Re: [PATCH v2 10/10] arch: arm: dts: k3-am62-sk-u-boot: Add missing "bootph-all" property to phy_gmii_sel node

[Roger Quadros <rogerq@kernel.org>]

On 20/05/2024 09:04, Chintan Vankar wrote:
> 
> 
> On 25/04/24 18:06, Chintan Vankar wrote:
>>
>>
>> On 25/04/24 18:01, Roger Quadros wrote:
>>>
>>>
>>> On 25/04/2024 15:08, Chintan Vankar wrote:
>>>> Add "bootph-all" property to CPSW MAC's PHY node phy_gmii_sel.
>>>>
>>>> Signed-off-by: Chintan Vankar <c-vankar@ti.com>
>>>> ---
>>>>
>>>> Changes from v1 to v2:
>>>> - This patch is newly added in this series to enable CPSW MAC's PHY
>>>>    node "phy_gmii_sel". As per discussion at here:
>>>>    https://lore.kernel.org/r/20240112130127.rvvrhz7p4vmlyalh@smother/
>>>>    changes made by this patch can be dropped in the future when the
>>>>    DT-Sync is performed with am62-main.dtsi containing this change in
>>>>    the Linux DT which will match U-Boot's DT.
>>>
>>> I don't think bootph-all exists in am62-main.dtsi. It should come from
>>> board.dts
>>>
>>
>> Yes, I am having the same discussion at here:
>> https://lore.kernel.org/all/c13ac165-7cbd-4e53-914e-8c6bc28250e3@ti.com/
>>
> 
> Since I have posted patch which adds bootph-all property to
> "k3-am62x-sk-common.dtsi" at here:
> https://lore.kernel.org/r/20240430085048.3143665-1-c-vankar@ti.com/
> and it has no open comments and this series
> also does not have any open comments, so can it be merged ?

Since bootph-all is being added to k3-am62x-sk-common.dtsi don't you have to drop patch 10
from this series?

> 
>>>>
>>>>   arch/arm/dts/k3-am625-sk-u-boot.dtsi | 4 ++++
>>>>   1 file changed, 4 insertions(+)
>>>>
>>>> diff --git a/arch/arm/dts/k3-am625-sk-u-boot.dtsi b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
>>>> index fa778b0ff4..e9a1afde95 100644
>>>> --- a/arch/arm/dts/k3-am625-sk-u-boot.dtsi
>>>> +++ b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
>>>> @@ -46,3 +46,7 @@
>>>>   &cpsw_port2 {
>>>>       status = "disabled";
>>>>   };
>>>> +
>>>> +&phy_gmii_sel {
>>>> +    bootph-all;
>>>> +};
>>>

-- 
cheers,
-roger