[U-Boot] [PATCH 4/6] mvebu: select boot device at SoC level

[Baruch Siach <baruch@tkos.co.il>]

Hi Dennis,

Thanks for taking the time to look into this series.

Dennis Gilmore writes:
> this patch needs to be rebased on git master as it does not apply.

The conflict is trivial for git to handle automatically on rebase
(remove, remove). I assume 'git am -3' can do the same. Would you like
me to send v2 of this series for that?

baruch

> El lun, 18-06-2018 a las 21:56 +0300, Baruch Siach escribió:
>> Move the gdsys Controlcenter DC specific build time kwbimage.cfg
>> generation code into the mach-mvebu/ directory to be shared by all
>> 32bit
>> mvebu platforms.
>>
>> Remove board specific kwbimage.cfg files, and use the generated one
>> instead. These files are all identical, with two exceptions. Clearfog
>> and Helios4 use the sdio boot device, whereas all others use spi.
>> Update
>> the defconfigs for the exceptional boards to generate the same
>> kwbimage.cfg as before.
>>
>> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
>> ---

[...]

>> diff --git a/configs/helios4_defconfig b/configs/helios4_defconfig
>> index b72428555d37..27e661debe0b 100644
>> --- a/configs/helios4_defconfig
>> +++ b/configs/helios4_defconfig
>> @@ -5,9 +5,9 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
>>  CONFIG_SPL_LIBGENERIC_SUPPORT=y
>>  CONFIG_SYS_MALLOC_F_LEN=0x2000
>>  CONFIG_TARGET_HELIOS4=y
>> +CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC=y
>>  CONFIG_SPL_MMC_SUPPORT=y
>>  CONFIG_SPL_SERIAL_SUPPORT=y
>> -CONFIG_SPL_LIBDISK_SUPPORT=y
>>  CONFIG_SPL=y
>>  CONFIG_DEFAULT_DEVICE_TREE="armada-388-helios4"
>>  CONFIG_DEBUG_UART=y

--
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -