From mboxrd@z Thu Jan  1 00:00:00 1970
From: Peter.Chubb at data61.csiro.au <Peter.Chubb@data61.csiro.au>
Date: Thu, 8 Jun 2017 04:00:55 +0000
Subject: [U-Boot] u-boot-flasher fails with current u-boot
In-Reply-To: <CAPnjgZ3GhGGq8SrtXNOQyh5V7Xm2X_pfKcrrbHkyVNXcfvWCjA@mail.gmail.com>
References: <84tw3sk7sq.wl-Peter.Chubb@data61.csiro.au>
 <CAPnjgZ08jAH7OgTwQj6m5E1R26AqkwBiZEnPxHwWr==K=f9oWQ@mail.gmail.com>
 <848tl430qh.wl-Peter.Chubb@data61.csiro.au>
 <84vao7uvsz.wl-Peter.Chubb@data61.csiro.au>
 <CAPnjgZ3GhGGq8SrtXNOQyh5V7Xm2X_pfKcrrbHkyVNXcfvWCjA@mail.gmail.com>
Message-ID: <84o9tzuo09.wl-Peter.Chubb@data61.csiro.au>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

>>>>> "Simon" == Simon Glass <sjg@chromium.org> writes:


Simon> The good news is I found my Jetson-TK1 and I can repeat your
Simon> problem.

Cool.  So it's not just me (phew)
>> 
>> Tegra124 (Jetson TK1) # mmc rescan

Simon> Why are you running 'mmc rescan'? Is this because the MMC has
Simon> changed?

Any mmc command fails except 'mmc part' and 'mmc list'.  'mmc rescan'
was just one example that should work.

Tegra124 (Jetson TK1) # mmc dev
tegra_mmc_send_cmd_bounced: MMC Timeout
    Interrupt status        0x00000001
    Interrupt status enable 0xffff003b
    Interrupt signal enable 0xffff0002
    Present status          0x01fb02f6
mmc_init: -1, time 8042

Tegra124 (Jetson TK1) # mmc info                                                
mmc_init: -1, time 4

--
Dr Peter Chubb         Tel: +61 2 9490 5852      http://ts.data61.csiro.au/
Trustworthy Systems Group                           Data61 (formerly NICTA)