From mboxrd@z Thu Jan 1 00:00:00 1970 From: Markus =?iso-8859-1?Q?Klotzb=FCcher?= Date: Mon, 19 Nov 2007 16:04:55 +0100 Subject: [U-Boot-Users] Problems with usb storage devices on MPC5200 / TQM5200 In-Reply-To: <47F3F98010FF784EBEE6526EAAB078D1024F87B1@tq-mailsrv.tq-net.de> (Martin Krause's message of "Tue, 6 Nov 2007 14:24:35 +0100") References: <47F3F98010FF784EBEE6526EAAB078D1024F87B1@tq-mailsrv.tq-net.de> Message-ID: <874pfiuvhk.fsf@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Martin, "Martin Krause" writes: > with the current U-Boot (top of tree) I'm not able to access an USB > memory stick on a MPC5200 based TQM5200 board. The 'usb start' > command prints some error messages: ... > Has anyone observed similar problems with the generic OHCI driver? Can you confirm that it worked before with the generic driver and the same stick? Only few usb related changes were merged recently, so it if it did break, it shouldn't be hard to identify the culprit. Best regards Markus Klotzbuecher -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de