From mboxrd@z Thu Jan 1 00:00:00 1970 From: Vagrant Cascadian Date: Thu, 30 Apr 2015 15:20:00 -0700 Subject: [U-Boot] [PATCH v2 2/4] mx6cuboxi: Add USB host support In-Reply-To: References: <1430357292-8062-1-git-send-email-festevam@gmail.com> <1430357292-8062-2-git-send-email-festevam@gmail.com> <87d22lux28.fsf@aikidev.net> Message-ID: <874mnxuulr.fsf@aikidev.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 2015-04-30, Fabio Estevam wrote: > On Thu, Apr 30, 2015 at 6:26 PM, Vagrant Cascadian wrote: > >> Removing those options broke network boot. With this patch, u-boot >> reports: >> >> Net: Phy 0 not found >> >> And the dhcp command fails to get an ip address. >> >> With both CONFIG_USB_HOST_ETHER and CONFIG_USB_ETHER_ASIX defined in >> mx6cuboxi.h, u-boot reports: >> >> Net: FEC >> >> And then the dhcp command works as expected... >> >> Perhaps the CONFIG_USB*ETHER options conditionall enable some other >> feature that FEC depends on? After trying this several times, that build of u-boot no longer works either. > Could you try? > > => setenv ethaddr > => save > => reset No change. > TFTP transfer is working fine here. It was working here too, and now it doesn't. I clearly misdiagnosed the cause... live well, vagrant -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 818 bytes Desc: not available URL: