public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Mattijs Korpershoek <mkorpershoek@baylibre.com>
To: "A. Sverdlin" <alexander.sverdlin@siemens.com>, u-boot@lists.denx.de
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>,
	Marek Vasut <marex@denx.de>,
	Thinh Nguyen <Thinh.Nguyen@synopsys.com>,
	Nishanth Menon <nm@ti.com>, Sjoerd Simons <sjoerd@collabora.com>,
	Alexander Sverdlin <alexander.sverdlin@siemens.com>
Subject: Re: [PATCH 1/6] usb: dwc3: gadget: combine return points into a single one
Date: Tue, 14 May 2024 14:48:29 +0200	[thread overview]
Message-ID: <8734qk5zky.fsf@baylibre.com> (raw)
In-Reply-To: <20240412202611.3565052-2-alexander.sverdlin@siemens.com>

Hi Alexander,

Thank you for the patch.

On ven., avril 12, 2024 at 22:26, "A. Sverdlin" <alexander.sverdlin@siemens.com> wrote:

> From: Felipe Balbi <felipe.balbi@linux.intel.com>
>
> Upstream Linux commit c0ca324d09a0.
>
> dwc3_send_gadget_ep_cmd() had three return
> points. That becomes a pain to track when we need to
> debug something or if we need to add more code
> before returning.
>
> Let's combine all three return points into a single
> one just by introducing a local 'ret' variable.
>
> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>

Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>

> ---
>  drivers/usb/dwc3/gadget.c | 12 +++++++++---
>  1 file changed, 9 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index 69d9fe40e2f87..17c19285f1c24 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -302,6 +302,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
>  {
>  	u32			timeout = 500;
>  	u32			reg;
> +	int			ret = -EINVAL;
>  
>  	dwc3_writel(dwc->regs, DWC3_DEPCMDPAR0(ep), params->param0);
>  	dwc3_writel(dwc->regs, DWC3_DEPCMDPAR1(ep), params->param1);
> @@ -313,7 +314,8 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
>  		if (!(reg & DWC3_DEPCMD_CMDACT)) {
>  			dev_vdbg(dwc->dev, "Command Complete --> %d\n",
>  					DWC3_DEPCMD_STATUS(reg));
> -			return 0;
> +			ret = 0;
> +			break;
>  		}
>  
>  		/*
> @@ -321,11 +323,15 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
>  		 * interrupt context.
>  		 */
>  		timeout--;
> -		if (!timeout)
> -			return -ETIMEDOUT;
> +		if (!timeout) {
> +			ret = -ETIMEDOUT;
> +			break;
> +		}
>  
>  		udelay(1);
>  	} while (1);
> +
> +	return ret;
>  }
>  
>  static dma_addr_t dwc3_trb_dma_offset(struct dwc3_ep *dep,
> -- 
> 2.44.0

  reply	other threads:[~2024-05-14 12:48 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-12 20:26 [PATCH 0/6] usb: dwc3: gadget: avoid EP command timeout A. Sverdlin
2024-04-12 20:26 ` [PATCH 1/6] usb: dwc3: gadget: combine return points into a single one A. Sverdlin
2024-05-14 12:48   ` Mattijs Korpershoek [this message]
2024-04-12 20:26 ` [PATCH 2/6] usb: dwc3: gadget: clear SUSPHY bit before ep cmds A. Sverdlin
2024-05-14 12:52   ` Mattijs Korpershoek
2024-04-12 20:26 ` [PATCH 3/6] usb: dwc3: gadget: only resume USB2 PHY in <=HIGHSPEED A. Sverdlin
2024-05-14 12:55   ` Mattijs Korpershoek
2024-04-12 20:26 ` [PATCH 4/6] usb: dwc3: gadget: Check ENBLSLPM before sending ep command A. Sverdlin
2024-05-14 12:57   ` Mattijs Korpershoek
2024-04-12 20:26 ` [PATCH 5/6] usb: dwc3: gadget: properly check ep cmd A. Sverdlin
2024-05-14 13:00   ` Mattijs Korpershoek
2024-04-12 20:26 ` [PATCH 6/6] usb: dwc3: gadget: Disable GUSB2PHYCFG.SUSPHY for End Transfer A. Sverdlin
2024-04-13  6:02   ` Greg Kroah-Hartman
2024-05-14 13:05   ` Mattijs Korpershoek
2024-05-16  6:40 ` [PATCH 0/6] usb: dwc3: gadget: avoid EP command timeout Mattijs Korpershoek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8734qk5zky.fsf@baylibre.com \
    --to=mkorpershoek@baylibre.com \
    --cc=Thinh.Nguyen@synopsys.com \
    --cc=alexander.sverdlin@siemens.com \
    --cc=felipe.balbi@linux.intel.com \
    --cc=marex@denx.de \
    --cc=nm@ti.com \
    --cc=sjoerd@collabora.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox