* [U-Boot] [PATCH v2 1/5] rockchip: rk3328: add SPL board file support
2019-05-19 12:10 ` [U-Boot] [PATCH v2 0/5] Add initial support for Pine64 Rock64 board Matwey V. Kornilov
@ 2019-05-19 12:10 ` Matwey V. Kornilov
2019-05-30 1:13 ` Kever Yang
2019-05-19 12:10 ` [U-Boot] [PATCH v2 2/5] rockchip: rk3328: add SPL support Matwey V. Kornilov
` (6 subsequent siblings)
7 siblings, 1 reply; 52+ messages in thread
From: Matwey V. Kornilov @ 2019-05-19 12:10 UTC (permalink / raw)
To: u-boot
From: Kever Yang <kever.yang@rock-chips.com>
rk3328 SPL is locate at dram, so do not have strict size limit,
suppose to enable storage media controller driver, load ATF and
U-Boot, then boot into ATF.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
[cherry picked from https://github.com/rockchip-linux/u-boot/commit/4ebe3968b683190cb8e5741aa7227b4fa7497874 with minor modifications]
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
---
arch/arm/mach-rockchip/Makefile | 1 +
arch/arm/mach-rockchip/rk3328-board-spl.c | 59 +++++++++++++++++++++++++++++++
2 files changed, 60 insertions(+)
create mode 100644 arch/arm/mach-rockchip/rk3328-board-spl.c
diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile
index 846c82d70a..23760a959a 100644
--- a/arch/arm/mach-rockchip/Makefile
+++ b/arch/arm/mach-rockchip/Makefile
@@ -18,6 +18,7 @@ obj-spl-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o
obj-spl-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board-spl.o
obj-spl-$(CONFIG_ROCKCHIP_RK322X) += rk322x-board-spl.o spl-boot-order.o
obj-spl-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board-spl.o
+obj-spl-$(CONFIG_ROCKCHIP_RK3328) += rk3328-board-spl.o
obj-spl-$(CONFIG_ROCKCHIP_RK3368) += rk3368-board-spl.o spl-boot-order.o
obj-spl-$(CONFIG_ROCKCHIP_RK3399) += rk3399-board-spl.o spl-boot-order.o
diff --git a/arch/arm/mach-rockchip/rk3328-board-spl.c b/arch/arm/mach-rockchip/rk3328-board-spl.c
new file mode 100644
index 0000000000..7f49d056a0
--- /dev/null
+++ b/arch/arm/mach-rockchip/rk3328-board-spl.c
@@ -0,0 +1,59 @@
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <debug_uart.h>
+#include <dm.h>
+#include <dm/pinctrl.h>
+#include <ram.h>
+#include <spl.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void board_debug_uart_init(void)
+{
+}
+
+void board_init_f(ulong dummy)
+{
+ struct udevice *dev;
+ int ret;
+
+ ret = spl_early_init();
+ if (ret) {
+ debug("spl_early_init() failed: %d\n", ret);
+ hang();
+ }
+
+ preloader_console_init();
+
+ ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+ if (ret) {
+ debug("DRAM init failed: %d\n", ret);
+ return;
+ }
+}
+
+u32 spl_boot_mode(const u32 boot_device)
+{
+ return MMCSD_MODE_RAW;
+}
+
+u32 spl_boot_device(void)
+{
+ return BOOT_DEVICE_MMC1;
+}
+
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
+{
+ /* Just empty function now - can't decide what to choose */
+ debug("%s: %s\n", __func__, name);
+
+ return 0;
+}
+#endif
--
2.16.4
^ permalink raw reply related [flat|nested] 52+ messages in thread* [U-Boot] [PATCH v2 1/5] rockchip: rk3328: add SPL board file support
2019-05-19 12:10 ` [U-Boot] [PATCH v2 1/5] rockchip: rk3328: add SPL board file support Matwey V. Kornilov
@ 2019-05-30 1:13 ` Kever Yang
0 siblings, 0 replies; 52+ messages in thread
From: Kever Yang @ 2019-05-30 1:13 UTC (permalink / raw)
To: u-boot
On 05/19/2019 08:10 PM, Matwey V. Kornilov wrote:
> From: Kever Yang <kever.yang@rock-chips.com>
>
> rk3328 SPL is locate at dram, so do not have strict size limit,
> suppose to enable storage media controller driver, load ATF and
> U-Boot, then boot into ATF.
>
> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
> [cherry picked from https://github.com/rockchip-linux/u-boot/commit/4ebe3968b683190cb8e5741aa7227b4fa7497874 with minor modifications]
> Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Thanks,
- Kever
> ---
> arch/arm/mach-rockchip/Makefile | 1 +
> arch/arm/mach-rockchip/rk3328-board-spl.c | 59 +++++++++++++++++++++++++++++++
> 2 files changed, 60 insertions(+)
> create mode 100644 arch/arm/mach-rockchip/rk3328-board-spl.c
>
> diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile
> index 846c82d70a..23760a959a 100644
> --- a/arch/arm/mach-rockchip/Makefile
> +++ b/arch/arm/mach-rockchip/Makefile
> @@ -18,6 +18,7 @@ obj-spl-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o
> obj-spl-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board-spl.o
> obj-spl-$(CONFIG_ROCKCHIP_RK322X) += rk322x-board-spl.o spl-boot-order.o
> obj-spl-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board-spl.o
> +obj-spl-$(CONFIG_ROCKCHIP_RK3328) += rk3328-board-spl.o
> obj-spl-$(CONFIG_ROCKCHIP_RK3368) += rk3368-board-spl.o spl-boot-order.o
> obj-spl-$(CONFIG_ROCKCHIP_RK3399) += rk3399-board-spl.o spl-boot-order.o
>
> diff --git a/arch/arm/mach-rockchip/rk3328-board-spl.c b/arch/arm/mach-rockchip/rk3328-board-spl.c
> new file mode 100644
> index 0000000000..7f49d056a0
> --- /dev/null
> +++ b/arch/arm/mach-rockchip/rk3328-board-spl.c
> @@ -0,0 +1,59 @@
> +/*
> + * (C) Copyright 2016 Rockchip Electronics Co., Ltd
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <debug_uart.h>
> +#include <dm.h>
> +#include <dm/pinctrl.h>
> +#include <ram.h>
> +#include <spl.h>
> +#include <asm/io.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +void board_debug_uart_init(void)
> +{
> +}
> +
> +void board_init_f(ulong dummy)
> +{
> + struct udevice *dev;
> + int ret;
> +
> + ret = spl_early_init();
> + if (ret) {
> + debug("spl_early_init() failed: %d\n", ret);
> + hang();
> + }
> +
> + preloader_console_init();
> +
> + ret = uclass_get_device(UCLASS_RAM, 0, &dev);
> + if (ret) {
> + debug("DRAM init failed: %d\n", ret);
> + return;
> + }
> +}
> +
> +u32 spl_boot_mode(const u32 boot_device)
> +{
> + return MMCSD_MODE_RAW;
> +}
> +
> +u32 spl_boot_device(void)
> +{
> + return BOOT_DEVICE_MMC1;
> +}
> +
> +#ifdef CONFIG_SPL_LOAD_FIT
> +int board_fit_config_name_match(const char *name)
> +{
> + /* Just empty function now - can't decide what to choose */
> + debug("%s: %s\n", __func__, name);
> +
> + return 0;
> +}
> +#endif
^ permalink raw reply [flat|nested] 52+ messages in thread
* [U-Boot] [PATCH v2 2/5] rockchip: rk3328: add SPL support
2019-05-19 12:10 ` [U-Boot] [PATCH v2 0/5] Add initial support for Pine64 Rock64 board Matwey V. Kornilov
2019-05-19 12:10 ` [U-Boot] [PATCH v2 1/5] rockchip: rk3328: add SPL board file support Matwey V. Kornilov
@ 2019-05-19 12:10 ` Matwey V. Kornilov
2019-05-30 1:13 ` Kever Yang
2019-05-19 12:10 ` [U-Boot] [PATCH v2 3/5] rockchip: Kconfig: enable SPL support for rk3328 Matwey V. Kornilov
` (5 subsequent siblings)
7 siblings, 1 reply; 52+ messages in thread
From: Matwey V. Kornilov @ 2019-05-19 12:10 UTC (permalink / raw)
To: u-boot
From: Kever Yang <kever.yang@rock-chips.com>
Add SPL support for rk3328, default with of-platdata enabled.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
[cherry picked from https://github.com/rockchip-linux/u-boot/commit/cb2b7a1bc75ebb116b1eb9b0ae0223e84d86fc4b with minor modifications]
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
---
include/configs/rk3328_common.h | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/include/configs/rk3328_common.h b/include/configs/rk3328_common.h
index 71aad7029a..2a81c803b6 100644
--- a/include/configs/rk3328_common.h
+++ b/include/configs/rk3328_common.h
@@ -16,6 +16,10 @@
#define CONFIG_SYS_INIT_SP_ADDR 0x00300000
#define CONFIG_SYS_LOAD_ADDR 0x00800800
+#define CONFIG_SPL_STACK 0x00400000
+#define CONFIG_SPL_MAX_SIZE 0x100000
+#define CONFIG_SPL_BSS_START_ADDR 0x2000000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x2000
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */
--
2.16.4
^ permalink raw reply related [flat|nested] 52+ messages in thread* [U-Boot] [PATCH v2 2/5] rockchip: rk3328: add SPL support
2019-05-19 12:10 ` [U-Boot] [PATCH v2 2/5] rockchip: rk3328: add SPL support Matwey V. Kornilov
@ 2019-05-30 1:13 ` Kever Yang
0 siblings, 0 replies; 52+ messages in thread
From: Kever Yang @ 2019-05-30 1:13 UTC (permalink / raw)
To: u-boot
On 05/19/2019 08:10 PM, Matwey V. Kornilov wrote:
> From: Kever Yang <kever.yang@rock-chips.com>
>
> Add SPL support for rk3328, default with of-platdata enabled.
>
> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
> [cherry picked from https://github.com/rockchip-linux/u-boot/commit/cb2b7a1bc75ebb116b1eb9b0ae0223e84d86fc4b with minor modifications]
> Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Thanks,
- Kever
> ---
> include/configs/rk3328_common.h | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/include/configs/rk3328_common.h b/include/configs/rk3328_common.h
> index 71aad7029a..2a81c803b6 100644
> --- a/include/configs/rk3328_common.h
> +++ b/include/configs/rk3328_common.h
> @@ -16,6 +16,10 @@
>
> #define CONFIG_SYS_INIT_SP_ADDR 0x00300000
> #define CONFIG_SYS_LOAD_ADDR 0x00800800
> +#define CONFIG_SPL_STACK 0x00400000
> +#define CONFIG_SPL_MAX_SIZE 0x100000
> +#define CONFIG_SPL_BSS_START_ADDR 0x2000000
> +#define CONFIG_SPL_BSS_MAX_SIZE 0x2000
>
> #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */
>
^ permalink raw reply [flat|nested] 52+ messages in thread
* [U-Boot] [PATCH v2 3/5] rockchip: Kconfig: enable SPL support for rk3328
2019-05-19 12:10 ` [U-Boot] [PATCH v2 0/5] Add initial support for Pine64 Rock64 board Matwey V. Kornilov
2019-05-19 12:10 ` [U-Boot] [PATCH v2 1/5] rockchip: rk3328: add SPL board file support Matwey V. Kornilov
2019-05-19 12:10 ` [U-Boot] [PATCH v2 2/5] rockchip: rk3328: add SPL support Matwey V. Kornilov
@ 2019-05-19 12:10 ` Matwey V. Kornilov
2019-05-30 1:24 ` Kever Yang
2019-05-19 12:10 ` [U-Boot] [PATCH v2 4/5] rockchip: dts: rk3328: add rk3328-rock64.dts Matwey V. Kornilov
` (4 subsequent siblings)
7 siblings, 1 reply; 52+ messages in thread
From: Matwey V. Kornilov @ 2019-05-19 12:10 UTC (permalink / raw)
To: u-boot
From: Kever Yang <kever.yang@rock-chips.com>
Enable SPL support and some related option in Kconfig.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
[cherry picked from https://github.com/rockchip-linux/u-boot/commit/430b01462bf3f24aaf7920ae2587a6943c39ab5d with minor modifications]
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
---
arch/arm/mach-rockchip/Kconfig | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index c05e3c3f48..3e38344b50 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -109,6 +109,13 @@ endif
config ROCKCHIP_RK3328
bool "Support Rockchip RK3328"
select ARM64
+ select SUPPORT_SPL
+ select SPL
+ imply SPL_SERIAL_SUPPORT
+ imply SPL_SEPARATE_BSS
+ select ENABLE_ARM_SOC_BOOT0_HOOK
+ select DEBUG_UART_BOARD_INIT
+ select SYS_NS16550
help
The Rockchip RK3328 is a ARM-based SoC with a quad-core Cortex-A53.
including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two
--
2.16.4
^ permalink raw reply related [flat|nested] 52+ messages in thread* [U-Boot] [PATCH v2 3/5] rockchip: Kconfig: enable SPL support for rk3328
2019-05-19 12:10 ` [U-Boot] [PATCH v2 3/5] rockchip: Kconfig: enable SPL support for rk3328 Matwey V. Kornilov
@ 2019-05-30 1:24 ` Kever Yang
0 siblings, 0 replies; 52+ messages in thread
From: Kever Yang @ 2019-05-30 1:24 UTC (permalink / raw)
To: u-boot
On 05/19/2019 08:10 PM, Matwey V. Kornilov wrote:
> From: Kever Yang <kever.yang@rock-chips.com>
>
> Enable SPL support and some related option in Kconfig.
>
> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
> [cherry picked from https://github.com/rockchip-linux/u-boot/commit/430b01462bf3f24aaf7920ae2587a6943c39ab5d with minor modifications]
> Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Thanks,
- Kever
> ---
> arch/arm/mach-rockchip/Kconfig | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
> index c05e3c3f48..3e38344b50 100644
> --- a/arch/arm/mach-rockchip/Kconfig
> +++ b/arch/arm/mach-rockchip/Kconfig
> @@ -109,6 +109,13 @@ endif
> config ROCKCHIP_RK3328
> bool "Support Rockchip RK3328"
> select ARM64
> + select SUPPORT_SPL
> + select SPL
> + imply SPL_SERIAL_SUPPORT
> + imply SPL_SEPARATE_BSS
> + select ENABLE_ARM_SOC_BOOT0_HOOK
> + select DEBUG_UART_BOARD_INIT
> + select SYS_NS16550
> help
> The Rockchip RK3328 is a ARM-based SoC with a quad-core Cortex-A53.
> including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two
^ permalink raw reply [flat|nested] 52+ messages in thread
* [U-Boot] [PATCH v2 4/5] rockchip: dts: rk3328: add rk3328-rock64.dts
2019-05-19 12:10 ` [U-Boot] [PATCH v2 0/5] Add initial support for Pine64 Rock64 board Matwey V. Kornilov
` (2 preceding siblings ...)
2019-05-19 12:10 ` [U-Boot] [PATCH v2 3/5] rockchip: Kconfig: enable SPL support for rk3328 Matwey V. Kornilov
@ 2019-05-19 12:10 ` Matwey V. Kornilov
2019-05-30 1:25 ` Kever Yang
2019-05-19 12:10 ` [U-Boot] [PATCH v2 5/5] rockchip: rk3328: add rock64-rk3328_defconfig Matwey V. Kornilov
` (3 subsequent siblings)
7 siblings, 1 reply; 52+ messages in thread
From: Matwey V. Kornilov @ 2019-05-19 12:10 UTC (permalink / raw)
To: u-boot
rk3328-rock64.dts has been taken from Linux kernel commit
cff6d1d6f88b ("arm64: dts: rockchip: enable HS200 for eMMC on rock64")
with minor modifications (drop nodes not known by rk3328.dtsi).
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
---
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/rk3328-rock64-u-boot.dtsi | 34 ++++
arch/arm/dts/rk3328-rock64.dts | 294 +++++++++++++++++++++++++++++++++
3 files changed, 330 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/dts/rk3328-rock64-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3328-rock64.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 0ec7bc987d..42ee1fb654 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -93,7 +93,8 @@ dtb-$(CONFIG_ROCKCHIP_RK3288) += \
rk3288-vyasa.dtb
dtb-$(CONFIG_ROCKCHIP_RK3328) += \
- rk3328-evb.dtb
+ rk3328-evb.dtb \
+ rk3328-rock64.dtb
dtb-$(CONFIG_ROCKCHIP_RK3368) += \
rk3368-lion.dtb \
diff --git a/arch/arm/dts/rk3328-rock64-u-boot.dtsi b/arch/arm/dts/rk3328-rock64-u-boot.dtsi
new file mode 100644
index 0000000000..b077436cbc
--- /dev/null
+++ b/arch/arm/dts/rk3328-rock64-u-boot.dtsi
@@ -0,0 +1,34 @@
+/*
+ * (C) Copyright 2018 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/ {
+ aliases {
+ mmc0 = &emmc;
+ mmc1 = &sdmmc;
+ };
+
+ chosen {
+ u-boot,spl-boot-order = &emmc, &sdmmc;
+ };
+};
+
+&cru {
+ u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+ u-boot,dm-pre-reloc;
+};
+
+&emmc {
+ u-boot,dm-pre-reloc;
+ fifo-mode;
+};
+
+&sdmmc {
+ u-boot,dm-pre-reloc;
+ fifo-mode;
+};
diff --git a/arch/arm/dts/rk3328-rock64.dts b/arch/arm/dts/rk3328-rock64.dts
new file mode 100644
index 0000000000..7bcc53fcce
--- /dev/null
+++ b/arch/arm/dts/rk3328-rock64.dts
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 PINE64
+ */
+
+/dts-v1/;
+#include "rk3328.dtsi"
+
+/ {
+ model = "Pine64 Rock64";
+ compatible = "pine64,rock64", "rockchip,rk3328";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ gmac_clkin: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "gmac_clkin";
+ #clock-cells = <0>;
+ };
+
+ vcc_sd: sdmmc-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0m1_gpio>;
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_io>;
+ };
+
+ vcc_host_5v: vcc-host-5v-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb30_host_drv>;
+ regulator-name = "vcc_host_5v";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb20_host_drv>;
+ regulator-name = "vcc_host1_5v";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+ vmmc-supply = <&vcc_io>;
+ vqmmc-supply = <&vcc18_emmc>;
+ status = "okay";
+};
+
+&gmac2io {
+ assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+ assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
+ clock_in_out = "input";
+ phy-supply = <&vcc_io>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmiim1_pins>;
+ snps,force_thresh_dma_mode;
+ snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x24>;
+ rx_delay = <0x18>;
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ rk805: rk805 at 18 {
+ compatible = "rockchip,rk805";
+ reg = <0x18>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk805-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc5-supply = <&vcc_io>;
+ vcc6-supply = <&vcc_sys>;
+
+ regulators {
+ vdd_logic: DCDC_REG1 {
+ regulator-name = "vdd_logic";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1450000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vdd_arm: DCDC_REG2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1450000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-name = "vcc_io";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_18: LDO_REG1 {
+ regulator-name = "vdd_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc18_emmc: LDO_REG2 {
+ regulator-name = "vcc_18emmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-name = "vdd_10";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+ };
+ };
+};
+
+&io_domains {
+ status = "okay";
+
+ vccio1-supply = <&vcc_io>;
+ vccio2-supply = <&vcc18_emmc>;
+ vccio3-supply = <&vcc_io>;
+ vccio4-supply = <&vcc_18>;
+ vccio5-supply = <&vcc_io>;
+ vccio6-supply = <&vcc_io>;
+ pmuio-supply = <&vcc_io>;
+};
+
+&pinctrl {
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb2 {
+ usb20_host_drv: usb20-host-drv {
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb3 {
+ usb30_host_drv: usb30-host-drv {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+ vmmc-supply = <&vcc_sd>;
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ spiflash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+
+ /* maximum speed for Rockchip SPI */
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb20_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
--
2.16.4
^ permalink raw reply related [flat|nested] 52+ messages in thread* [U-Boot] [PATCH v2 4/5] rockchip: dts: rk3328: add rk3328-rock64.dts
2019-05-19 12:10 ` [U-Boot] [PATCH v2 4/5] rockchip: dts: rk3328: add rk3328-rock64.dts Matwey V. Kornilov
@ 2019-05-30 1:25 ` Kever Yang
0 siblings, 0 replies; 52+ messages in thread
From: Kever Yang @ 2019-05-30 1:25 UTC (permalink / raw)
To: u-boot
On 05/19/2019 08:10 PM, Matwey V. Kornilov wrote:
> rk3328-rock64.dts has been taken from Linux kernel commit
>
> cff6d1d6f88b ("arm64: dts: rockchip: enable HS200 for eMMC on rock64")
>
> with minor modifications (drop nodes not known by rk3328.dtsi).
>
> Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Thanks,
- Kever
> ---
> arch/arm/dts/Makefile | 3 +-
> arch/arm/dts/rk3328-rock64-u-boot.dtsi | 34 ++++
> arch/arm/dts/rk3328-rock64.dts | 294 +++++++++++++++++++++++++++++++++
> 3 files changed, 330 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/dts/rk3328-rock64-u-boot.dtsi
> create mode 100644 arch/arm/dts/rk3328-rock64.dts
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 0ec7bc987d..42ee1fb654 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -93,7 +93,8 @@ dtb-$(CONFIG_ROCKCHIP_RK3288) += \
> rk3288-vyasa.dtb
>
> dtb-$(CONFIG_ROCKCHIP_RK3328) += \
> - rk3328-evb.dtb
> + rk3328-evb.dtb \
> + rk3328-rock64.dtb
>
> dtb-$(CONFIG_ROCKCHIP_RK3368) += \
> rk3368-lion.dtb \
> diff --git a/arch/arm/dts/rk3328-rock64-u-boot.dtsi b/arch/arm/dts/rk3328-rock64-u-boot.dtsi
> new file mode 100644
> index 0000000000..b077436cbc
> --- /dev/null
> +++ b/arch/arm/dts/rk3328-rock64-u-boot.dtsi
> @@ -0,0 +1,34 @@
> +/*
> + * (C) Copyright 2018 Rockchip Electronics Co., Ltd
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +/ {
> + aliases {
> + mmc0 = &emmc;
> + mmc1 = &sdmmc;
> + };
> +
> + chosen {
> + u-boot,spl-boot-order = &emmc, &sdmmc;
> + };
> +};
> +
> +&cru {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&uart2 {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&emmc {
> + u-boot,dm-pre-reloc;
> + fifo-mode;
> +};
> +
> +&sdmmc {
> + u-boot,dm-pre-reloc;
> + fifo-mode;
> +};
> diff --git a/arch/arm/dts/rk3328-rock64.dts b/arch/arm/dts/rk3328-rock64.dts
> new file mode 100644
> index 0000000000..7bcc53fcce
> --- /dev/null
> +++ b/arch/arm/dts/rk3328-rock64.dts
> @@ -0,0 +1,294 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2017 PINE64
> + */
> +
> +/dts-v1/;
> +#include "rk3328.dtsi"
> +
> +/ {
> + model = "Pine64 Rock64";
> + compatible = "pine64,rock64", "rockchip,rk3328";
> +
> + chosen {
> + stdout-path = "serial2:1500000n8";
> + };
> +
> + gmac_clkin: external-gmac-clock {
> + compatible = "fixed-clock";
> + clock-frequency = <125000000>;
> + clock-output-names = "gmac_clkin";
> + #clock-cells = <0>;
> + };
> +
> + vcc_sd: sdmmc-regulator {
> + compatible = "regulator-fixed";
> + gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdmmc0m1_gpio>;
> + regulator-name = "vcc_sd";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + vin-supply = <&vcc_io>;
> + };
> +
> + vcc_host_5v: vcc-host-5v-regulator {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&usb30_host_drv>;
> + regulator-name = "vcc_host_5v";
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc_sys>;
> + };
> +
> + vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&usb20_host_drv>;
> + regulator-name = "vcc_host1_5v";
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc_sys>;
> + };
> +
> + vcc_sys: vcc-sys {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + };
> +};
> +
> +&cpu0 {
> + cpu-supply = <&vdd_arm>;
> +};
> +
> +&cpu1 {
> + cpu-supply = <&vdd_arm>;
> +};
> +
> +&cpu2 {
> + cpu-supply = <&vdd_arm>;
> +};
> +
> +&cpu3 {
> + cpu-supply = <&vdd_arm>;
> +};
> +
> +&emmc {
> + bus-width = <8>;
> + cap-mmc-highspeed;
> + mmc-hs200-1_8v;
> + non-removable;
> + pinctrl-names = "default";
> + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
> + vmmc-supply = <&vcc_io>;
> + vqmmc-supply = <&vcc18_emmc>;
> + status = "okay";
> +};
> +
> +&gmac2io {
> + assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
> + assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
> + clock_in_out = "input";
> + phy-supply = <&vcc_io>;
> + phy-mode = "rgmii";
> + pinctrl-names = "default";
> + pinctrl-0 = <&rgmiim1_pins>;
> + snps,force_thresh_dma_mode;
> + snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
> + snps,reset-active-low;
> + snps,reset-delays-us = <0 10000 50000>;
> + tx_delay = <0x24>;
> + rx_delay = <0x18>;
> + status = "okay";
> +};
> +
> +&i2c1 {
> + status = "okay";
> +
> + rk805: rk805 at 18 {
> + compatible = "rockchip,rk805";
> + reg = <0x18>;
> + interrupt-parent = <&gpio2>;
> + interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
> + #clock-cells = <1>;
> + clock-output-names = "xin32k", "rk805-clkout2";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pmic_int_l>;
> + rockchip,system-power-controller;
> + wakeup-source;
> +
> + vcc1-supply = <&vcc_sys>;
> + vcc2-supply = <&vcc_sys>;
> + vcc3-supply = <&vcc_sys>;
> + vcc4-supply = <&vcc_sys>;
> + vcc5-supply = <&vcc_io>;
> + vcc6-supply = <&vcc_sys>;
> +
> + regulators {
> + vdd_logic: DCDC_REG1 {
> + regulator-name = "vdd_logic";
> + regulator-min-microvolt = <712500>;
> + regulator-max-microvolt = <1450000>;
> + regulator-ramp-delay = <12500>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1000000>;
> + };
> + };
> +
> + vdd_arm: DCDC_REG2 {
> + regulator-name = "vdd_arm";
> + regulator-min-microvolt = <712500>;
> + regulator-max-microvolt = <1450000>;
> + regulator-ramp-delay = <12500>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <950000>;
> + };
> + };
> +
> + vcc_ddr: DCDC_REG3 {
> + regulator-name = "vcc_ddr";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vcc_io: DCDC_REG4 {
> + regulator-name = "vcc_io";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + vcc_18: LDO_REG1 {
> + regulator-name = "vdd_18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vcc18_emmc: LDO_REG2 {
> + regulator-name = "vcc_18emmc";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vdd_10: LDO_REG3 {
> + regulator-name = "vdd_10";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1000000>;
> + };
> + };
> + };
> + };
> +};
> +
> +&io_domains {
> + status = "okay";
> +
> + vccio1-supply = <&vcc_io>;
> + vccio2-supply = <&vcc18_emmc>;
> + vccio3-supply = <&vcc_io>;
> + vccio4-supply = <&vcc_18>;
> + vccio5-supply = <&vcc_io>;
> + vccio6-supply = <&vcc_io>;
> + pmuio-supply = <&vcc_io>;
> +};
> +
> +&pinctrl {
> + pmic {
> + pmic_int_l: pmic-int-l {
> + rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +
> + usb2 {
> + usb20_host_drv: usb20-host-drv {
> + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + usb3 {
> + usb30_host_drv: usb30-host-drv {
> + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +};
> +
> +&sdmmc {
> + bus-width = <4>;
> + cap-mmc-highspeed;
> + cap-sd-highspeed;
> + disable-wp;
> + max-frequency = <150000000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
> + vmmc-supply = <&vcc_sd>;
> + status = "okay";
> +};
> +
> +&spi0 {
> + status = "okay";
> +
> + spiflash at 0 {
> + compatible = "jedec,spi-nor";
> + reg = <0>;
> +
> + /* maximum speed for Rockchip SPI */
> + spi-max-frequency = <50000000>;
> + };
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> +
> +&usb20_otg {
> + dr_mode = "host";
> + status = "okay";
> +};
> +
> +&usb_host0_ehci {
> + status = "okay";
> +};
> +
> +&usb_host0_ohci {
> + status = "okay";
> +};
^ permalink raw reply [flat|nested] 52+ messages in thread
* [U-Boot] [PATCH v2 5/5] rockchip: rk3328: add rock64-rk3328_defconfig
2019-05-19 12:10 ` [U-Boot] [PATCH v2 0/5] Add initial support for Pine64 Rock64 board Matwey V. Kornilov
` (3 preceding siblings ...)
2019-05-19 12:10 ` [U-Boot] [PATCH v2 4/5] rockchip: dts: rk3328: add rk3328-rock64.dts Matwey V. Kornilov
@ 2019-05-19 12:10 ` Matwey V. Kornilov
2019-05-20 17:11 ` Vagrant Cascadian
2019-05-30 1:26 ` Kever Yang
2019-05-30 1:23 ` [U-Boot] [PATCH v2 0/5] Add initial support for Pine64 Rock64 board Kever Yang
` (2 subsequent siblings)
7 siblings, 2 replies; 52+ messages in thread
From: Matwey V. Kornilov @ 2019-05-19 12:10 UTC (permalink / raw)
To: u-boot
The ROCK64 is a credit card size SBC based on Rockchip RK3328
Quad-Core ARM Cortex A53.
This series allow building u-boot SPL and u-boot.itb for Rock64
board. The proprietary TPL is stil required for deploy:
./tools/mkimage -n rk3328 -T rksd \
-d ./rkbin/bin/rk33/rk3328_ddr_333MHz_v1.14.bin idbloader.img
cat ./spl/u-boot-spl.bin >> idbloader.img
dd if=idbloader.img of=/dev/sdcard seek=64 conv=notrunc
dd if=u-boot.itb of=/dev/sdcard seek=16384 conv=notrunc
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
---
configs/rock64-rk3328_defconfig | 91 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 91 insertions(+)
create mode 100644 configs/rock64-rk3328_defconfig
diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig
new file mode 100644
index 0000000000..6529dedfb6
--- /dev/null
+++ b/configs/rock64-rk3328_defconfig
@@ -0,0 +1,91 @@
+CONFIG_SMBIOS_MANUFACTURER="pine64"
+CONFIG_SMBIOS_PRODUCT_NAME="rock64_rk3328"
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_ROCKCHIP_RK3328=y
+CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x40000
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_DEBUG_UART_BASE=0xFF130000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART=y
+CONFIG_NR_DRAM_BANKS=1
+# CONFIG_ANDROID_BOOT_IMAGE is not set
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-rock64.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_ATF=y
+CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
+CONFIG_FASTBOOT_BUF_ADDR=0x800800
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=1
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock64"
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_SPI_FLASH=y
+CONFIG_SF_DEFAULT_SPEED=20000000
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PHY=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_ROCKCHIP_RK3328=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_DM_RESET=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
+CONFIG_USB_GADGET_VENDOR_NUM=0x2207
+CONFIG_USB_GADGET_PRODUCT_NUM=0x330a
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_ERRNO_STR=y
--
2.16.4
^ permalink raw reply related [flat|nested] 52+ messages in thread* [U-Boot] [PATCH v2 5/5] rockchip: rk3328: add rock64-rk3328_defconfig
2019-05-19 12:10 ` [U-Boot] [PATCH v2 5/5] rockchip: rk3328: add rock64-rk3328_defconfig Matwey V. Kornilov
@ 2019-05-20 17:11 ` Vagrant Cascadian
2019-05-20 17:22 ` Matwey V. Kornilov
2019-05-30 1:26 ` Kever Yang
1 sibling, 1 reply; 52+ messages in thread
From: Vagrant Cascadian @ 2019-05-20 17:11 UTC (permalink / raw)
To: u-boot
On 2019-05-19, Matwey V. Kornilov wrote:
> The ROCK64 is a credit card size SBC based on Rockchip RK3328
> Quad-Core ARM Cortex A53.
>
> This series allow building u-boot SPL and u-boot.itb for Rock64
> board. The proprietary TPL is stil required for deploy:
>
> ./tools/mkimage -n rk3328 -T rksd \
> -d ./rkbin/bin/rk33/rk3328_ddr_333MHz_v1.14.bin idbloader.img
> cat ./spl/u-boot-spl.bin >> idbloader.img
> dd if=idbloader.img of=/dev/sdcard seek=64 conv=notrunc
> dd if=u-boot.itb of=/dev/sdcard seek=16384 conv=notrunc
Could you add a patch documenting this in doc/README.rockchip or a
board-specific README? That would be more useful than having to search
the git commit messages or mailing list archives.
Tested this patch series against v2019.07-rc2, and I was able to pxe
boot fine, but unfortunately was unable to boot from microSD.
I presume this is caused by some other change since v2019.07-rc1, since
the earlier rock64 patches worked fine with microSD on v2019.07-rc1.
Scanning mmc 1:6...
Found /boot/extlinux/extlinux.conf
Retrieving file: /boot/extlinux/extlinux.conf
1953 bytes read in 4 ms (476.6 KiB/s)
U-Boot menu
1: Debian GNU/Linux kernel 5.1.0-trunk-arm64
2: Debian GNU/Linux kernel 5.1.0-trunk-arm64 (rescue target)
3: Debian GNU/Linux kernel 5.0.0-trunk-arm64
4: Debian GNU/Linux kernel 5.0.0-trunk-arm64 (rescue target)
5: Debian GNU/Linux kernel 4.19.0-5-arm64
6: Debian GNU/Linux kernel 4.19.0-5-arm64 (rescue target)
Enter choice: 1
1: Debian GNU/Linux kernel 5.1.0-trunk-arm64
Retrieving file: /boot/initrd.img-5.1.0-trunk-arm64
** fs_devread read error - block
Skipping l0 for failure retrieving initrd
2: Debian GNU/Linux kernel 5.1.0-trunk-arm64 (rescue target)
Retrieving file: /boot/initrd.img-5.1.0-trunk-arm64
*** ERROR: Can't read GPT Entries ***
GPT: Failed to allocate memory for PTE
part_get_info_efi: *** ERROR: Invalid GPT ***
*** ERROR: Can't read GPT header ***
I enabled CONFIG_CMD_CACHE=y and tried "dcache off" but that didn't
appear to help anything. Any other suggestions?
live well,
vagrant
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 227 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190520/39e48ac9/attachment.sig>
^ permalink raw reply [flat|nested] 52+ messages in thread
* [U-Boot] [PATCH v2 5/5] rockchip: rk3328: add rock64-rk3328_defconfig
2019-05-20 17:11 ` Vagrant Cascadian
@ 2019-05-20 17:22 ` Matwey V. Kornilov
2019-05-20 18:15 ` Vagrant Cascadian
0 siblings, 1 reply; 52+ messages in thread
From: Matwey V. Kornilov @ 2019-05-20 17:22 UTC (permalink / raw)
To: u-boot
пн, 20 мая 2019 г. в 20:11, Vagrant Cascadian <vagrant@debian.org>:
>
> On 2019-05-19, Matwey V. Kornilov wrote:
> > The ROCK64 is a credit card size SBC based on Rockchip RK3328
> > Quad-Core ARM Cortex A53.
> >
> > This series allow building u-boot SPL and u-boot.itb for Rock64
> > board. The proprietary TPL is stil required for deploy:
> >
> > ./tools/mkimage -n rk3328 -T rksd \
> > -d ./rkbin/bin/rk33/rk3328_ddr_333MHz_v1.14.bin idbloader.img
> > cat ./spl/u-boot-spl.bin >> idbloader.img
> > dd if=idbloader.img of=/dev/sdcard seek=64 conv=notrunc
> > dd if=u-boot.itb of=/dev/sdcard seek=16384 conv=notrunc
>
> Could you add a patch documenting this in doc/README.rockchip or a
> board-specific README? That would be more useful than having to search
> the git commit messages or mailing list archives.
>
>
> Tested this patch series against v2019.07-rc2, and I was able to pxe
> boot fine, but unfortunately was unable to boot from microSD.
>
> I presume this is caused by some other change since v2019.07-rc1, since
> the earlier rock64 patches worked fine with microSD on v2019.07-rc1.\
Thanks for the report. This series is based on 98b3156b0df4 At least
bootefi works fine for me.
Do v1 patches works for you on v2019.07-rc2?
>
> Scanning mmc 1:6...
> Found /boot/extlinux/extlinux.conf
> Retrieving file: /boot/extlinux/extlinux.conf
> 1953 bytes read in 4 ms (476.6 KiB/s)
> U-Boot menu
> 1: Debian GNU/Linux kernel 5.1.0-trunk-arm64
> 2: Debian GNU/Linux kernel 5.1.0-trunk-arm64 (rescue target)
> 3: Debian GNU/Linux kernel 5.0.0-trunk-arm64
> 4: Debian GNU/Linux kernel 5.0.0-trunk-arm64 (rescue target)
> 5: Debian GNU/Linux kernel 4.19.0-5-arm64
> 6: Debian GNU/Linux kernel 4.19.0-5-arm64 (rescue target)
> Enter choice: 1
> 1: Debian GNU/Linux kernel 5.1.0-trunk-arm64
> Retrieving file: /boot/initrd.img-5.1.0-trunk-arm64
> ** fs_devread read error - block
> Skipping l0 for failure retrieving initrd
> 2: Debian GNU/Linux kernel 5.1.0-trunk-arm64 (rescue target)
> Retrieving file: /boot/initrd.img-5.1.0-trunk-arm64
> *** ERROR: Can't read GPT Entries ***
> GPT: Failed to allocate memory for PTE
> part_get_info_efi: *** ERROR: Invalid GPT ***
> *** ERROR: Can't read GPT header ***
>
> I enabled CONFIG_CMD_CACHE=y and tried "dcache off" but that didn't
> appear to help anything. Any other suggestions?
>
>
> live well,
> vagrant
--
With best regards,
Matwey V. Kornilov
^ permalink raw reply [flat|nested] 52+ messages in thread
* [U-Boot] [PATCH v2 5/5] rockchip: rk3328: add rock64-rk3328_defconfig
2019-05-20 17:22 ` Matwey V. Kornilov
@ 2019-05-20 18:15 ` Vagrant Cascadian
2019-05-22 16:59 ` Matwey V. Kornilov
0 siblings, 1 reply; 52+ messages in thread
From: Vagrant Cascadian @ 2019-05-20 18:15 UTC (permalink / raw)
To: u-boot
On 2019-05-20, Matwey V. Kornilov wrote:
> пн, 20 мая 2019 г. в 20:11, Vagrant Cascadian <vagrant@debian.org>:
>>
>> On 2019-05-19, Matwey V. Kornilov wrote:
>> > The ROCK64 is a credit card size SBC based on Rockchip RK3328
>> > Quad-Core ARM Cortex A53.
>> >
>> > This series allow building u-boot SPL and u-boot.itb for Rock64
>> > board. The proprietary TPL is stil required for deploy:
>> >
>> > ./tools/mkimage -n rk3328 -T rksd \
>> > -d ./rkbin/bin/rk33/rk3328_ddr_333MHz_v1.14.bin idbloader.img
>> > cat ./spl/u-boot-spl.bin >> idbloader.img
>> > dd if=idbloader.img of=/dev/sdcard seek=64 conv=notrunc
>> > dd if=u-boot.itb of=/dev/sdcard seek=16384 conv=notrunc
>>
>> Could you add a patch documenting this in doc/README.rockchip or a
>> board-specific README? That would be more useful than having to search
>> the git commit messages or mailing list archives.
>>
>>
>> Tested this patch series against v2019.07-rc2, and I was able to pxe
>> boot fine, but unfortunately was unable to boot from microSD.
>>
>> I presume this is caused by some other change since v2019.07-rc1, since
>> the earlier rock64 patches worked fine with microSD on v2019.07-rc1.\
>
> Thanks for the report. This series is based on 98b3156b0df4 At least
> bootefi works fine for me.
No obvious relevent changes between 98b3156b0df4 and v2019.07-rc2.
I haven't tested with bootefi ... will give that a try too.
> Do v1 patches works for you on v2019.07-rc2?
With some minor rebasing to apply to -rc2, the v1 patches fail in the
same way as the v2 patches on top of v2019.07-rc2.
live well,
vagrant
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 227 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190520/75ce815e/attachment.sig>
^ permalink raw reply [flat|nested] 52+ messages in thread
* [U-Boot] [PATCH v2 5/5] rockchip: rk3328: add rock64-rk3328_defconfig
2019-05-20 18:15 ` Vagrant Cascadian
@ 2019-05-22 16:59 ` Matwey V. Kornilov
0 siblings, 0 replies; 52+ messages in thread
From: Matwey V. Kornilov @ 2019-05-22 16:59 UTC (permalink / raw)
To: u-boot
пн, 20 мая 2019 г. в 21:15, Vagrant Cascadian <vagrant@debian.org>:
>
> On 2019-05-20, Matwey V. Kornilov wrote:
> > пн, 20 мая 2019 г. в 20:11, Vagrant Cascadian <vagrant@debian.org>:
> >>
> >> On 2019-05-19, Matwey V. Kornilov wrote:
> >> > The ROCK64 is a credit card size SBC based on Rockchip RK3328
> >> > Quad-Core ARM Cortex A53.
> >> >
> >> > This series allow building u-boot SPL and u-boot.itb for Rock64
> >> > board. The proprietary TPL is stil required for deploy:
> >> >
> >> > ./tools/mkimage -n rk3328 -T rksd \
> >> > -d ./rkbin/bin/rk33/rk3328_ddr_333MHz_v1.14.bin idbloader.img
> >> > cat ./spl/u-boot-spl.bin >> idbloader.img
> >> > dd if=idbloader.img of=/dev/sdcard seek=64 conv=notrunc
> >> > dd if=u-boot.itb of=/dev/sdcard seek=16384 conv=notrunc
> >>
> >> Could you add a patch documenting this in doc/README.rockchip or a
> >> board-specific README? That would be more useful than having to search
> >> the git commit messages or mailing list archives.
> >>
> >>
> >> Tested this patch series against v2019.07-rc2, and I was able to pxe
> >> boot fine, but unfortunately was unable to boot from microSD.
> >>
> >> I presume this is caused by some other change since v2019.07-rc1, since
> >> the earlier rock64 patches worked fine with microSD on v2019.07-rc1.\
> >
> > Thanks for the report. This series is based on 98b3156b0df4 At least
> > bootefi works fine for me.
>
> No obvious relevent changes between 98b3156b0df4 and v2019.07-rc2.
>
> I haven't tested with bootefi ... will give that a try too.
>
>
> > Do v1 patches works for you on v2019.07-rc2?
>
> With some minor rebasing to apply to -rc2, the v1 patches fail in the
> same way as the v2 patches on top of v2019.07-rc2.
Maybe try to rebase?
Could you share your OS image? I can not reproduce the issue now :(
>
>
> live well,
> vagrant
--
With best regards,
Matwey V. Kornilov
^ permalink raw reply [flat|nested] 52+ messages in thread
* [U-Boot] [PATCH v2 5/5] rockchip: rk3328: add rock64-rk3328_defconfig
2019-05-19 12:10 ` [U-Boot] [PATCH v2 5/5] rockchip: rk3328: add rock64-rk3328_defconfig Matwey V. Kornilov
2019-05-20 17:11 ` Vagrant Cascadian
@ 2019-05-30 1:26 ` Kever Yang
1 sibling, 0 replies; 52+ messages in thread
From: Kever Yang @ 2019-05-30 1:26 UTC (permalink / raw)
To: u-boot
On 05/19/2019 08:10 PM, Matwey V. Kornilov wrote:
> The ROCK64 is a credit card size SBC based on Rockchip RK3328
> Quad-Core ARM Cortex A53.
>
> This series allow building u-boot SPL and u-boot.itb for Rock64
> board. The proprietary TPL is stil required for deploy:
>
> ./tools/mkimage -n rk3328 -T rksd \
> -d ./rkbin/bin/rk33/rk3328_ddr_333MHz_v1.14.bin idbloader.img
> cat ./spl/u-boot-spl.bin >> idbloader.img
> dd if=idbloader.img of=/dev/sdcard seek=64 conv=notrunc
> dd if=u-boot.itb of=/dev/sdcard seek=16384 conv=notrunc
>
> Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Thanks,
- Kever
> ---
> configs/rock64-rk3328_defconfig | 91 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 91 insertions(+)
> create mode 100644 configs/rock64-rk3328_defconfig
>
> diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig
> new file mode 100644
> index 0000000000..6529dedfb6
> --- /dev/null
> +++ b/configs/rock64-rk3328_defconfig
> @@ -0,0 +1,91 @@
> +CONFIG_SMBIOS_MANUFACTURER="pine64"
> +CONFIG_SMBIOS_PRODUCT_NAME="rock64_rk3328"
> +CONFIG_ARM=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SYS_MALLOC_F_LEN=0x2000
> +CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_ROCKCHIP_RK3328=y
> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x40000
> +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
> +CONFIG_SPL_STACK_R_ADDR=0x600000
> +CONFIG_DEBUG_UART_BASE=0xFF130000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_DEBUG_UART=y
> +CONFIG_NR_DRAM_BANKS=1
> +# CONFIG_ANDROID_BOOT_IMAGE is not set
> +CONFIG_FIT=y
> +CONFIG_FIT_VERBOSE=y
> +CONFIG_SPL_LOAD_FIT=y
> +CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-rock64.dtb"
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_ATF=y
> +CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> +CONFIG_FASTBOOT_BUF_ADDR=0x800800
> +CONFIG_FASTBOOT_FLASH=y
> +CONFIG_FASTBOOT_FLASH_MMC_DEV=1
> +CONFIG_CMD_BOOTZ=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_TIME=y
> +CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock64"
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_REGMAP=y
> +CONFIG_SPL_REGMAP=y
> +CONFIG_SYSCON=y
> +CONFIG_SPL_SYSCON=y
> +CONFIG_CLK=y
> +CONFIG_SPL_CLK=y
> +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_SF_DEFAULT_SPEED=20000000
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PHY=y
> +CONFIG_PINCTRL=y
> +CONFIG_SPL_PINCTRL=y
> +CONFIG_PINCTRL_ROCKCHIP_RK3328=y
> +CONFIG_DM_PMIC=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_RAM=y
> +CONFIG_SPL_RAM=y
> +CONFIG_DM_RESET=y
> +CONFIG_BAUDRATE=1500000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_OHCI_HCD=y
> +CONFIG_USB_OHCI_GENERIC=y
> +CONFIG_USB_DWC2=y
> +CONFIG_USB_DWC3=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
> +CONFIG_USB_GADGET_VENDOR_NUM=0x2207
> +CONFIG_USB_GADGET_PRODUCT_NUM=0x330a
> +CONFIG_USB_GADGET_DWC2_OTG=y
> +CONFIG_USE_TINY_PRINTF=y
> +CONFIG_SPL_TINY_MEMSET=y
> +CONFIG_ERRNO_STR=y
^ permalink raw reply [flat|nested] 52+ messages in thread
* [U-Boot] [PATCH v2 0/5] Add initial support for Pine64 Rock64 board
2019-05-19 12:10 ` [U-Boot] [PATCH v2 0/5] Add initial support for Pine64 Rock64 board Matwey V. Kornilov
` (4 preceding siblings ...)
2019-05-19 12:10 ` [U-Boot] [PATCH v2 5/5] rockchip: rk3328: add rock64-rk3328_defconfig Matwey V. Kornilov
@ 2019-05-30 1:23 ` Kever Yang
2019-05-31 0:37 ` Kever Yang
2019-06-01 14:47 ` [U-Boot] [PATCH v3 0/6] " Matwey V. Kornilov
7 siblings, 0 replies; 52+ messages in thread
From: Kever Yang @ 2019-05-30 1:23 UTC (permalink / raw)
To: u-boot
Hi Matwey,
Recommend to use patman(tools/patman) to send to patch set,
so that it's easy to add change log for each version on each patch,
and don't forget to add review tag if you didn't change anything fot
the patch, eg. review tag from Simon on patch 3.
Thanks,
- Kever
On 05/19/2019 08:10 PM, Matwey V. Kornilov wrote:
> This series adds initial basic support for Pine64 Rock64 board.
>
> The ROCK64 is a credit card size SBC based on Rockchip RK3328 Quad-Core ARM Cortex A53.
>
> This series allow building u-boot SPL and u-boot.itb for Rock64 board.
> Unfortunately, proprietary TPL is stil required for deploy:
>
> ./tools/mkimage -n rk3328 -T rksd -d ./rkbin/bin/rk33/rk3328_ddr_333MHz_v1.14.bin idbloader.img
> cat ./spl/u-boot-spl.bin >> idbloader.img
> dd if=idbloader.img of=/dev/sdcard seek=64 conv=notrunc
> dd if=u-boot.itb of=/dev/sdcard seek=16384 conv=notrunc
>
> The series has been tested with ATF v1.6.
>
> Some patches in the series are taken from https://github.com/rockchip-linux/u-boot
> Credits are given in each patch separately.
>
> Changes since v1:
> - reword messages for commit 2,4,5
> - set SPL_REVERVE_IRAM to 0x40000
> - add spl-boot-order to rk3328-rock64-u-boot.dtsi
>
> Kever Yang (3):
> rockchip: rk3328: add SPL board file support
> rockchip: rk3328: add SPL support
> rockchip: Kconfig: enable SPL support for rk3328
>
> Matwey V. Kornilov (2):
> rockchip: dts: rk3328: add rk3328-rock64.dts
> rockchip: rk3328: add rock64-rk3328_defconfig
>
> arch/arm/dts/Makefile | 3 +-
> arch/arm/dts/rk3328-rock64-u-boot.dtsi | 34 ++++
> arch/arm/dts/rk3328-rock64.dts | 294 ++++++++++++++++++++++++++++++
> arch/arm/mach-rockchip/Kconfig | 7 +
> arch/arm/mach-rockchip/Makefile | 1 +
> arch/arm/mach-rockchip/rk3328-board-spl.c | 59 ++++++
> configs/rock64-rk3328_defconfig | 91 +++++++++
> include/configs/rk3328_common.h | 4 +
> 8 files changed, 492 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/dts/rk3328-rock64-u-boot.dtsi
> create mode 100644 arch/arm/dts/rk3328-rock64.dts
> create mode 100644 arch/arm/mach-rockchip/rk3328-board-spl.c
> create mode 100644 configs/rock64-rk3328_defconfig
>
^ permalink raw reply [flat|nested] 52+ messages in thread* [U-Boot] [PATCH v2 0/5] Add initial support for Pine64 Rock64 board
2019-05-19 12:10 ` [U-Boot] [PATCH v2 0/5] Add initial support for Pine64 Rock64 board Matwey V. Kornilov
` (5 preceding siblings ...)
2019-05-30 1:23 ` [U-Boot] [PATCH v2 0/5] Add initial support for Pine64 Rock64 board Kever Yang
@ 2019-05-31 0:37 ` Kever Yang
2019-06-01 14:47 ` [U-Boot] [PATCH v3 0/6] " Matwey V. Kornilov
7 siblings, 0 replies; 52+ messages in thread
From: Kever Yang @ 2019-05-31 0:37 UTC (permalink / raw)
To: u-boot
Hi Matwey,
This patch set broken the spl build for evb-rk3328, see:
https://travis-ci.org/keveryang/u-boot/jobs/539154859
Please try buildman/buildman rockchip or pass the Travis build for
U-Boot for your patches.
Thanks,
- Kever
On 05/19/2019 08:10 PM, Matwey V. Kornilov wrote:
> This series adds initial basic support for Pine64 Rock64 board.
>
> The ROCK64 is a credit card size SBC based on Rockchip RK3328 Quad-Core ARM Cortex A53.
>
> This series allow building u-boot SPL and u-boot.itb for Rock64 board.
> Unfortunately, proprietary TPL is stil required for deploy:
>
> ./tools/mkimage -n rk3328 -T rksd -d ./rkbin/bin/rk33/rk3328_ddr_333MHz_v1.14.bin idbloader.img
> cat ./spl/u-boot-spl.bin >> idbloader.img
> dd if=idbloader.img of=/dev/sdcard seek=64 conv=notrunc
> dd if=u-boot.itb of=/dev/sdcard seek=16384 conv=notrunc
>
> The series has been tested with ATF v1.6.
>
> Some patches in the series are taken from https://github.com/rockchip-linux/u-boot
> Credits are given in each patch separately.
>
> Changes since v1:
> - reword messages for commit 2,4,5
> - set SPL_REVERVE_IRAM to 0x40000
> - add spl-boot-order to rk3328-rock64-u-boot.dtsi
>
> Kever Yang (3):
> rockchip: rk3328: add SPL board file support
> rockchip: rk3328: add SPL support
> rockchip: Kconfig: enable SPL support for rk3328
>
> Matwey V. Kornilov (2):
> rockchip: dts: rk3328: add rk3328-rock64.dts
> rockchip: rk3328: add rock64-rk3328_defconfig
>
> arch/arm/dts/Makefile | 3 +-
> arch/arm/dts/rk3328-rock64-u-boot.dtsi | 34 ++++
> arch/arm/dts/rk3328-rock64.dts | 294 ++++++++++++++++++++++++++++++
> arch/arm/mach-rockchip/Kconfig | 7 +
> arch/arm/mach-rockchip/Makefile | 1 +
> arch/arm/mach-rockchip/rk3328-board-spl.c | 59 ++++++
> configs/rock64-rk3328_defconfig | 91 +++++++++
> include/configs/rk3328_common.h | 4 +
> 8 files changed, 492 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/dts/rk3328-rock64-u-boot.dtsi
> create mode 100644 arch/arm/dts/rk3328-rock64.dts
> create mode 100644 arch/arm/mach-rockchip/rk3328-board-spl.c
> create mode 100644 configs/rock64-rk3328_defconfig
>
^ permalink raw reply [flat|nested] 52+ messages in thread* [U-Boot] [PATCH v3 0/6] Add initial support for Pine64 Rock64 board
2019-05-19 12:10 ` [U-Boot] [PATCH v2 0/5] Add initial support for Pine64 Rock64 board Matwey V. Kornilov
` (6 preceding siblings ...)
2019-05-31 0:37 ` Kever Yang
@ 2019-06-01 14:47 ` Matwey V. Kornilov
2019-06-01 14:47 ` [U-Boot] [PATCH v3 1/6] rockchip: rk3328: add SPL board file support Matwey V. Kornilov
` (6 more replies)
7 siblings, 7 replies; 52+ messages in thread
From: Matwey V. Kornilov @ 2019-06-01 14:47 UTC (permalink / raw)
To: u-boot
This series adds initial basic support for Pine64 Rock64 board.
The ROCK64 is a credit card size SBC based on Rockchip RK3328 Quad-Core ARM Cortex A53.
This series allow building u-boot SPL and u-boot.itb for Rock64 board.
Unfortunately, proprietary TPL is stil required for deploy:
./tools/mkimage -n rk3328 -T rksd -d ./rkbin/bin/rk33/rk3328_ddr_333MHz_v1.14.bin idbloader.img
cat ./spl/u-boot-spl.bin >> idbloader.img
dd if=idbloader.img of=/dev/sdcard seek=64 conv=notrunc
dd if=u-boot.itb of=/dev/sdcard seek=16384 conv=notrunc
The series has been tested with ATF v1.6.
Some patches in the series are taken from https://github.com/rockchip-linux/u-boot
Credits are given in each patch separately.
Changes since v2:
- add deploy documentation to doc/README.rockchip
- fix broken evb-rk3328 build
Changes since v1:
- reword messages for commit 2,4,5
- set SPL_REVERVE_IRAM to 0x40000
- add spl-boot-order to rk3328-rock64-u-boot.dtsi
Kever Yang (3):
rockchip: rk3328: add SPL board file support
rockchip: rk3328: add SPL support
rockchip: Kconfig: enable SPL support for rk3328
Matwey V. Kornilov (3):
rockchip: dts: rk3328: add rk3328-rock64.dts
rockchip: rk3328: add rock64-rk3328_defconfig
doc: rockchip: Add note for Pine64 Rock64 board
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/rk3328-rock64-u-boot.dtsi | 34 ++++
arch/arm/dts/rk3328-rock64.dts | 294 ++++++++++++++++++++++++++++++
arch/arm/mach-rockchip/Kconfig | 7 +
arch/arm/mach-rockchip/Makefile | 1 +
arch/arm/mach-rockchip/rk3328-board-spl.c | 59 ++++++
configs/evb-rk3328_defconfig | 7 +
configs/rock64-rk3328_defconfig | 91 +++++++++
doc/README.rockchip | 30 ++-
include/configs/rk3328_common.h | 4 +
10 files changed, 527 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/dts/rk3328-rock64-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3328-rock64.dts
create mode 100644 arch/arm/mach-rockchip/rk3328-board-spl.c
create mode 100644 configs/rock64-rk3328_defconfig
--
2.16.4
^ permalink raw reply [flat|nested] 52+ messages in thread* [U-Boot] [PATCH v3 1/6] rockchip: rk3328: add SPL board file support
2019-06-01 14:47 ` [U-Boot] [PATCH v3 0/6] " Matwey V. Kornilov
@ 2019-06-01 14:47 ` Matwey V. Kornilov
2019-06-01 14:47 ` [U-Boot] [PATCH v3 2/6] rockchip: rk3328: add SPL support Matwey V. Kornilov
` (5 subsequent siblings)
6 siblings, 0 replies; 52+ messages in thread
From: Matwey V. Kornilov @ 2019-06-01 14:47 UTC (permalink / raw)
To: u-boot
From: Kever Yang <kever.yang@rock-chips.com>
rk3328 SPL is locate at dram, so do not have strict size limit,
suppose to enable storage media controller driver, load ATF and
U-Boot, then boot into ATF.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
[cherry picked from https://github.com/rockchip-linux/u-boot/commit/4ebe3968b683190cb8e5741aa7227b4fa7497874 with minor modifications]
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
---
arch/arm/mach-rockchip/Makefile | 1 +
arch/arm/mach-rockchip/rk3328-board-spl.c | 59 +++++++++++++++++++++++++++++++
2 files changed, 60 insertions(+)
create mode 100644 arch/arm/mach-rockchip/rk3328-board-spl.c
diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile
index 846c82d70a..23760a959a 100644
--- a/arch/arm/mach-rockchip/Makefile
+++ b/arch/arm/mach-rockchip/Makefile
@@ -18,6 +18,7 @@ obj-spl-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o
obj-spl-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board-spl.o
obj-spl-$(CONFIG_ROCKCHIP_RK322X) += rk322x-board-spl.o spl-boot-order.o
obj-spl-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board-spl.o
+obj-spl-$(CONFIG_ROCKCHIP_RK3328) += rk3328-board-spl.o
obj-spl-$(CONFIG_ROCKCHIP_RK3368) += rk3368-board-spl.o spl-boot-order.o
obj-spl-$(CONFIG_ROCKCHIP_RK3399) += rk3399-board-spl.o spl-boot-order.o
diff --git a/arch/arm/mach-rockchip/rk3328-board-spl.c b/arch/arm/mach-rockchip/rk3328-board-spl.c
new file mode 100644
index 0000000000..7f49d056a0
--- /dev/null
+++ b/arch/arm/mach-rockchip/rk3328-board-spl.c
@@ -0,0 +1,59 @@
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <debug_uart.h>
+#include <dm.h>
+#include <dm/pinctrl.h>
+#include <ram.h>
+#include <spl.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void board_debug_uart_init(void)
+{
+}
+
+void board_init_f(ulong dummy)
+{
+ struct udevice *dev;
+ int ret;
+
+ ret = spl_early_init();
+ if (ret) {
+ debug("spl_early_init() failed: %d\n", ret);
+ hang();
+ }
+
+ preloader_console_init();
+
+ ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+ if (ret) {
+ debug("DRAM init failed: %d\n", ret);
+ return;
+ }
+}
+
+u32 spl_boot_mode(const u32 boot_device)
+{
+ return MMCSD_MODE_RAW;
+}
+
+u32 spl_boot_device(void)
+{
+ return BOOT_DEVICE_MMC1;
+}
+
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
+{
+ /* Just empty function now - can't decide what to choose */
+ debug("%s: %s\n", __func__, name);
+
+ return 0;
+}
+#endif
--
2.16.4
^ permalink raw reply related [flat|nested] 52+ messages in thread* [U-Boot] [PATCH v3 2/6] rockchip: rk3328: add SPL support
2019-06-01 14:47 ` [U-Boot] [PATCH v3 0/6] " Matwey V. Kornilov
2019-06-01 14:47 ` [U-Boot] [PATCH v3 1/6] rockchip: rk3328: add SPL board file support Matwey V. Kornilov
@ 2019-06-01 14:47 ` Matwey V. Kornilov
2019-06-01 14:47 ` [U-Boot] [PATCH v3 3/6] rockchip: Kconfig: enable SPL support for rk3328 Matwey V. Kornilov
` (4 subsequent siblings)
6 siblings, 0 replies; 52+ messages in thread
From: Matwey V. Kornilov @ 2019-06-01 14:47 UTC (permalink / raw)
To: u-boot
From: Kever Yang <kever.yang@rock-chips.com>
Add SPL support for rk3328, default with of-platdata enabled.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
[cherry picked from https://github.com/rockchip-linux/u-boot/commit/cb2b7a1bc75ebb116b1eb9b0ae0223e84d86fc4b with minor modifications]
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
---
include/configs/rk3328_common.h | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/include/configs/rk3328_common.h b/include/configs/rk3328_common.h
index 71aad7029a..2a81c803b6 100644
--- a/include/configs/rk3328_common.h
+++ b/include/configs/rk3328_common.h
@@ -16,6 +16,10 @@
#define CONFIG_SYS_INIT_SP_ADDR 0x00300000
#define CONFIG_SYS_LOAD_ADDR 0x00800800
+#define CONFIG_SPL_STACK 0x00400000
+#define CONFIG_SPL_MAX_SIZE 0x100000
+#define CONFIG_SPL_BSS_START_ADDR 0x2000000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x2000
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */
--
2.16.4
^ permalink raw reply related [flat|nested] 52+ messages in thread* [U-Boot] [PATCH v3 3/6] rockchip: Kconfig: enable SPL support for rk3328
2019-06-01 14:47 ` [U-Boot] [PATCH v3 0/6] " Matwey V. Kornilov
2019-06-01 14:47 ` [U-Boot] [PATCH v3 1/6] rockchip: rk3328: add SPL board file support Matwey V. Kornilov
2019-06-01 14:47 ` [U-Boot] [PATCH v3 2/6] rockchip: rk3328: add SPL support Matwey V. Kornilov
@ 2019-06-01 14:47 ` Matwey V. Kornilov
2019-06-01 14:47 ` [U-Boot] [PATCH v3 4/6] rockchip: dts: rk3328: add rk3328-rock64.dts Matwey V. Kornilov
` (3 subsequent siblings)
6 siblings, 0 replies; 52+ messages in thread
From: Matwey V. Kornilov @ 2019-06-01 14:47 UTC (permalink / raw)
To: u-boot
From: Kever Yang <kever.yang@rock-chips.com>
Enable SPL support and some related option in Kconfig.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
[cherry picked from https://github.com/rockchip-linux/u-boot/commit/430b01462bf3f24aaf7920ae2587a6943c39ab5d with minor modifications]
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
---
arch/arm/mach-rockchip/Kconfig | 7 +++++++
configs/evb-rk3328_defconfig | 7 +++++++
2 files changed, 14 insertions(+)
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index c05e3c3f48..3e38344b50 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -109,6 +109,13 @@ endif
config ROCKCHIP_RK3328
bool "Support Rockchip RK3328"
select ARM64
+ select SUPPORT_SPL
+ select SPL
+ imply SPL_SERIAL_SUPPORT
+ imply SPL_SEPARATE_BSS
+ select ENABLE_ARM_SOC_BOOT0_HOOK
+ select DEBUG_UART_BOARD_INIT
+ select SYS_NS16550
help
The Rockchip RK3328 is a ARM-based SoC with a quad-core Cortex-A53.
including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two
diff --git a/configs/evb-rk3328_defconfig b/configs/evb-rk3328_defconfig
index aff9c32362..92d6817ad5 100644
--- a/configs/evb-rk3328_defconfig
+++ b/configs/evb-rk3328_defconfig
@@ -1,7 +1,10 @@
CONFIG_ARM=y
CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_ROCKCHIP_RK3328=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_DEBUG_UART_BASE=0xFF130000
CONFIG_DEBUG_UART_CLOCK=24000000
@@ -19,11 +22,15 @@ CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TIME=y
CONFIG_DEFAULT_DEVICE_TREE="rk3328-evb"
+CONFIG_SPL_OF_CONTROL=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
CONFIG_CLK=y
+CONFIG_SPL_CLK=y
CONFIG_FASTBOOT_BUF_ADDR=0x800800
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=1
--
2.16.4
^ permalink raw reply related [flat|nested] 52+ messages in thread* [U-Boot] [PATCH v3 4/6] rockchip: dts: rk3328: add rk3328-rock64.dts
2019-06-01 14:47 ` [U-Boot] [PATCH v3 0/6] " Matwey V. Kornilov
` (2 preceding siblings ...)
2019-06-01 14:47 ` [U-Boot] [PATCH v3 3/6] rockchip: Kconfig: enable SPL support for rk3328 Matwey V. Kornilov
@ 2019-06-01 14:47 ` Matwey V. Kornilov
2019-06-01 14:47 ` [U-Boot] [PATCH v3 5/6] rockchip: rk3328: add rock64-rk3328_defconfig Matwey V. Kornilov
` (2 subsequent siblings)
6 siblings, 0 replies; 52+ messages in thread
From: Matwey V. Kornilov @ 2019-06-01 14:47 UTC (permalink / raw)
To: u-boot
rk3328-rock64.dts has been taken from Linux kernel commit
cff6d1d6f88b ("arm64: dts: rockchip: enable HS200 for eMMC on rock64")
with minor modifications (drop nodes not known by rk3328.dtsi).
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
---
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/rk3328-rock64-u-boot.dtsi | 34 ++++
arch/arm/dts/rk3328-rock64.dts | 294 +++++++++++++++++++++++++++++++++
3 files changed, 330 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/dts/rk3328-rock64-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3328-rock64.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 31ef2b66a3..f6b5bacfcc 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -93,7 +93,8 @@ dtb-$(CONFIG_ROCKCHIP_RK3288) += \
rk3288-vyasa.dtb
dtb-$(CONFIG_ROCKCHIP_RK3328) += \
- rk3328-evb.dtb
+ rk3328-evb.dtb \
+ rk3328-rock64.dtb
dtb-$(CONFIG_ROCKCHIP_RK3368) += \
rk3368-lion.dtb \
diff --git a/arch/arm/dts/rk3328-rock64-u-boot.dtsi b/arch/arm/dts/rk3328-rock64-u-boot.dtsi
new file mode 100644
index 0000000000..b077436cbc
--- /dev/null
+++ b/arch/arm/dts/rk3328-rock64-u-boot.dtsi
@@ -0,0 +1,34 @@
+/*
+ * (C) Copyright 2018 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/ {
+ aliases {
+ mmc0 = &emmc;
+ mmc1 = &sdmmc;
+ };
+
+ chosen {
+ u-boot,spl-boot-order = &emmc, &sdmmc;
+ };
+};
+
+&cru {
+ u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+ u-boot,dm-pre-reloc;
+};
+
+&emmc {
+ u-boot,dm-pre-reloc;
+ fifo-mode;
+};
+
+&sdmmc {
+ u-boot,dm-pre-reloc;
+ fifo-mode;
+};
diff --git a/arch/arm/dts/rk3328-rock64.dts b/arch/arm/dts/rk3328-rock64.dts
new file mode 100644
index 0000000000..7bcc53fcce
--- /dev/null
+++ b/arch/arm/dts/rk3328-rock64.dts
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 PINE64
+ */
+
+/dts-v1/;
+#include "rk3328.dtsi"
+
+/ {
+ model = "Pine64 Rock64";
+ compatible = "pine64,rock64", "rockchip,rk3328";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ gmac_clkin: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "gmac_clkin";
+ #clock-cells = <0>;
+ };
+
+ vcc_sd: sdmmc-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0m1_gpio>;
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_io>;
+ };
+
+ vcc_host_5v: vcc-host-5v-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb30_host_drv>;
+ regulator-name = "vcc_host_5v";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb20_host_drv>;
+ regulator-name = "vcc_host1_5v";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+ vmmc-supply = <&vcc_io>;
+ vqmmc-supply = <&vcc18_emmc>;
+ status = "okay";
+};
+
+&gmac2io {
+ assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+ assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
+ clock_in_out = "input";
+ phy-supply = <&vcc_io>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmiim1_pins>;
+ snps,force_thresh_dma_mode;
+ snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x24>;
+ rx_delay = <0x18>;
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ rk805: rk805 at 18 {
+ compatible = "rockchip,rk805";
+ reg = <0x18>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk805-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc5-supply = <&vcc_io>;
+ vcc6-supply = <&vcc_sys>;
+
+ regulators {
+ vdd_logic: DCDC_REG1 {
+ regulator-name = "vdd_logic";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1450000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vdd_arm: DCDC_REG2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1450000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-name = "vcc_io";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_18: LDO_REG1 {
+ regulator-name = "vdd_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc18_emmc: LDO_REG2 {
+ regulator-name = "vcc_18emmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-name = "vdd_10";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+ };
+ };
+};
+
+&io_domains {
+ status = "okay";
+
+ vccio1-supply = <&vcc_io>;
+ vccio2-supply = <&vcc18_emmc>;
+ vccio3-supply = <&vcc_io>;
+ vccio4-supply = <&vcc_18>;
+ vccio5-supply = <&vcc_io>;
+ vccio6-supply = <&vcc_io>;
+ pmuio-supply = <&vcc_io>;
+};
+
+&pinctrl {
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb2 {
+ usb20_host_drv: usb20-host-drv {
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb3 {
+ usb30_host_drv: usb30-host-drv {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+ vmmc-supply = <&vcc_sd>;
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ spiflash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+
+ /* maximum speed for Rockchip SPI */
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb20_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
--
2.16.4
^ permalink raw reply related [flat|nested] 52+ messages in thread* [U-Boot] [PATCH v3 5/6] rockchip: rk3328: add rock64-rk3328_defconfig
2019-06-01 14:47 ` [U-Boot] [PATCH v3 0/6] " Matwey V. Kornilov
` (3 preceding siblings ...)
2019-06-01 14:47 ` [U-Boot] [PATCH v3 4/6] rockchip: dts: rk3328: add rk3328-rock64.dts Matwey V. Kornilov
@ 2019-06-01 14:47 ` Matwey V. Kornilov
2019-06-04 7:42 ` Kever Yang
2019-06-01 14:47 ` [U-Boot] [PATCH v3 6/6] doc: rockchip: Add note for Pine64 Rock64 board Matwey V. Kornilov
2019-06-08 21:27 ` [U-Boot] [PATCH v4 0/6] Add initial support " Matwey V. Kornilov
6 siblings, 1 reply; 52+ messages in thread
From: Matwey V. Kornilov @ 2019-06-01 14:47 UTC (permalink / raw)
To: u-boot
The ROCK64 is a credit card size SBC based on Rockchip RK3328
Quad-Core ARM Cortex A53.
This series allow building u-boot SPL and u-boot.itb for Rock64
board. The proprietary TPL is stil required for deploy:
./tools/mkimage -n rk3328 -T rksd \
-d ./rkbin/bin/rk33/rk3328_ddr_333MHz_v1.16.bin idbloader.img
cat ./spl/u-boot-spl.bin >> idbloader.img
dd if=idbloader.img of=/dev/sdcard seek=64 conv=notrunc
dd if=u-boot.itb of=/dev/sdcard seek=16384 conv=notrunc
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
---
configs/rock64-rk3328_defconfig | 91 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 91 insertions(+)
create mode 100644 configs/rock64-rk3328_defconfig
diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig
new file mode 100644
index 0000000000..6529dedfb6
--- /dev/null
+++ b/configs/rock64-rk3328_defconfig
@@ -0,0 +1,91 @@
+CONFIG_SMBIOS_MANUFACTURER="pine64"
+CONFIG_SMBIOS_PRODUCT_NAME="rock64_rk3328"
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_ROCKCHIP_RK3328=y
+CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x40000
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_DEBUG_UART_BASE=0xFF130000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART=y
+CONFIG_NR_DRAM_BANKS=1
+# CONFIG_ANDROID_BOOT_IMAGE is not set
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-rock64.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_ATF=y
+CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
+CONFIG_FASTBOOT_BUF_ADDR=0x800800
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=1
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock64"
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_SPI_FLASH=y
+CONFIG_SF_DEFAULT_SPEED=20000000
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PHY=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_ROCKCHIP_RK3328=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_DM_RESET=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
+CONFIG_USB_GADGET_VENDOR_NUM=0x2207
+CONFIG_USB_GADGET_PRODUCT_NUM=0x330a
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_ERRNO_STR=y
--
2.16.4
^ permalink raw reply related [flat|nested] 52+ messages in thread* [U-Boot] [PATCH v3 5/6] rockchip: rk3328: add rock64-rk3328_defconfig
2019-06-01 14:47 ` [U-Boot] [PATCH v3 5/6] rockchip: rk3328: add rock64-rk3328_defconfig Matwey V. Kornilov
@ 2019-06-04 7:42 ` Kever Yang
2019-06-04 11:48 ` Matwey V. Kornilov
0 siblings, 1 reply; 52+ messages in thread
From: Kever Yang @ 2019-06-04 7:42 UTC (permalink / raw)
To: u-boot
Hi Matwey,
You will need to add MAINTAINER info for
configs/rock64-rk3328_defconfig,
or else Travis build fail in case "Check for configs without MAINTAINERS
entry":
https://travis-ci.org/keveryang/u-boot/jobs/541040787
You can add MAINTAIN info in board/rockchip/evb_rk3328/MAINTAINERS
before it need a dedicate folder for board setting.
Thanks,
- Kever
On 06/01/2019 10:47 PM, Matwey V. Kornilov wrote:
> The ROCK64 is a credit card size SBC based on Rockchip RK3328
> Quad-Core ARM Cortex A53.
>
> This series allow building u-boot SPL and u-boot.itb for Rock64
> board. The proprietary TPL is stil required for deploy:
>
> ./tools/mkimage -n rk3328 -T rksd \
> -d ./rkbin/bin/rk33/rk3328_ddr_333MHz_v1.16.bin idbloader.img
> cat ./spl/u-boot-spl.bin >> idbloader.img
> dd if=idbloader.img of=/dev/sdcard seek=64 conv=notrunc
> dd if=u-boot.itb of=/dev/sdcard seek=16384 conv=notrunc
>
> Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
> ---
> configs/rock64-rk3328_defconfig | 91 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 91 insertions(+)
> create mode 100644 configs/rock64-rk3328_defconfig
>
> diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig
> new file mode 100644
> index 0000000000..6529dedfb6
> --- /dev/null
> +++ b/configs/rock64-rk3328_defconfig
> @@ -0,0 +1,91 @@
> +CONFIG_SMBIOS_MANUFACTURER="pine64"
> +CONFIG_SMBIOS_PRODUCT_NAME="rock64_rk3328"
> +CONFIG_ARM=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SYS_MALLOC_F_LEN=0x2000
> +CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_ROCKCHIP_RK3328=y
> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x40000
> +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
> +CONFIG_SPL_STACK_R_ADDR=0x600000
> +CONFIG_DEBUG_UART_BASE=0xFF130000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_DEBUG_UART=y
> +CONFIG_NR_DRAM_BANKS=1
> +# CONFIG_ANDROID_BOOT_IMAGE is not set
> +CONFIG_FIT=y
> +CONFIG_FIT_VERBOSE=y
> +CONFIG_SPL_LOAD_FIT=y
> +CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-rock64.dtb"
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_ATF=y
> +CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> +CONFIG_FASTBOOT_BUF_ADDR=0x800800
> +CONFIG_FASTBOOT_FLASH=y
> +CONFIG_FASTBOOT_FLASH_MMC_DEV=1
> +CONFIG_CMD_BOOTZ=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_TIME=y
> +CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock64"
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_REGMAP=y
> +CONFIG_SPL_REGMAP=y
> +CONFIG_SYSCON=y
> +CONFIG_SPL_SYSCON=y
> +CONFIG_CLK=y
> +CONFIG_SPL_CLK=y
> +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_SF_DEFAULT_SPEED=20000000
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PHY=y
> +CONFIG_PINCTRL=y
> +CONFIG_SPL_PINCTRL=y
> +CONFIG_PINCTRL_ROCKCHIP_RK3328=y
> +CONFIG_DM_PMIC=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_RAM=y
> +CONFIG_SPL_RAM=y
> +CONFIG_DM_RESET=y
> +CONFIG_BAUDRATE=1500000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_OHCI_HCD=y
> +CONFIG_USB_OHCI_GENERIC=y
> +CONFIG_USB_DWC2=y
> +CONFIG_USB_DWC3=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
> +CONFIG_USB_GADGET_VENDOR_NUM=0x2207
> +CONFIG_USB_GADGET_PRODUCT_NUM=0x330a
> +CONFIG_USB_GADGET_DWC2_OTG=y
> +CONFIG_USE_TINY_PRINTF=y
> +CONFIG_SPL_TINY_MEMSET=y
> +CONFIG_ERRNO_STR=y
^ permalink raw reply [flat|nested] 52+ messages in thread
* [U-Boot] [PATCH v3 5/6] rockchip: rk3328: add rock64-rk3328_defconfig
2019-06-04 7:42 ` Kever Yang
@ 2019-06-04 11:48 ` Matwey V. Kornilov
0 siblings, 0 replies; 52+ messages in thread
From: Matwey V. Kornilov @ 2019-06-04 11:48 UTC (permalink / raw)
To: u-boot
Hi Kever,
Should I add myself as contact person?
вт, 4 июн. 2019 г. в 10:42, Kever Yang <kever.yang@rock-chips.com>:
>
> Hi Matwey,
>
> You will need to add MAINTAINER info for configs/rock64-rk3328_defconfig,
>
> or else Travis build fail in case " Check for configs without MAINTAINERS entry":
>
> https://travis-ci.org/keveryang/u-boot/jobs/541040787
>
> You can add MAINTAIN info in board/rockchip/evb_rk3328/MAINTAINERS
> before it need a dedicate folder for board setting.
>
> Thanks,
> - Kever
> On 06/01/2019 10:47 PM, Matwey V. Kornilov wrote:
>
> The ROCK64 is a credit card size SBC based on Rockchip RK3328
> Quad-Core ARM Cortex A53.
>
> This series allow building u-boot SPL and u-boot.itb for Rock64
> board. The proprietary TPL is stil required for deploy:
>
> ./tools/mkimage -n rk3328 -T rksd \
> -d ./rkbin/bin/rk33/rk3328_ddr_333MHz_v1.16.bin idbloader.img
> cat ./spl/u-boot-spl.bin >> idbloader.img
> dd if=idbloader.img of=/dev/sdcard seek=64 conv=notrunc
> dd if=u-boot.itb of=/dev/sdcard seek=16384 conv=notrunc
>
> Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
> ---
> configs/rock64-rk3328_defconfig | 91 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 91 insertions(+)
> create mode 100644 configs/rock64-rk3328_defconfig
>
> diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig
> new file mode 100644
> index 0000000000..6529dedfb6
> --- /dev/null
> +++ b/configs/rock64-rk3328_defconfig
> @@ -0,0 +1,91 @@
> +CONFIG_SMBIOS_MANUFACTURER="pine64"
> +CONFIG_SMBIOS_PRODUCT_NAME="rock64_rk3328"
> +CONFIG_ARM=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SYS_MALLOC_F_LEN=0x2000
> +CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_ROCKCHIP_RK3328=y
> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x40000
> +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
> +CONFIG_SPL_STACK_R_ADDR=0x600000
> +CONFIG_DEBUG_UART_BASE=0xFF130000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_DEBUG_UART=y
> +CONFIG_NR_DRAM_BANKS=1
> +# CONFIG_ANDROID_BOOT_IMAGE is not set
> +CONFIG_FIT=y
> +CONFIG_FIT_VERBOSE=y
> +CONFIG_SPL_LOAD_FIT=y
> +CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-rock64.dtb"
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_ATF=y
> +CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> +CONFIG_FASTBOOT_BUF_ADDR=0x800800
> +CONFIG_FASTBOOT_FLASH=y
> +CONFIG_FASTBOOT_FLASH_MMC_DEV=1
> +CONFIG_CMD_BOOTZ=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_TIME=y
> +CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock64"
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_REGMAP=y
> +CONFIG_SPL_REGMAP=y
> +CONFIG_SYSCON=y
> +CONFIG_SPL_SYSCON=y
> +CONFIG_CLK=y
> +CONFIG_SPL_CLK=y
> +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_SF_DEFAULT_SPEED=20000000
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PHY=y
> +CONFIG_PINCTRL=y
> +CONFIG_SPL_PINCTRL=y
> +CONFIG_PINCTRL_ROCKCHIP_RK3328=y
> +CONFIG_DM_PMIC=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_RAM=y
> +CONFIG_SPL_RAM=y
> +CONFIG_DM_RESET=y
> +CONFIG_BAUDRATE=1500000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_OHCI_HCD=y
> +CONFIG_USB_OHCI_GENERIC=y
> +CONFIG_USB_DWC2=y
> +CONFIG_USB_DWC3=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
> +CONFIG_USB_GADGET_VENDOR_NUM=0x2207
> +CONFIG_USB_GADGET_PRODUCT_NUM=0x330a
> +CONFIG_USB_GADGET_DWC2_OTG=y
> +CONFIG_USE_TINY_PRINTF=y
> +CONFIG_SPL_TINY_MEMSET=y
> +CONFIG_ERRNO_STR=y
>
>
--
With best regards,
Matwey V. Kornilov
^ permalink raw reply [flat|nested] 52+ messages in thread
* [U-Boot] [PATCH v3 6/6] doc: rockchip: Add note for Pine64 Rock64 board
2019-06-01 14:47 ` [U-Boot] [PATCH v3 0/6] " Matwey V. Kornilov
` (4 preceding siblings ...)
2019-06-01 14:47 ` [U-Boot] [PATCH v3 5/6] rockchip: rk3328: add rock64-rk3328_defconfig Matwey V. Kornilov
@ 2019-06-01 14:47 ` Matwey V. Kornilov
2019-06-04 2:48 ` Kever Yang
2019-06-08 21:27 ` [U-Boot] [PATCH v4 0/6] Add initial support " Matwey V. Kornilov
6 siblings, 1 reply; 52+ messages in thread
From: Matwey V. Kornilov @ 2019-06-01 14:47 UTC (permalink / raw)
To: u-boot
Add build notes for Pine64 Rock64 board.
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
---
doc/README.rockchip | 30 ++++++++++++++++++++++++++++--
1 file changed, 28 insertions(+), 2 deletions(-)
diff --git a/doc/README.rockchip b/doc/README.rockchip
index ca4d6473b0..eacedbddf4 100644
--- a/doc/README.rockchip
+++ b/doc/README.rockchip
@@ -48,9 +48,10 @@ Two RK3036 boards are supported:
- EVB RK3036 - use evb-rk3036 configuration
- Kylin - use kylin_rk3036 configuration
-One RK3328 board is supported:
+Two RK3328 board are supported:
- - EVB RK3328
+ - EVB RK3328 - use evb-rk3328_defconfig
+ - Pine64 Rock64 board - use rock64-rk3328_defconfig
Size RK3399 boards are supported (aarch64):
@@ -307,6 +308,31 @@ tools/mkimage -n rk3188 -T rksd -d spl/u-boot-spl.bin out
truncate -s %2048 u-boot.bin
cat u-boot.bin | split -b 512 --filter='openssl rc4 -K 7C4E0304550509072D2C7B38170D1711' >> out
+Booting from an SD card on Pine64 Rock64 (RK3328)
+=================================================
+
+For Rock64 rk3328 board the following three parts are required:
+TPL, SPL, and the u-boot image tree blob. While u-boot-spl.bin and
+u-boot.itb are to be compiled as usual, TPL is currently not
+implemented in u-boot, so you need to pick one from rkbin:
+
+ - Get the rkbin
+
+ => git clone https://github.com/rockchip-linux/rkbin.git
+
+ - Create TPL/SPL image
+
+ => tools/mkimage -n rk3328 -T rksd -d rkbin/bin/rk33/rk3328_ddr_333MHz_v1.16.bin idbloader.img
+ => cat spl/u-boot-spl.bin >> idbloader.img
+
+ - Write TPL/SPL image at 64 sector
+
+ => sudo dd if=idbloader.img of=/dev/mmcblk0 seek=64
+
+ - Write u-boot image tree blob at 16384 sector
+
+ => sudo dd if=u-boot.itb of=/dev/mmcblk0 seek=16384
+
Booting from an SD card on RK3399
=================================
--
2.16.4
^ permalink raw reply related [flat|nested] 52+ messages in thread* [U-Boot] [PATCH v3 6/6] doc: rockchip: Add note for Pine64 Rock64 board
2019-06-01 14:47 ` [U-Boot] [PATCH v3 6/6] doc: rockchip: Add note for Pine64 Rock64 board Matwey V. Kornilov
@ 2019-06-04 2:48 ` Kever Yang
0 siblings, 0 replies; 52+ messages in thread
From: Kever Yang @ 2019-06-04 2:48 UTC (permalink / raw)
To: u-boot
On 06/01/2019 10:47 PM, Matwey V. Kornilov wrote:
> Add build notes for Pine64 Rock64 board.
>
> Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
> ---
> doc/README.rockchip | 30 ++++++++++++++++++++++++++++--
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Thanks,
- Kever
> 1 file changed, 28 insertions(+), 2 deletions(-)
>
> diff --git a/doc/README.rockchip b/doc/README.rockchip
> index ca4d6473b0..eacedbddf4 100644
> --- a/doc/README.rockchip
> +++ b/doc/README.rockchip
> @@ -48,9 +48,10 @@ Two RK3036 boards are supported:
> - EVB RK3036 - use evb-rk3036 configuration
> - Kylin - use kylin_rk3036 configuration
>
> -One RK3328 board is supported:
> +Two RK3328 board are supported:
>
> - - EVB RK3328
> + - EVB RK3328 - use evb-rk3328_defconfig
> + - Pine64 Rock64 board - use rock64-rk3328_defconfig
>
> Size RK3399 boards are supported (aarch64):
>
> @@ -307,6 +308,31 @@ tools/mkimage -n rk3188 -T rksd -d spl/u-boot-spl.bin out
> truncate -s %2048 u-boot.bin
> cat u-boot.bin | split -b 512 --filter='openssl rc4 -K 7C4E0304550509072D2C7B38170D1711' >> out
>
> +Booting from an SD card on Pine64 Rock64 (RK3328)
> +=================================================
> +
> +For Rock64 rk3328 board the following three parts are required:
> +TPL, SPL, and the u-boot image tree blob. While u-boot-spl.bin and
> +u-boot.itb are to be compiled as usual, TPL is currently not
> +implemented in u-boot, so you need to pick one from rkbin:
> +
> + - Get the rkbin
> +
> + => git clone https://github.com/rockchip-linux/rkbin.git
> +
> + - Create TPL/SPL image
> +
> + => tools/mkimage -n rk3328 -T rksd -d rkbin/bin/rk33/rk3328_ddr_333MHz_v1.16.bin idbloader.img
> + => cat spl/u-boot-spl.bin >> idbloader.img
> +
> + - Write TPL/SPL image at 64 sector
> +
> + => sudo dd if=idbloader.img of=/dev/mmcblk0 seek=64
> +
> + - Write u-boot image tree blob at 16384 sector
> +
> + => sudo dd if=u-boot.itb of=/dev/mmcblk0 seek=16384
> +
> Booting from an SD card on RK3399
> =================================
>
^ permalink raw reply [flat|nested] 52+ messages in thread
* [U-Boot] [PATCH v4 0/6] Add initial support for Pine64 Rock64 board
2019-06-01 14:47 ` [U-Boot] [PATCH v3 0/6] " Matwey V. Kornilov
` (5 preceding siblings ...)
2019-06-01 14:47 ` [U-Boot] [PATCH v3 6/6] doc: rockchip: Add note for Pine64 Rock64 board Matwey V. Kornilov
@ 2019-06-08 21:27 ` Matwey V. Kornilov
2019-06-08 21:27 ` [U-Boot] [PATCH v4 1/6] rockchip: rk3328: add SPL board file support Matwey V. Kornilov
` (5 more replies)
6 siblings, 6 replies; 52+ messages in thread
From: Matwey V. Kornilov @ 2019-06-08 21:27 UTC (permalink / raw)
To: u-boot
This series adds initial basic support for Pine64 Rock64 board.
The ROCK64 is a credit card size SBC based on Rockchip RK3328 Quad-Core ARM Cortex A53.
This series allow building u-boot SPL and u-boot.itb for Rock64 board.
Unfortunately, proprietary TPL is stil required for deploy:
./tools/mkimage -n rk3328 -T rksd -d ./rkbin/bin/rk33/rk3328_ddr_333MHz_v1.14.bin idbloader.img
cat ./spl/u-boot-spl.bin >> idbloader.img
dd if=idbloader.img of=/dev/sdcard seek=64 conv=notrunc
dd if=u-boot.itb of=/dev/sdcard seek=16384 conv=notrunc
The series has been tested with ATF v1.6.
Some patches in the series are taken from https://github.com/rockchip-linux/u-boot
Credits are given in each patch separately.
Changes since v3:
- add the entry to board/rockchip/evb_rk3328/MAINTAINERS
Changes since v2:
- add deploy documentation to doc/README.rockchip
- fix broken evb-rk3328 build
Changes since v1:
- reword messages for commit 2,4,5
- set SPL_REVERVE_IRAM to 0x40000
- add spl-boot-order to rk3328-rock64-u-boot.dtsi
Kever Yang (3):
rockchip: rk3328: add SPL board file support
rockchip: rk3328: add SPL support
rockchip: Kconfig: enable SPL support for rk3328
Matwey V. Kornilov (3):
rockchip: dts: rk3328: add rk3328-rock64.dts
rockchip: rk3328: add rock64-rk3328_defconfig
doc: rockchip: Add note for Pine64 Rock64 board
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/rk3328-rock64-u-boot.dtsi | 34 ++++
arch/arm/dts/rk3328-rock64.dts | 294 ++++++++++++++++++++++++++++++
arch/arm/mach-rockchip/Kconfig | 7 +
arch/arm/mach-rockchip/Makefile | 1 +
arch/arm/mach-rockchip/rk3328-board-spl.c | 59 ++++++
board/rockchip/evb_rk3328/MAINTAINERS | 6 +
configs/evb-rk3328_defconfig | 7 +
configs/rock64-rk3328_defconfig | 91 +++++++++
doc/README.rockchip | 30 ++-
include/configs/rk3328_common.h | 4 +
11 files changed, 533 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/dts/rk3328-rock64-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3328-rock64.dts
create mode 100644 arch/arm/mach-rockchip/rk3328-board-spl.c
create mode 100644 configs/rock64-rk3328_defconfig
--
2.16.4
^ permalink raw reply [flat|nested] 52+ messages in thread* [U-Boot] [PATCH v4 1/6] rockchip: rk3328: add SPL board file support
2019-06-08 21:27 ` [U-Boot] [PATCH v4 0/6] Add initial support " Matwey V. Kornilov
@ 2019-06-08 21:27 ` Matwey V. Kornilov
2019-06-08 21:27 ` [U-Boot] [PATCH v4 2/6] rockchip: rk3328: add SPL support Matwey V. Kornilov
` (4 subsequent siblings)
5 siblings, 0 replies; 52+ messages in thread
From: Matwey V. Kornilov @ 2019-06-08 21:27 UTC (permalink / raw)
To: u-boot
From: Kever Yang <kever.yang@rock-chips.com>
rk3328 SPL is locate at dram, so do not have strict size limit,
suppose to enable storage media controller driver, load ATF and
U-Boot, then boot into ATF.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
[cherry picked from https://github.com/rockchip-linux/u-boot/commit/4ebe3968b683190cb8e5741aa7227b4fa7497874 with minor modifications]
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
---
arch/arm/mach-rockchip/Makefile | 1 +
arch/arm/mach-rockchip/rk3328-board-spl.c | 59 +++++++++++++++++++++++++++++++
2 files changed, 60 insertions(+)
create mode 100644 arch/arm/mach-rockchip/rk3328-board-spl.c
diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile
index 846c82d70a..23760a959a 100644
--- a/arch/arm/mach-rockchip/Makefile
+++ b/arch/arm/mach-rockchip/Makefile
@@ -18,6 +18,7 @@ obj-spl-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o
obj-spl-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board-spl.o
obj-spl-$(CONFIG_ROCKCHIP_RK322X) += rk322x-board-spl.o spl-boot-order.o
obj-spl-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board-spl.o
+obj-spl-$(CONFIG_ROCKCHIP_RK3328) += rk3328-board-spl.o
obj-spl-$(CONFIG_ROCKCHIP_RK3368) += rk3368-board-spl.o spl-boot-order.o
obj-spl-$(CONFIG_ROCKCHIP_RK3399) += rk3399-board-spl.o spl-boot-order.o
diff --git a/arch/arm/mach-rockchip/rk3328-board-spl.c b/arch/arm/mach-rockchip/rk3328-board-spl.c
new file mode 100644
index 0000000000..7f49d056a0
--- /dev/null
+++ b/arch/arm/mach-rockchip/rk3328-board-spl.c
@@ -0,0 +1,59 @@
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <debug_uart.h>
+#include <dm.h>
+#include <dm/pinctrl.h>
+#include <ram.h>
+#include <spl.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void board_debug_uart_init(void)
+{
+}
+
+void board_init_f(ulong dummy)
+{
+ struct udevice *dev;
+ int ret;
+
+ ret = spl_early_init();
+ if (ret) {
+ debug("spl_early_init() failed: %d\n", ret);
+ hang();
+ }
+
+ preloader_console_init();
+
+ ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+ if (ret) {
+ debug("DRAM init failed: %d\n", ret);
+ return;
+ }
+}
+
+u32 spl_boot_mode(const u32 boot_device)
+{
+ return MMCSD_MODE_RAW;
+}
+
+u32 spl_boot_device(void)
+{
+ return BOOT_DEVICE_MMC1;
+}
+
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
+{
+ /* Just empty function now - can't decide what to choose */
+ debug("%s: %s\n", __func__, name);
+
+ return 0;
+}
+#endif
--
2.16.4
^ permalink raw reply related [flat|nested] 52+ messages in thread* [U-Boot] [PATCH v4 2/6] rockchip: rk3328: add SPL support
2019-06-08 21:27 ` [U-Boot] [PATCH v4 0/6] Add initial support " Matwey V. Kornilov
2019-06-08 21:27 ` [U-Boot] [PATCH v4 1/6] rockchip: rk3328: add SPL board file support Matwey V. Kornilov
@ 2019-06-08 21:27 ` Matwey V. Kornilov
2019-06-08 21:27 ` [U-Boot] [PATCH v4 3/6] rockchip: Kconfig: enable SPL support for rk3328 Matwey V. Kornilov
` (3 subsequent siblings)
5 siblings, 0 replies; 52+ messages in thread
From: Matwey V. Kornilov @ 2019-06-08 21:27 UTC (permalink / raw)
To: u-boot
From: Kever Yang <kever.yang@rock-chips.com>
Add SPL support for rk3328, default with of-platdata enabled.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
[cherry picked from https://github.com/rockchip-linux/u-boot/commit/cb2b7a1bc75ebb116b1eb9b0ae0223e84d86fc4b with minor modifications]
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
---
include/configs/rk3328_common.h | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/include/configs/rk3328_common.h b/include/configs/rk3328_common.h
index 71aad7029a..2a81c803b6 100644
--- a/include/configs/rk3328_common.h
+++ b/include/configs/rk3328_common.h
@@ -16,6 +16,10 @@
#define CONFIG_SYS_INIT_SP_ADDR 0x00300000
#define CONFIG_SYS_LOAD_ADDR 0x00800800
+#define CONFIG_SPL_STACK 0x00400000
+#define CONFIG_SPL_MAX_SIZE 0x100000
+#define CONFIG_SPL_BSS_START_ADDR 0x2000000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x2000
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */
--
2.16.4
^ permalink raw reply related [flat|nested] 52+ messages in thread* [U-Boot] [PATCH v4 3/6] rockchip: Kconfig: enable SPL support for rk3328
2019-06-08 21:27 ` [U-Boot] [PATCH v4 0/6] Add initial support " Matwey V. Kornilov
2019-06-08 21:27 ` [U-Boot] [PATCH v4 1/6] rockchip: rk3328: add SPL board file support Matwey V. Kornilov
2019-06-08 21:27 ` [U-Boot] [PATCH v4 2/6] rockchip: rk3328: add SPL support Matwey V. Kornilov
@ 2019-06-08 21:27 ` Matwey V. Kornilov
2019-06-08 21:27 ` [U-Boot] [PATCH v4 4/6] rockchip: dts: rk3328: add rk3328-rock64.dts Matwey V. Kornilov
` (2 subsequent siblings)
5 siblings, 0 replies; 52+ messages in thread
From: Matwey V. Kornilov @ 2019-06-08 21:27 UTC (permalink / raw)
To: u-boot
From: Kever Yang <kever.yang@rock-chips.com>
Enable SPL support and some related option in Kconfig.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
[cherry picked from https://github.com/rockchip-linux/u-boot/commit/430b01462bf3f24aaf7920ae2587a6943c39ab5d with minor modifications]
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
---
arch/arm/mach-rockchip/Kconfig | 7 +++++++
configs/evb-rk3328_defconfig | 7 +++++++
2 files changed, 14 insertions(+)
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index c05e3c3f48..3e38344b50 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -109,6 +109,13 @@ endif
config ROCKCHIP_RK3328
bool "Support Rockchip RK3328"
select ARM64
+ select SUPPORT_SPL
+ select SPL
+ imply SPL_SERIAL_SUPPORT
+ imply SPL_SEPARATE_BSS
+ select ENABLE_ARM_SOC_BOOT0_HOOK
+ select DEBUG_UART_BOARD_INIT
+ select SYS_NS16550
help
The Rockchip RK3328 is a ARM-based SoC with a quad-core Cortex-A53.
including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two
diff --git a/configs/evb-rk3328_defconfig b/configs/evb-rk3328_defconfig
index aff9c32362..92d6817ad5 100644
--- a/configs/evb-rk3328_defconfig
+++ b/configs/evb-rk3328_defconfig
@@ -1,7 +1,10 @@
CONFIG_ARM=y
CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_ROCKCHIP_RK3328=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_DEBUG_UART_BASE=0xFF130000
CONFIG_DEBUG_UART_CLOCK=24000000
@@ -19,11 +22,15 @@ CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TIME=y
CONFIG_DEFAULT_DEVICE_TREE="rk3328-evb"
+CONFIG_SPL_OF_CONTROL=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
CONFIG_CLK=y
+CONFIG_SPL_CLK=y
CONFIG_FASTBOOT_BUF_ADDR=0x800800
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=1
--
2.16.4
^ permalink raw reply related [flat|nested] 52+ messages in thread* [U-Boot] [PATCH v4 4/6] rockchip: dts: rk3328: add rk3328-rock64.dts
2019-06-08 21:27 ` [U-Boot] [PATCH v4 0/6] Add initial support " Matwey V. Kornilov
` (2 preceding siblings ...)
2019-06-08 21:27 ` [U-Boot] [PATCH v4 3/6] rockchip: Kconfig: enable SPL support for rk3328 Matwey V. Kornilov
@ 2019-06-08 21:27 ` Matwey V. Kornilov
2019-06-08 21:27 ` [U-Boot] [PATCH v4 5/6] rockchip: rk3328: add rock64-rk3328_defconfig Matwey V. Kornilov
2019-06-08 21:27 ` [U-Boot] [PATCH v4 6/6] doc: rockchip: Add note for Pine64 Rock64 board Matwey V. Kornilov
5 siblings, 0 replies; 52+ messages in thread
From: Matwey V. Kornilov @ 2019-06-08 21:27 UTC (permalink / raw)
To: u-boot
rk3328-rock64.dts has been taken from Linux kernel commit
cff6d1d6f88b ("arm64: dts: rockchip: enable HS200 for eMMC on rock64")
with minor modifications (drop nodes not known by rk3328.dtsi).
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
---
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/rk3328-rock64-u-boot.dtsi | 34 ++++
arch/arm/dts/rk3328-rock64.dts | 294 +++++++++++++++++++++++++++++++++
3 files changed, 330 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/dts/rk3328-rock64-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3328-rock64.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index e0c54bfa76..19499ddfc6 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -93,7 +93,8 @@ dtb-$(CONFIG_ROCKCHIP_RK3288) += \
rk3288-vyasa.dtb
dtb-$(CONFIG_ROCKCHIP_RK3328) += \
- rk3328-evb.dtb
+ rk3328-evb.dtb \
+ rk3328-rock64.dtb
dtb-$(CONFIG_ROCKCHIP_RK3368) += \
rk3368-lion.dtb \
diff --git a/arch/arm/dts/rk3328-rock64-u-boot.dtsi b/arch/arm/dts/rk3328-rock64-u-boot.dtsi
new file mode 100644
index 0000000000..b077436cbc
--- /dev/null
+++ b/arch/arm/dts/rk3328-rock64-u-boot.dtsi
@@ -0,0 +1,34 @@
+/*
+ * (C) Copyright 2018 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/ {
+ aliases {
+ mmc0 = &emmc;
+ mmc1 = &sdmmc;
+ };
+
+ chosen {
+ u-boot,spl-boot-order = &emmc, &sdmmc;
+ };
+};
+
+&cru {
+ u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+ u-boot,dm-pre-reloc;
+};
+
+&emmc {
+ u-boot,dm-pre-reloc;
+ fifo-mode;
+};
+
+&sdmmc {
+ u-boot,dm-pre-reloc;
+ fifo-mode;
+};
diff --git a/arch/arm/dts/rk3328-rock64.dts b/arch/arm/dts/rk3328-rock64.dts
new file mode 100644
index 0000000000..7bcc53fcce
--- /dev/null
+++ b/arch/arm/dts/rk3328-rock64.dts
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 PINE64
+ */
+
+/dts-v1/;
+#include "rk3328.dtsi"
+
+/ {
+ model = "Pine64 Rock64";
+ compatible = "pine64,rock64", "rockchip,rk3328";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ gmac_clkin: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "gmac_clkin";
+ #clock-cells = <0>;
+ };
+
+ vcc_sd: sdmmc-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0m1_gpio>;
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_io>;
+ };
+
+ vcc_host_5v: vcc-host-5v-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb30_host_drv>;
+ regulator-name = "vcc_host_5v";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb20_host_drv>;
+ regulator-name = "vcc_host1_5v";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+ vmmc-supply = <&vcc_io>;
+ vqmmc-supply = <&vcc18_emmc>;
+ status = "okay";
+};
+
+&gmac2io {
+ assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+ assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
+ clock_in_out = "input";
+ phy-supply = <&vcc_io>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmiim1_pins>;
+ snps,force_thresh_dma_mode;
+ snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x24>;
+ rx_delay = <0x18>;
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ rk805: rk805 at 18 {
+ compatible = "rockchip,rk805";
+ reg = <0x18>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk805-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc5-supply = <&vcc_io>;
+ vcc6-supply = <&vcc_sys>;
+
+ regulators {
+ vdd_logic: DCDC_REG1 {
+ regulator-name = "vdd_logic";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1450000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vdd_arm: DCDC_REG2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1450000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-name = "vcc_io";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_18: LDO_REG1 {
+ regulator-name = "vdd_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc18_emmc: LDO_REG2 {
+ regulator-name = "vcc_18emmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-name = "vdd_10";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+ };
+ };
+};
+
+&io_domains {
+ status = "okay";
+
+ vccio1-supply = <&vcc_io>;
+ vccio2-supply = <&vcc18_emmc>;
+ vccio3-supply = <&vcc_io>;
+ vccio4-supply = <&vcc_18>;
+ vccio5-supply = <&vcc_io>;
+ vccio6-supply = <&vcc_io>;
+ pmuio-supply = <&vcc_io>;
+};
+
+&pinctrl {
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb2 {
+ usb20_host_drv: usb20-host-drv {
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb3 {
+ usb30_host_drv: usb30-host-drv {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+ vmmc-supply = <&vcc_sd>;
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ spiflash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+
+ /* maximum speed for Rockchip SPI */
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb20_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
--
2.16.4
^ permalink raw reply related [flat|nested] 52+ messages in thread* [U-Boot] [PATCH v4 5/6] rockchip: rk3328: add rock64-rk3328_defconfig
2019-06-08 21:27 ` [U-Boot] [PATCH v4 0/6] Add initial support " Matwey V. Kornilov
` (3 preceding siblings ...)
2019-06-08 21:27 ` [U-Boot] [PATCH v4 4/6] rockchip: dts: rk3328: add rk3328-rock64.dts Matwey V. Kornilov
@ 2019-06-08 21:27 ` Matwey V. Kornilov
2019-06-18 7:47 ` Kever Yang
2019-06-08 21:27 ` [U-Boot] [PATCH v4 6/6] doc: rockchip: Add note for Pine64 Rock64 board Matwey V. Kornilov
5 siblings, 1 reply; 52+ messages in thread
From: Matwey V. Kornilov @ 2019-06-08 21:27 UTC (permalink / raw)
To: u-boot
The ROCK64 is a credit card size SBC based on Rockchip RK3328
Quad-Core ARM Cortex A53.
This series allow building u-boot SPL and u-boot.itb for Rock64
board. The proprietary TPL is stil required for deploy:
./tools/mkimage -n rk3328 -T rksd \
-d ./rkbin/bin/rk33/rk3328_ddr_333MHz_v1.16.bin idbloader.img
cat ./spl/u-boot-spl.bin >> idbloader.img
dd if=idbloader.img of=/dev/sdcard seek=64 conv=notrunc
dd if=u-boot.itb of=/dev/sdcard seek=16384 conv=notrunc
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
---
board/rockchip/evb_rk3328/MAINTAINERS | 6 +++
configs/rock64-rk3328_defconfig | 91 +++++++++++++++++++++++++++++++++++
2 files changed, 97 insertions(+)
create mode 100644 configs/rock64-rk3328_defconfig
diff --git a/board/rockchip/evb_rk3328/MAINTAINERS b/board/rockchip/evb_rk3328/MAINTAINERS
index 2ee6e462a6..c661d2e06a 100644
--- a/board/rockchip/evb_rk3328/MAINTAINERS
+++ b/board/rockchip/evb_rk3328/MAINTAINERS
@@ -4,3 +4,9 @@ S: Maintained
F: board/rockchip/evb_rk3328
F: include/configs/evb_rk3328.h
F: configs/evb-rk3328_defconfig
+
+ROCK64-RK3328
+M: Matwey V. Kornilov <matwey.kornilov@gmail.com>
+S: Maintained
+F: configs/rock64-rk3328_defconfig
+F: arch/arm/dts/rk3328-rock64-u-boot.dtsi
diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig
new file mode 100644
index 0000000000..6529dedfb6
--- /dev/null
+++ b/configs/rock64-rk3328_defconfig
@@ -0,0 +1,91 @@
+CONFIG_SMBIOS_MANUFACTURER="pine64"
+CONFIG_SMBIOS_PRODUCT_NAME="rock64_rk3328"
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_ROCKCHIP_RK3328=y
+CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x40000
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_DEBUG_UART_BASE=0xFF130000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART=y
+CONFIG_NR_DRAM_BANKS=1
+# CONFIG_ANDROID_BOOT_IMAGE is not set
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-rock64.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_ATF=y
+CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
+CONFIG_FASTBOOT_BUF_ADDR=0x800800
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=1
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock64"
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_SPI_FLASH=y
+CONFIG_SF_DEFAULT_SPEED=20000000
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PHY=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_ROCKCHIP_RK3328=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_DM_RESET=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
+CONFIG_USB_GADGET_VENDOR_NUM=0x2207
+CONFIG_USB_GADGET_PRODUCT_NUM=0x330a
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_ERRNO_STR=y
--
2.16.4
^ permalink raw reply related [flat|nested] 52+ messages in thread* [U-Boot] [PATCH v4 5/6] rockchip: rk3328: add rock64-rk3328_defconfig
2019-06-08 21:27 ` [U-Boot] [PATCH v4 5/6] rockchip: rk3328: add rock64-rk3328_defconfig Matwey V. Kornilov
@ 2019-06-18 7:47 ` Kever Yang
0 siblings, 0 replies; 52+ messages in thread
From: Kever Yang @ 2019-06-18 7:47 UTC (permalink / raw)
To: u-boot
On 06/09/2019 05:27 AM, Matwey V. Kornilov wrote:
> The ROCK64 is a credit card size SBC based on Rockchip RK3328
> Quad-Core ARM Cortex A53.
>
> This series allow building u-boot SPL and u-boot.itb for Rock64
> board. The proprietary TPL is stil required for deploy:
>
> ./tools/mkimage -n rk3328 -T rksd \
> -d ./rkbin/bin/rk33/rk3328_ddr_333MHz_v1.16.bin idbloader.img
> cat ./spl/u-boot-spl.bin >> idbloader.img
> dd if=idbloader.img of=/dev/sdcard seek=64 conv=notrunc
> dd if=u-boot.itb of=/dev/sdcard seek=16384 conv=notrunc
>
> Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Thanks,
- Kever
> ---
> board/rockchip/evb_rk3328/MAINTAINERS | 6 +++
> configs/rock64-rk3328_defconfig | 91 +++++++++++++++++++++++++++++++++++
> 2 files changed, 97 insertions(+)
> create mode 100644 configs/rock64-rk3328_defconfig
>
> diff --git a/board/rockchip/evb_rk3328/MAINTAINERS b/board/rockchip/evb_rk3328/MAINTAINERS
> index 2ee6e462a6..c661d2e06a 100644
> --- a/board/rockchip/evb_rk3328/MAINTAINERS
> +++ b/board/rockchip/evb_rk3328/MAINTAINERS
> @@ -4,3 +4,9 @@ S: Maintained
> F: board/rockchip/evb_rk3328
> F: include/configs/evb_rk3328.h
> F: configs/evb-rk3328_defconfig
> +
> +ROCK64-RK3328
> +M: Matwey V. Kornilov <matwey.kornilov@gmail.com>
> +S: Maintained
> +F: configs/rock64-rk3328_defconfig
> +F: arch/arm/dts/rk3328-rock64-u-boot.dtsi
> diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig
> new file mode 100644
> index 0000000000..6529dedfb6
> --- /dev/null
> +++ b/configs/rock64-rk3328_defconfig
> @@ -0,0 +1,91 @@
> +CONFIG_SMBIOS_MANUFACTURER="pine64"
> +CONFIG_SMBIOS_PRODUCT_NAME="rock64_rk3328"
> +CONFIG_ARM=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SYS_MALLOC_F_LEN=0x2000
> +CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_ROCKCHIP_RK3328=y
> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x40000
> +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
> +CONFIG_SPL_STACK_R_ADDR=0x600000
> +CONFIG_DEBUG_UART_BASE=0xFF130000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_DEBUG_UART=y
> +CONFIG_NR_DRAM_BANKS=1
> +# CONFIG_ANDROID_BOOT_IMAGE is not set
> +CONFIG_FIT=y
> +CONFIG_FIT_VERBOSE=y
> +CONFIG_SPL_LOAD_FIT=y
> +CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-rock64.dtb"
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_ATF=y
> +CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> +CONFIG_FASTBOOT_BUF_ADDR=0x800800
> +CONFIG_FASTBOOT_FLASH=y
> +CONFIG_FASTBOOT_FLASH_MMC_DEV=1
> +CONFIG_CMD_BOOTZ=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_TIME=y
> +CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock64"
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_REGMAP=y
> +CONFIG_SPL_REGMAP=y
> +CONFIG_SYSCON=y
> +CONFIG_SPL_SYSCON=y
> +CONFIG_CLK=y
> +CONFIG_SPL_CLK=y
> +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_SF_DEFAULT_SPEED=20000000
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PHY=y
> +CONFIG_PINCTRL=y
> +CONFIG_SPL_PINCTRL=y
> +CONFIG_PINCTRL_ROCKCHIP_RK3328=y
> +CONFIG_DM_PMIC=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_RAM=y
> +CONFIG_SPL_RAM=y
> +CONFIG_DM_RESET=y
> +CONFIG_BAUDRATE=1500000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_OHCI_HCD=y
> +CONFIG_USB_OHCI_GENERIC=y
> +CONFIG_USB_DWC2=y
> +CONFIG_USB_DWC3=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
> +CONFIG_USB_GADGET_VENDOR_NUM=0x2207
> +CONFIG_USB_GADGET_PRODUCT_NUM=0x330a
> +CONFIG_USB_GADGET_DWC2_OTG=y
> +CONFIG_USE_TINY_PRINTF=y
> +CONFIG_SPL_TINY_MEMSET=y
> +CONFIG_ERRNO_STR=y
^ permalink raw reply [flat|nested] 52+ messages in thread
* [U-Boot] [PATCH v4 6/6] doc: rockchip: Add note for Pine64 Rock64 board
2019-06-08 21:27 ` [U-Boot] [PATCH v4 0/6] Add initial support " Matwey V. Kornilov
` (4 preceding siblings ...)
2019-06-08 21:27 ` [U-Boot] [PATCH v4 5/6] rockchip: rk3328: add rock64-rk3328_defconfig Matwey V. Kornilov
@ 2019-06-08 21:27 ` Matwey V. Kornilov
5 siblings, 0 replies; 52+ messages in thread
From: Matwey V. Kornilov @ 2019-06-08 21:27 UTC (permalink / raw)
To: u-boot
Add build notes for Pine64 Rock64 board.
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
---
doc/README.rockchip | 30 ++++++++++++++++++++++++++++--
1 file changed, 28 insertions(+), 2 deletions(-)
diff --git a/doc/README.rockchip b/doc/README.rockchip
index 264f7e4994..11ab74a103 100644
--- a/doc/README.rockchip
+++ b/doc/README.rockchip
@@ -48,9 +48,10 @@ Two RK3036 boards are supported:
- EVB RK3036 - use evb-rk3036 configuration
- Kylin - use kylin_rk3036 configuration
-One RK3328 board is supported:
+Two RK3328 board are supported:
- - EVB RK3328
+ - EVB RK3328 - use evb-rk3328_defconfig
+ - Pine64 Rock64 board - use rock64-rk3328_defconfig
Size RK3399 boards are supported (aarch64):
@@ -310,6 +311,31 @@ tools/mkimage -n rk3188 -T rksd -d spl/u-boot-spl.bin out
truncate -s %2048 u-boot.bin
cat u-boot.bin | split -b 512 --filter='openssl rc4 -K 7C4E0304550509072D2C7B38170D1711' >> out
+Booting from an SD card on Pine64 Rock64 (RK3328)
+=================================================
+
+For Rock64 rk3328 board the following three parts are required:
+TPL, SPL, and the u-boot image tree blob. While u-boot-spl.bin and
+u-boot.itb are to be compiled as usual, TPL is currently not
+implemented in u-boot, so you need to pick one from rkbin:
+
+ - Get the rkbin
+
+ => git clone https://github.com/rockchip-linux/rkbin.git
+
+ - Create TPL/SPL image
+
+ => tools/mkimage -n rk3328 -T rksd -d rkbin/bin/rk33/rk3328_ddr_333MHz_v1.16.bin idbloader.img
+ => cat spl/u-boot-spl.bin >> idbloader.img
+
+ - Write TPL/SPL image at 64 sector
+
+ => sudo dd if=idbloader.img of=/dev/mmcblk0 seek=64
+
+ - Write u-boot image tree blob at 16384 sector
+
+ => sudo dd if=u-boot.itb of=/dev/mmcblk0 seek=16384
+
Booting from an SD card on RK3399
=================================
--
2.16.4
^ permalink raw reply related [flat|nested] 52+ messages in thread