(u32 set_bits, u32 clear_bits)
> >  {
> >  
> >  	u32 acr;
> > 
> > @@ -382,6 +386,7 @@ static void omap3_update_aux_cr(u32 set_bits, u32
> > clear_bits) /* Write ACR - affects non-secure banked bits */
> > 
> >  	asm volatile ("mcr p15, 0, %0, c1, c0, 1" : : "r" (acr));
> >  
> >  }
> > 
> > +#endif
> 
> Just move this function a few lines below instead of adding more CPP bloat.

Function omap3_update_aux_cr is called only when CONFIG_SYS_L2CACHE_OFF is not 
defined, so adding #ifndef is needed.

> 
> >  static void omap3_setup_aux_cr(void)
> >  {
> 
> Also, does this manifest on omap4 too?
> 
> M

-- 
Pali Roh?r
pali.rohar at gmail.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120115/9b4be01f/attachment.pgp>

  parent reply	other threads:[~2012-01-14 23:40 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-01-14 18:32 [U-Boot] [PATCH] omap3: board.c - Fix compile warnings Pali Rohár
2012-01-14 20:12 ` Marek Vasut
2012-01-14 20:13   ` Marek Vasut
2012-01-14 23:40   ` Pali Rohár [this message]
2012-01-14 23:59     ` Marek Vasut
2012-01-15  0:00     ` Tom Rini
2012-01-15  0:26       ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8345085.JyySKeOEAJ@pali \
    --to=pali.rohar@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox