From: Jon Humphreys <j-humphreys@ti.com>
To: "Abbarapu, Venkatesh" <venkatesh.abbarapu@amd.com>,
Marek Vasut <marek.vasut@mailbox.org>,
"Simek, Michal" <michal.simek@amd.com>,
"u-boot@lists.denx.de" <u-boot@lists.denx.de>,
Tom Rini <trini@konsulko.com>
Cc: Andre Przywara <andre.przywara@arm.com>,
Ashok Reddy Soma <ashok.reddy.soma@amd.com>,
Jagan Teki <jagan@amarulasolutions.com>,
"Michael Walle" <mwalle@kernel.org>,
Patrice Chotard <patrice.chotard@foss.st.com>,
Patrick Delaunay <patrick.delaunay@foss.st.com>,
Pratyush Yadav <p.yadav@ti.com>,
Quentin Schulz <quentin.schulz@cherry.de>,
Sean Anderson <seanga2@gmail.com>, Simon Glass <sjg@chromium.org>,
Takahiro Kuwano <Takahiro.Kuwano@infineon.com>,
Tudor Ambarus <tudor.ambarus@linaro.org>,
"uboot-stm32@st-md-mailman.stormreply.com"
<uboot-stm32@st-md-mailman.stormreply.com>
Subject: RE: [PATCH 1/6] Revert "spi: zynq_qspi: Add parallel memories support in QSPI driver"
Date: Thu, 5 Dec 2024 22:33:45 -0600 [thread overview]
Message-ID: <8634j15t1y.fsf@udb0321960.dhcp.ti.com> (raw)
In-Reply-To: <SA1PR12MB86974AC7EFCCBD7AE99FDD3E98302@SA1PR12MB8697.namprd12.prod.outlook.com>
"Abbarapu, Venkatesh" <venkatesh.abbarapu@amd.com> writes:
> Hi,
>
>> -----Original Message-----
>> From: Jon Humphreys <j-humphreys@ti.com>
>> Sent: Thursday, December 5, 2024 9:47 AM
>> To: Marek Vasut <marek.vasut@mailbox.org>; Simek, Michal
>> <michal.simek@amd.com>; u-boot@lists.denx.de; Tom Rini <trini@konsulko.com>
>> Cc: Andre Przywara <andre.przywara@arm.com>; Ashok Reddy Soma
>> <ashok.reddy.soma@amd.com>; Jagan Teki <jagan@amarulasolutions.com>;
>> Michael Walle <mwalle@kernel.org>; Patrice Chotard
>> <patrice.chotard@foss.st.com>; Patrick Delaunay <patrick.delaunay@foss.st.com>;
>> Pratyush Yadav <p.yadav@ti.com>; Quentin Schulz <quentin.schulz@cherry.de>;
>> Sean Anderson <seanga2@gmail.com>; Simon Glass <sjg@chromium.org>;
>> Takahiro Kuwano <Takahiro.Kuwano@infineon.com>; Tudor Ambarus
>> <tudor.ambarus@linaro.org>; Abbarapu, Venkatesh
>> <venkatesh.abbarapu@amd.com>; uboot-stm32@st-md-mailman.stormreply.com
>> Subject: Re: [PATCH 1/6] Revert "spi: zynq_qspi: Add parallel memories support in
>> QSPI driver"
>>
>> Jon Humphreys <j-humphreys@ti.com> writes:
>>
>> > Marek Vasut <marek.vasut@mailbox.org> writes:
>> >
>> >> On 11/7/24 4:49 PM, Jon Humphreys wrote:
>> >>> Marek Vasut <marek.vasut@mailbox.org> writes:
>> >>>
>> >>>> On 11/6/24 10:58 PM, Jon Humphreys wrote:
>> >>>>> Marek Vasut <marek.vasut@mailbox.org> writes:
>> >>>>>
>> >>>>>> On 11/6/24 8:18 PM, Jon Humphreys wrote:
>> >>>>>>> Marek Vasut <marek.vasut@mailbox.org> writes:
>> >>>>>>>
>> >>>>>>>> On 10/23/24 10:17 AM, Michal Simek wrote:
>> >>>>>>>>>
>> >>>>>>>>>
>> >>>>>>>>> On 10/22/24 23:06, Marek Vasut wrote:
>> >>>>>>>>>> This reverts commit 1e36d34b52e7a1ebe5a2a5339d6905540f4253aa.
>> >>>>>>>>>>
>> >>>>>>>>>> This parallel/stacked support breaks basic SPI NOR support,
>> >>>>>>>>>> e.g. this no longer works:
>> >>>>>>>>>>
>> >>>>>>>>>> => sf probe && sf update 0x50000000 0 0x160000
>> >>>>>>>>>> SF: Detected s25fs512s with page size 256 Bytes, erase size
>> >>>>>>>>>> 256 KiB, total 64 MiB device 0 offset 0x0, size 0x160000 SPI
>> >>>>>>>>>> flash failed in read step
>> >>>>>>>>>
>> >>>>>>>>> Reverting everything seems to me too much. Tom has tested it
>> >>>>>>>>> on his HW and didn't see any issue. That's why better to look
>> >>>>>>>>> at code which is causing this.
>> >>>>>>>>> You are reverting everything but likely there is specific
>> >>>>>>>>> patch which is causing this. Which one is it?
>> >>>>>>>>> Which board was used for your testing? Likely we don't have access to
>> it.
>> >>>>>>>>> Is there any QEMU available which can be used for debugging?
>> >>>>>>>>
>> >>>>>>>> The testcase including the exact SPI NOR model is above.
>> >>>>>>>>
>> >>>>>>>> iMX6 with w25q16dw seems to be broken too.
>> >>>>>>>>
>> >>>>>>>> Basically every board I have access no longer has a working "sf
>> >>>>>>>> probe ; sf update" combination ... so yeah, this means this
>> >>>>>>>> patchset is fundamentally broken.
>> >>>>>>>>
>> >>>>>>>
>> >>>>>>> I can also confirm that the patch series:
>> >>>>>>>
>> >>>>>>> f8efc68b30e Merge patch series "spi-nor: Add parallel and
>> >>>>>>> stacked memories support"
>> >>>>>>>
>> >>>>>>> breaks SPI NOR on TI platforms, particularly SK-AM62 and SK-AM62P:
>> >>>>>>>
>> >>>>>>> U-Boot 2024.10-00752-gf8efc68b30e2 (Nov 06 2024 - 12:25:13
>> >>>>>>> -0600)
>> >>>>>>>
>> >>>>>>> SoC: AM62X SR1.0 HS-FS
>> >>>>>>> Model: Texas Instruments AM625 SK ...
>> >>>>>>> Hit any key to stop autoboot: 0 => sf probe && sf update
>> >>>>>>> ${loadaddr} 0x400000 0x10
>> >>>>>>> SF: Detected s28hs512t with page size 256 Bytes, erase size 256
>> >>>>>>> KiB, total 64 MiB device 0 offset 0x400000, size 0x10 SPI flash
>> >>>>>>> failed in read step =>
>> >>>>>> Sigh ... can you please test current u-boot/master and see if the
>> >>>>>> error is fixed there ?
>> >>>>>>
>> >>>>>
>> >>>>> Yes I had verified it also fails against master, although the
>> >>>>> behavior was a bit different. The .'s below are our DMA engine waiting
>> indefinitely.
>> >>>>>
>> >>>>> => sf probe && sf update ${loadaddr} 0x400000 0x10
>> >>>>> SF: Detected s28hs512t with page size 256 Bytes, erase size 256
>> >>>>> KiB, total 64 MiB device 0 offset 0x400000, size 0x10
>> >>>>> .....................................................
>> >>>>>
>> >>>>> I have not investigated further.
>> >>>>
>> >>>> Can you try and run some 'git bisect' to find out exactly which
>> >>>> commit broke your use case ? There is a bunch of fixes for the
>> >>>> worst breakage that landed recently, but clearly there is more.
>> >>>>
>> >>>> Full revert seems increasingly appealing ...
>> >>>
>> >>> commit 5d40b3d384d
>> >> So there is still something broken in that specific commit that I
>> >> missed when removing the defects ? Sigh ... can you try to narrow it down ?
>> >
>> > Hi Marek, I tried to narrow the changes in commit
>> > 5d40b3d384dc536ec26ce9b76b20b0b84749d2d1 a bit by first applying all
>> > of the changes in the .h files, and then for spi-nor-core.c, only
>> > applying changes per function. The only function change that causes
>> > errors was spi_nor_read(). With the changes in spi_nor_read() in
>> > commit
>> > 5d40b3d384dc536ec26ce9b76b20b0b84749d2d1 applied to the prior commit
>> > fbe16bc2801, did I get:
>> >
>> > => sf probe && sf update ${loadaddr} 0x400000 0x10
>> > SF: Detected s28hs512t with page size 256 Bytes, erase size 256 KiB,
>> > total 64 MiB device 0 offset 0x400000, size 0x10 SPI flash failed in
>> > read step
>> >
>>
>> Hi all. What is the status of addressing the failures introduced by this patchset? I
>> tried building from u-boot next and still see the failure.
>>
>> Marek, was the isolation of changes I performed above helpful in understanding the
>> failure?
>>
>
> Can you try by applying this change https://lore.kernel.org/u-boot/20241118090544.21956-1-venkatesh.abbarapu@amd.com/
>
Hi Venkatesh, the patch seems to remove the issue I was seeing.
Thanks
Jon
> Thanks
> Venkatesh
>> Thanks
>> Jon
>>
>> > Let me know if this helps.
>> >
>> > Jon
next prev parent reply other threads:[~2024-12-06 4:34 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-22 21:06 [PATCH 1/6] Revert "spi: zynq_qspi: Add parallel memories support in QSPI driver" Marek Vasut
2024-10-22 21:06 ` [PATCH 2/6] Revert "spi: zynqmp_gqspi: Add parallel memories support in GQSPI driver" Marek Vasut
2024-10-22 21:06 ` [PATCH 3/6] Revert "spi: spi-uclass: Read chipselect and restrict capabilities" Marek Vasut
2024-10-22 21:06 ` [PATCH 4/6] Revert "mtd: spi-nor: Add parallel and stacked memories support in read_bar and write_bar" Marek Vasut
2024-10-22 21:06 ` [PATCH 5/6] Revert "mtd: spi-nor: Add parallel memories support for read_sr and read_fsr" Marek Vasut
2024-10-22 21:06 ` [PATCH 6/6] Revert "mtd: spi-nor: Add parallel and stacked memories support" Marek Vasut
2024-11-02 13:26 ` Heinrich Schuchardt
2024-10-23 3:18 ` [PATCH 1/6] Revert "spi: zynq_qspi: Add parallel memories support in QSPI driver" Abbarapu, Venkatesh
2024-10-23 8:41 ` Marek Vasut
2024-10-23 9:07 ` Abbarapu, Venkatesh
2024-10-23 12:45 ` Marek Vasut
2024-10-23 14:14 ` Abbarapu, Venkatesh
2024-10-23 14:19 ` Marek Vasut
2024-10-23 14:25 ` Abbarapu, Venkatesh
2024-10-23 14:37 ` Abbarapu, Venkatesh
2024-10-23 15:18 ` Marek Vasut
2024-10-23 15:33 ` Abbarapu, Venkatesh
2024-10-23 15:10 ` Marek Vasut
2024-10-23 9:21 ` Michael Nazzareno Trimarchi
2024-10-23 8:17 ` Michal Simek
2024-10-23 8:38 ` Marek Vasut
2024-11-06 19:18 ` Jon Humphreys
2024-11-06 20:50 ` Marek Vasut
2024-11-06 21:58 ` Jon Humphreys
2024-11-07 0:46 ` Marek Vasut
2024-11-07 15:49 ` Jon Humphreys
2024-11-07 16:04 ` Marek Vasut
2024-11-11 14:18 ` Jon Humphreys
2024-12-05 4:16 ` Jon Humphreys
2024-12-05 4:27 ` Abbarapu, Venkatesh
2024-12-05 5:17 ` Marek Vasut
2024-12-06 4:33 ` Jon Humphreys [this message]
2024-12-06 9:46 ` Abbarapu, Venkatesh
2024-12-06 16:39 ` Tom Rini
2024-12-10 3:20 ` Abbarapu, Venkatesh
2024-12-10 8:19 ` Marek Vasut
2024-12-10 8:32 ` Abbarapu, Venkatesh
2024-12-10 11:36 ` Tudor Ambarus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8634j15t1y.fsf@udb0321960.dhcp.ti.com \
--to=j-humphreys@ti.com \
--cc=Takahiro.Kuwano@infineon.com \
--cc=andre.przywara@arm.com \
--cc=ashok.reddy.soma@amd.com \
--cc=jagan@amarulasolutions.com \
--cc=marek.vasut@mailbox.org \
--cc=michal.simek@amd.com \
--cc=mwalle@kernel.org \
--cc=p.yadav@ti.com \
--cc=patrice.chotard@foss.st.com \
--cc=patrick.delaunay@foss.st.com \
--cc=quentin.schulz@cherry.de \
--cc=seanga2@gmail.com \
--cc=sjg@chromium.org \
--cc=trini@konsulko.com \
--cc=tudor.ambarus@linaro.org \
--cc=u-boot@lists.denx.de \
--cc=uboot-stm32@st-md-mailman.stormreply.com \
--cc=venkatesh.abbarapu@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox