[U-Boot] [PATCH v2 2/4] mx6cuboxi: Add USB host support

[Vagrant Cascadian <vagrant@aikidev.net>]

On 2015-04-30, Fabio Estevam wrote:
> On Thu, Apr 30, 2015 at 6:26 PM, Vagrant Cascadian <vagrant@aikidev.net> wrote:
>
>> Removing those options broke network boot.  With this patch, u-boot
>> reports:
>>
>>   Net:   Phy 0 not found
>>
>> And the dhcp command fails to get an ip address.
>>
>> With both CONFIG_USB_HOST_ETHER and CONFIG_USB_ETHER_ASIX defined in
>> mx6cuboxi.h, u-boot reports:
>>
>>   Net:   FEC
>>
>> And then the dhcp command works as expected...
>>
>> Perhaps the CONFIG_USB*ETHER options conditionall enable some other
>> feature that FEC depends on?

After trying this several times, that build of u-boot no longer works
either.


> Could you try?
>
> => setenv ethaddr
> => save
> => reset

No change.


> TFTP transfer is working fine here.

It was working here too, and now it doesn't. I clearly misdiagnosed the
cause...


live well,
  vagrant
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 818 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150430/a584c7e4/attachment.sig>