From: Mattijs Korpershoek <mkorpershoek@baylibre.com>
To: u-boot-amlogic@groups.io, neil.armstrong@linaro.org,
Christian Hewitt <christianshewitt@gmail.com>,
Vyacheslav Bocharov <adeep@lexina.in>,
Beniamino Galvani <b.galvani@gmail.com>
Cc: u-boot-amlogic@groups.io, u-boot@lists.denx.de,
Neil Armstrong <neil.armstrong@linaro.org>,
Neil Armstrong <neil.armstrong@linaro.org>
Subject: Re: [PATCH 0/4] ARM: meson: Add boot over DFU RAM as an USB boot step
Date: Tue, 24 Oct 2023 09:05:05 +0200 [thread overview]
Message-ID: <874jigsdpa.fsf@baylibre.com> (raw)
In-Reply-To: <20231023-usb-dfu-boot-v1-0-df9d121c67c1@linaro.org>
Hi Neil,
Thank you for the series.
On lun., oct. 23, 2023 at 14:41, "Neil Armstrong" <neil.armstrong@linaro.org> wrote:
> Add boot over DFU RAM as an alternate to running script at
> a fixed address like done today.
>
> The main culprit is that it's not possible to do that
> on G12A/SM1 platforms due to changes in the USB boot protocol.
>
> With this, U-Boot will present a DFU device with a ram slot where
> the Host could write a fitImage or legacy U-Boot image, then with the
> detach command boot will continue trying to boot the uploaded image.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
I did a simple boot to aosp/main test on vim3 and also used fastboot to
flash the bootloader.
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # on vim3
> ---
> Neil Armstrong (4):
> ARM: meson: enable FIT with LEGACY_IMAGE_FORMAT on all configs
> configs: meson64: declare addr out of EXTRA_ENV_SETTINGS
> configs: meson64: add alternate USB DFU boot target
> ARM: meson: enable USB DFU + RAM on Amlogic boards with USB Gadget
>
> configs/ad401_defconfig | 2 ++
> configs/bananapi-cm4-cm4io_defconfig | 6 ++++
> configs/bananapi-m2-pro_defconfig | 6 ++++
> configs/bananapi-m2s_defconfig | 6 ++++
> configs/bananapi-m5_defconfig | 6 ++++
> configs/beelink-gsking-x_defconfig | 6 ++++
> configs/beelink-gt1-ultimate_defconfig | 6 ++++
> configs/beelink-gtking_defconfig | 6 ++++
> configs/beelink-gtkingpro_defconfig | 6 ++++
> configs/jethub_j100_defconfig | 6 ++++
> configs/jethub_j80_defconfig | 6 ++++
> configs/khadas-vim2_defconfig | 6 ++++
> configs/khadas-vim3_android_ab_defconfig | 4 +++
> configs/khadas-vim3_android_defconfig | 4 +++
> configs/khadas-vim3_defconfig | 6 ++++
> configs/khadas-vim3l_android_ab_defconfig | 4 +++
> configs/khadas-vim3l_android_defconfig | 4 +++
> configs/khadas-vim3l_defconfig | 6 ++++
> configs/khadas-vim_defconfig | 6 ++++
> configs/libretech-ac_defconfig | 6 ++++
> configs/libretech-cc_defconfig | 6 ++++
> configs/libretech-cc_v2_defconfig | 6 ++++
> configs/libretech-s905d-pc_defconfig | 6 ++++
> configs/libretech-s912-pc_defconfig | 6 ++++
> configs/nanopi-k2_defconfig | 4 +++
> configs/odroid-c2_defconfig | 4 +++
> configs/odroid-c4_defconfig | 6 ++++
> configs/odroid-go-ultra_defconfig | 6 ++++
> configs/odroid-hc4_defconfig | 6 ++++
> configs/odroid-n2_defconfig | 6 ++++
> configs/odroid-n2l_defconfig | 6 ++++
> configs/p200_defconfig | 4 +++
> configs/p201_defconfig | 4 +++
> configs/p212_defconfig | 4 +++
> configs/radxa-zero2_defconfig | 6 ++++
> configs/radxa-zero_defconfig | 6 ++++
> configs/s400_defconfig | 6 ++++
> configs/sei510_defconfig | 6 ++++
> configs/sei610_defconfig | 6 ++++
> configs/u200_defconfig | 6 ++++
> configs/videostrong-kii-pro_defconfig | 4 +++
> configs/wetek-core2_defconfig | 6 ++++
> configs/wetek-hub_defconfig | 4 +++
> configs/wetek-play2_defconfig | 4 +++
> include/configs/meson64.h | 49 ++++++++++++++++++++++++++-----
> 45 files changed, 278 insertions(+), 7 deletions(-)
> ---
> base-commit: 9a0cf3993f71043ba08c315572c54622de42d447
> change-id: 20231023-usb-dfu-boot-f47849f9fb34
>
> Best regards,
> --
> Neil Armstrong <neil.armstrong@linaro.org>
>
>
>
> -=-=-=-=-=-=-=-=-=-=-=-
> Groups.io Links: You receive all messages sent to this group.
> View/Reply Online (#1789): https://groups.io/g/u-boot-amlogic/message/1789
> Mute This Topic: https://groups.io/mt/102134207/1991006
> Group Owner: u-boot-amlogic+owner@groups.io
> Unsubscribe: https://groups.io/g/u-boot-amlogic/leave/9114030/1991006/1716920881/xyzzy [mkorpershoek@baylibre.com]
> -=-=-=-=-=-=-=-=-=-=-=-
next prev parent reply other threads:[~2023-10-24 7:05 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-23 12:41 [PATCH 0/4] ARM: meson: Add boot over DFU RAM as an USB boot step Neil Armstrong
2023-10-23 12:41 ` [PATCH 1/4] ARM: meson: enable FIT with LEGACY_IMAGE_FORMAT on all configs Neil Armstrong
2023-10-23 12:41 ` [PATCH 2/4] configs: meson64: declare addr out of EXTRA_ENV_SETTINGS Neil Armstrong
2023-10-23 12:41 ` [PATCH 3/4] configs: meson64: add alternate USB DFU boot target Neil Armstrong
2023-10-23 12:41 ` [PATCH 4/4] ARM: meson: enable USB DFU + RAM on Amlogic boards with USB Gadget Neil Armstrong
2023-10-24 7:05 ` Mattijs Korpershoek [this message]
2023-10-26 15:39 ` [PATCH 0/4] ARM: meson: Add boot over DFU RAM as an USB boot step Neil Armstrong
-- strict thread matches above, loose matches on Subject: below --
2023-10-23 13:04 Ferass El Hafidi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=874jigsdpa.fsf@baylibre.com \
--to=mkorpershoek@baylibre.com \
--cc=adeep@lexina.in \
--cc=b.galvani@gmail.com \
--cc=christianshewitt@gmail.com \
--cc=neil.armstrong@linaro.org \
--cc=u-boot-amlogic@groups.io \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox