[U-Boot] [PATCH 0/3] armv8/fsl-layerscape: add dwc3 gadget driver support

[U-Boot] [PATCH 0/3] armv8/fsl-layerscape: add dwc3 gadget driver support

[Rajat Srivastava]

Adds support for dwc3 gadget driver for ARM v8 platform of layerscape
series. Currently this patch has been tested for LS1043A. 

Rajat Srivastava (3):
  usb: ums: support multiple controllers using controller_index
  armv8/fsl-layerscape: add dwc3 gadget driver support
  armv8/fsl-layerscape: enable dwc3 gadget driver support

 arch/arm/cpu/armv8/fsl-layerscape/soc.c            | 87 +++++++++++++++++++++-
 .../include/asm/arch-fsl-layerscape/immap_lsch2.h  |  6 ++
 .../include/asm/arch-fsl-layerscape/sys_proto.h    | 11 +++
 cmd/usb_mass_storage.c                             |  2 +-
 drivers/usb/dwc3/core.c                            | 12 +++
 drivers/usb/gadget/f_mass_storage.c                | 10 ++-
 include/configs/ls1043aqds.h                       | 15 ++++
 7 files changed, 139 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/sys_proto.h

-- 
1.9.1

[U-Boot] [PATCH 1/3] usb: ums: support multiple controllers using controller_index

[Rajat Srivastava]

From: Rajesh Bhagat <rajesh.bhagat@nxp.com>

Adds a new field in fsg_common namely controller_index to support
multiple controllers usb gadget support.

Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
---
 cmd/usb_mass_storage.c              |  2 +-
 drivers/usb/gadget/f_mass_storage.c | 10 +++++++++-
 2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/cmd/usb_mass_storage.c b/cmd/usb_mass_storage.c
index b05913a..1c955f8 100644
--- a/cmd/usb_mass_storage.c
+++ b/cmd/usb_mass_storage.c
@@ -214,7 +214,7 @@ int do_usb_mass_storage(cmd_tbl_t *cmdtp, int flag,
 	while (1) {
 		usb_gadget_handle_interrupts(controller_index);
 
-		rc = fsg_main_thread(NULL);
+		rc = fsg_main_thread(&controller_index);
 		if (rc) {
 			/* Check I/O error */
 			if (rc == -EIO)
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 1ecb92a..cc3e4af 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -362,6 +362,7 @@ struct fsg_common {
 	char inquiry_string[8 + 16 + 4 + 1];
 
 	struct kref		ref;
+	unsigned int controller_index;
 };
 
 struct fsg_config {
@@ -691,7 +692,7 @@ static int sleep_thread(struct fsg_common *common)
 			k = 0;
 		}
 
-		usb_gadget_handle_interrupts(0);
+		usb_gadget_handle_interrupts(common->controller_index);
 	}
 	common->thread_wakeup_needed = 0;
 	return rc;
@@ -2406,6 +2407,11 @@ int fsg_main_thread(void *common_)
 {
 	int ret;
 	struct fsg_common	*common = the_fsg_common;
+
+	/* update the controller_index */
+	if (common_)
+		common->controller_index = *(unsigned int *)common_;
+
 	/* The main loop */
 	do {
 		if (exception_in_progress(common)) {
@@ -2476,6 +2482,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
 
 	common->ops = NULL;
 	common->private_data = NULL;
+	common->controller_index = 0;
 
 	common->gadget = gadget;
 	common->ep0 = gadget->ep0;
@@ -2770,6 +2777,7 @@ int fsg_add(struct usb_configuration *c)
 
 	fsg_common->ops = NULL;
 	fsg_common->private_data = NULL;
+	fsg_common->controller_index = 0;
 
 	the_fsg_common = fsg_common;
 
-- 
1.9.1

[U-Boot] [PATCH 1/3] usb: ums: support multiple controllers using controller_index

[Lukasz Majewski]

Hi Rajat,

> From: Rajesh Bhagat <rajesh.bhagat@nxp.com>
> 
> Adds a new field in fsg_common namely controller_index to support
> multiple controllers usb gadget support.
> 
> Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com>
> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
> ---
>  cmd/usb_mass_storage.c              |  2 +-
>  drivers/usb/gadget/f_mass_storage.c | 10 +++++++++-
>  2 files changed, 10 insertions(+), 2 deletions(-)
> 
> diff --git a/cmd/usb_mass_storage.c b/cmd/usb_mass_storage.c
> index b05913a..1c955f8 100644
> --- a/cmd/usb_mass_storage.c
> +++ b/cmd/usb_mass_storage.c
> @@ -214,7 +214,7 @@ int do_usb_mass_storage(cmd_tbl_t *cmdtp, int
> flag, while (1) {
>  		usb_gadget_handle_interrupts(controller_index);
>  
> -		rc = fsg_main_thread(NULL);
> +		rc = fsg_main_thread(&controller_index);

controller_index is defined as unsigned int.

However, fsg_main_thread(void *common_) accepts void * as its parameter.

Could you adjust it to accept unsigned int index parameter?

>  		if (rc) {
>  			/* Check I/O error */
>  			if (rc == -EIO)
> diff --git a/drivers/usb/gadget/f_mass_storage.c
> b/drivers/usb/gadget/f_mass_storage.c index 1ecb92a..cc3e4af 100644
> --- a/drivers/usb/gadget/f_mass_storage.c
> +++ b/drivers/usb/gadget/f_mass_storage.c
> @@ -362,6 +362,7 @@ struct fsg_common {
>  	char inquiry_string[8 + 16 + 4 + 1];
>  
>  	struct kref		ref;
> +	unsigned int controller_index;
>  };
>  
>  struct fsg_config {
> @@ -691,7 +692,7 @@ static int sleep_thread(struct fsg_common *common)
>  			k = 0;
>  		}
>  
> -		usb_gadget_handle_interrupts(0);
> +
> usb_gadget_handle_interrupts(common->controller_index); }
>  	common->thread_wakeup_needed = 0;
>  	return rc;
> @@ -2406,6 +2407,11 @@ int fsg_main_thread(void *common_)
>  {
>  	int ret;
>  	struct fsg_common	*common = the_fsg_common;
> +
> +	/* update the controller_index */
> +	if (common_)

Replace common_ with unsigned int index 

> +		common->controller_index = *(unsigned int *)common_;
> +
>  	/* The main loop */
>  	do {
>  		if (exception_in_progress(common)) {
> @@ -2476,6 +2482,7 @@ static struct fsg_common
> *fsg_common_init(struct fsg_common *common, 
>  	common->ops = NULL;
>  	common->private_data = NULL;
> +	common->controller_index = 0;
>  
>  	common->gadget = gadget;
>  	common->ep0 = gadget->ep0;
> @@ -2770,6 +2777,7 @@ int fsg_add(struct usb_configuration *c)
>  
>  	fsg_common->ops = NULL;
>  	fsg_common->private_data = NULL;
> +	fsg_common->controller_index = 0;
>  
>  	the_fsg_common = fsg_common;
>  



-- 
Best regards,

Lukasz Majewski

Samsung R&D Institute Poland (SRPOL) | Linux Platform Group

[U-Boot] [PATCH 1/3] usb: ums: support multiple controllers using controller_index

[Rajesh Bhagat]

> -----Original Message-----
> From: Lukasz Majewski [mailto:l.majewski at samsung.com]
> Sent: Tuesday, May 31, 2016 8:22 PM
> To: Rajat Srivastava <rajat.srivastava@nxp.com>
> Cc: u-boot at lists.denx.de; sjg at chromium.org; marex at denx.de;
> albert.u.boot at aribaud.net; prabhakar at freescale.com; york sun
> <york.sun@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Rajesh Bhagat
> <rajesh.bhagat@nxp.com>; michal.simek at xilinx.com; felipe.balbi at linux.intel.com
> Subject: Re: [PATCH 1/3] usb: ums: support multiple controllers using
> controller_index
> 
> Hi Rajat,
> 
> > From: Rajesh Bhagat <rajesh.bhagat@nxp.com>
> >
> > Adds a new field in fsg_common namely controller_index to support
> > multiple controllers usb gadget support.
> >
> > Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com>
> > Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
> > ---
> >  cmd/usb_mass_storage.c              |  2 +-
> >  drivers/usb/gadget/f_mass_storage.c | 10 +++++++++-
> >  2 files changed, 10 insertions(+), 2 deletions(-)
> >
> > diff --git a/cmd/usb_mass_storage.c b/cmd/usb_mass_storage.c index
> > b05913a..1c955f8 100644
> > --- a/cmd/usb_mass_storage.c
> > +++ b/cmd/usb_mass_storage.c
> > @@ -214,7 +214,7 @@ int do_usb_mass_storage(cmd_tbl_t *cmdtp, int
> > flag, while (1) {
> >  		usb_gadget_handle_interrupts(controller_index);
> >
> > -		rc = fsg_main_thread(NULL);
> > +		rc = fsg_main_thread(&controller_index);
> 

Hello Lukasz,

> controller_index is defined as unsigned int.
> 
> However, fsg_main_thread(void *common_) accepts void * as its parameter.
> 
> Could you adjust it to accept unsigned int index parameter?
> 

Will take care in v2. 

> >  		if (rc) {
> >  			/* Check I/O error */
> >  			if (rc == -EIO)
> > diff --git a/drivers/usb/gadget/f_mass_storage.c
> > b/drivers/usb/gadget/f_mass_storage.c index 1ecb92a..cc3e4af 100644
> > --- a/drivers/usb/gadget/f_mass_storage.c
> > +++ b/drivers/usb/gadget/f_mass_storage.c
> > @@ -362,6 +362,7 @@ struct fsg_common {
> >  	char inquiry_string[8 + 16 + 4 + 1];
> >
> >  	struct kref		ref;
> > +	unsigned int controller_index;
> >  };
> >
> >  struct fsg_config {
> > @@ -691,7 +692,7 @@ static int sleep_thread(struct fsg_common *common)
> >  			k = 0;
> >  		}
> >
> > -		usb_gadget_handle_interrupts(0);
> > +
> > usb_gadget_handle_interrupts(common->controller_index); }
> >  	common->thread_wakeup_needed = 0;
> >  	return rc;
> > @@ -2406,6 +2407,11 @@ int fsg_main_thread(void *common_)  {
> >  	int ret;
> >  	struct fsg_common	*common = the_fsg_common;
> > +
> > +	/* update the controller_index */
> > +	if (common_)
> 
> Replace common_ with unsigned int index
> 

Will take care in v2.

> > +		common->controller_index = *(unsigned int *)common_;
> > +
> >  	/* The main loop */
> >  	do {
> >  		if (exception_in_progress(common)) { @@ -2476,6 +2482,7 @@ static
> > struct fsg_common *fsg_common_init(struct fsg_common *common,
> >  	common->ops = NULL;
> >  	common->private_data = NULL;
> > +	common->controller_index = 0;
> >
> >  	common->gadget = gadget;
> >  	common->ep0 = gadget->ep0;
> > @@ -2770,6 +2777,7 @@ int fsg_add(struct usb_configuration *c)
> >
> >  	fsg_common->ops = NULL;
> >  	fsg_common->private_data = NULL;
> > +	fsg_common->controller_index = 0;
> >
> >  	the_fsg_common = fsg_common;
> >
> 
> 
> 
> --
> Best regards,
> 
> Lukasz Majewski
> 
> Samsung R&D Institute Poland (SRPOL) | Linux Platform Group

[U-Boot] [PATCH 2/3] armv8/fsl-layerscape: add dwc3 gadget driver support

[Rajat Srivastava]

From: Rajesh Bhagat <rajesh.bhagat@nxp.com>

Implements the dwc3 gadget driver support for LS1043
platform, and performs below operations:
1. Enables snooping support for DWC3 controller.
2. Enables cache coherency in LS1043 platform.

Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
---
 arch/arm/cpu/armv8/fsl-layerscape/soc.c            | 87 +++++++++++++++++++++-
 .../include/asm/arch-fsl-layerscape/immap_lsch2.h  |  6 ++
 .../include/asm/arch-fsl-layerscape/sys_proto.h    | 11 +++
 drivers/usb/dwc3/core.c                            | 12 +++
 4 files changed, 114 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/sys_proto.h

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index 0fb5c7f..84b973d 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -17,6 +17,10 @@
 #ifdef CONFIG_CHAIN_OF_TRUST
 #include <fsl_validate.h>
 #endif
+#include <usb.h>
+#include <dwc3-uboot.h>
+#include <linux/usb/xhci-fsl.h>
+
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -318,9 +322,12 @@ void fsl_lsch2_early_init_f(void)
 #if defined(CONFIG_FSL_QSPI) && !defined(CONFIG_QSPI_BOOT)
 	out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
 #endif
-	/* Make SEC reads and writes snoopable */
+	/* Make SEC and USB reads and writes snoopable */
 	setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP |
-		     SCFG_SNPCNFGCR_SECWRSNP);
+		     SCFG_SNPCNFGCR_SECWRSNP | SCFG_SNPCNFGCR_USB1RDSNP |
+		     SCFG_SNPCNFGCR_USB1WRSNP | SCFG_SNPCNFGCR_USB2RDSNP |
+		     SCFG_SNPCNFGCR_USB2WRSNP | SCFG_SNPCNFGCR_USB3RDSNP |
+		     SCFG_SNPCNFGCR_USB3WRSNP);
 
 	/*
 	 * Enable snoop requests and DVM message requests for
@@ -336,6 +343,82 @@ void fsl_lsch2_early_init_f(void)
 }
 #endif
 
+#ifdef CONFIG_USB_DWC3
+
+#if defined(CONFIG_LS1043A)
+static struct dwc3_device dwc3_device_data0 = {
+	.maximum_speed = USB_SPEED_HIGH,
+	.base = CONFIG_SYS_FSL_XHCI_USB1_ADDR,
+	.dr_mode = USB_DR_MODE_PERIPHERAL,
+	.index = 0,
+};
+
+static struct dwc3_device dwc3_device_data1 = {
+	.maximum_speed = USB_SPEED_HIGH,
+	.base = CONFIG_SYS_FSL_XHCI_USB2_ADDR,
+	.dr_mode = USB_DR_MODE_PERIPHERAL,
+	.index = 1,
+};
+
+static struct dwc3_device dwc3_device_data2 = {
+	.maximum_speed = USB_SPEED_HIGH,
+	.base = CONFIG_SYS_FSL_XHCI_USB3_ADDR,
+	.dr_mode = USB_DR_MODE_PERIPHERAL,
+	.index = 2,
+};
+
+int usb_gadget_handle_interrupts(int index)
+{
+	dwc3_uboot_handle_interrupt(index);
+	return 0;
+}
+#endif
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+	switch (init) {
+	case USB_INIT_DEVICE:
+		switch (index) {
+#if defined(CONFIG_LS1043A)
+		case 0:
+			dwc3_uboot_init(&dwc3_device_data0);
+			break;
+
+		case 1:
+			dwc3_uboot_init(&dwc3_device_data1);
+			break;
+		case 2:
+			dwc3_uboot_init(&dwc3_device_data2);
+			break;
+#endif
+		default:
+			printf("Invalid Controller Index\n");
+			return -1;
+		}
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
+int board_usb_cleanup(int index, enum usb_init_type init)
+{
+	switch (init) {
+	case USB_INIT_DEVICE:
+#if defined(CONFIG_LS1043A)
+		dwc3_uboot_exit(index);
+#endif
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+#endif
+
+
+
 #ifdef CONFIG_BOARD_LATE_INIT
 int board_late_init(void)
 {
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
index 57b99d4..13ba1a6 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
@@ -328,6 +328,12 @@ struct ccsr_gur {
 
 #define SCFG_SNPCNFGCR_SECRDSNP		0x80000000
 #define SCFG_SNPCNFGCR_SECWRSNP		0x40000000
+#define SCFG_SNPCNFGCR_USB1RDSNP	0x00200000
+#define SCFG_SNPCNFGCR_USB1WRSNP	0x00100000
+#define SCFG_SNPCNFGCR_USB2RDSNP	0x00008000
+#define SCFG_SNPCNFGCR_USB2WRSNP	0x00010000
+#define SCFG_SNPCNFGCR_USB3RDSNP	0x00002000
+#define SCFG_SNPCNFGCR_USB3WRSNP	0x00004000
 
 /* Supplemental Configuration Unit */
 struct ccsr_scfg {
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/sys_proto.h b/arch/arm/include/asm/arch-fsl-layerscape/sys_proto.h
new file mode 100644
index 0000000..252c676
--- /dev/null
+++ b/arch/arm/include/asm/arch-fsl-layerscape/sys_proto.h
@@ -0,0 +1,11 @@
+/*
+ * Copyright 2016 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _ASM_ARMV8_FSL_LAYERSCAPE_SYS_PROTO_H_
+#define _ASM_ARMV8_FSL_LAYERSCAPE_SYS_PROTO_H_
+
+
+#endif /* _ASM_ARMV8_FSL_LAYERSCAPE_SYS_PROTO_H_ */
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 85cc96a..5eeb71d 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -690,6 +690,18 @@ int dwc3_uboot_init(struct dwc3_device *dwc3_dev)
 		return -ENOMEM;
 	}
 
+#if defined(CONFIG_LS1043A)
+	 /* Change burst beat and outstanding pipelined transfers requests */
+	dwc3_writel(dwc->regs, DWC3_GSBUSCFG0,
+		    (dwc3_readl(dwc->regs, DWC3_GSBUSCFG0) & ~0xff) | 0xf);
+	dwc3_writel(dwc->regs, DWC3_GSBUSCFG1,
+		    dwc3_readl(dwc->regs, DWC3_GSBUSCFG1) | 0xf00);
+
+	/* Enable snooping */
+	dwc3_writel(dwc->regs, DWC3_GSBUSCFG0,
+		    dwc3_readl(dwc->regs, DWC3_GSBUSCFG0) | 0x22220000);
+#endif
+
 	if (IS_ENABLED(CONFIG_USB_DWC3_HOST))
 		dwc->dr_mode = USB_DR_MODE_HOST;
 	else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET))
-- 
1.9.1

[U-Boot] [PATCH 2/3] armv8/fsl-layerscape: add dwc3 gadget driver support

[Marek Vasut]

On 05/31/2016 01:32 PM, Rajat Srivastava wrote:
> From: Rajesh Bhagat <rajesh.bhagat@nxp.com>
> 
> Implements the dwc3 gadget driver support for LS1043
> platform, and performs below operations:
> 1. Enables snooping support for DWC3 controller.
> 2. Enables cache coherency in LS1043 platform.
> 
> Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com>
> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
> ---
>  arch/arm/cpu/armv8/fsl-layerscape/soc.c            | 87 +++++++++++++++++++++-
>  .../include/asm/arch-fsl-layerscape/immap_lsch2.h  |  6 ++
>  .../include/asm/arch-fsl-layerscape/sys_proto.h    | 11 +++
>  drivers/usb/dwc3/core.c                            | 12 +++
>  4 files changed, 114 insertions(+), 2 deletions(-)
>  create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/sys_proto.h
> 
> diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c

Don't mix platform code with driver code, split this patch.

> index 0fb5c7f..84b973d 100644
> --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
> +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
> @@ -17,6 +17,10 @@
>  #ifdef CONFIG_CHAIN_OF_TRUST
>  #include <fsl_validate.h>
>  #endif
> +#include <usb.h>
> +#include <dwc3-uboot.h>
> +#include <linux/usb/xhci-fsl.h>
> +
>  
>  DECLARE_GLOBAL_DATA_PTR;
>  
> @@ -318,9 +322,12 @@ void fsl_lsch2_early_init_f(void)
>  #if defined(CONFIG_FSL_QSPI) && !defined(CONFIG_QSPI_BOOT)
>  	out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
>  #endif
> -	/* Make SEC reads and writes snoopable */
> +	/* Make SEC and USB reads and writes snoopable */
>  	setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP |
> -		     SCFG_SNPCNFGCR_SECWRSNP);
> +		     SCFG_SNPCNFGCR_SECWRSNP | SCFG_SNPCNFGCR_USB1RDSNP |
> +		     SCFG_SNPCNFGCR_USB1WRSNP | SCFG_SNPCNFGCR_USB2RDSNP |
> +		     SCFG_SNPCNFGCR_USB2WRSNP | SCFG_SNPCNFGCR_USB3RDSNP |
> +		     SCFG_SNPCNFGCR_USB3WRSNP);
>  
>  	/*
>  	 * Enable snoop requests and DVM message requests for
> @@ -336,6 +343,82 @@ void fsl_lsch2_early_init_f(void)
>  }
>  #endif
>  
> +#ifdef CONFIG_USB_DWC3
> +
> +#if defined(CONFIG_LS1043A)
> +static struct dwc3_device dwc3_device_data0 = {
> +	.maximum_speed = USB_SPEED_HIGH,
> +	.base = CONFIG_SYS_FSL_XHCI_USB1_ADDR,
> +	.dr_mode = USB_DR_MODE_PERIPHERAL,
> +	.index = 0,
> +};
> +
> +static struct dwc3_device dwc3_device_data1 = {
> +	.maximum_speed = USB_SPEED_HIGH,
> +	.base = CONFIG_SYS_FSL_XHCI_USB2_ADDR,
> +	.dr_mode = USB_DR_MODE_PERIPHERAL,
> +	.index = 1,
> +};
> +
> +static struct dwc3_device dwc3_device_data2 = {
> +	.maximum_speed = USB_SPEED_HIGH,
> +	.base = CONFIG_SYS_FSL_XHCI_USB3_ADDR,
> +	.dr_mode = USB_DR_MODE_PERIPHERAL,
> +	.index = 2,
> +};
> +
> +int usb_gadget_handle_interrupts(int index)
> +{
> +	dwc3_uboot_handle_interrupt(index);
> +	return 0;
> +}
> +#endif
> +
> +int board_usb_init(int index, enum usb_init_type init)
> +{
> +	switch (init) {
> +	case USB_INIT_DEVICE:
> +		switch (index) {
> +#if defined(CONFIG_LS1043A)
> +		case 0:
> +			dwc3_uboot_init(&dwc3_device_data0);
> +			break;
> +
> +		case 1:
> +			dwc3_uboot_init(&dwc3_device_data1);
> +			break;
> +		case 2:
> +			dwc3_uboot_init(&dwc3_device_data2);
> +			break;
> +#endif
> +		default:
> +			printf("Invalid Controller Index\n");
> +			return -1;
> +		}
> +		break;
> +	default:
> +		break;
> +	}
> +	return 0;
> +}
> +
> +int board_usb_cleanup(int index, enum usb_init_type init)
> +{
> +	switch (init) {
> +	case USB_INIT_DEVICE:
> +#if defined(CONFIG_LS1043A)
> +		dwc3_uboot_exit(index);
> +#endif
> +		break;
> +	default:
> +		break;
> +	}
> +	return 0;
> +}
> +#endif
> +
> +
> +
>  #ifdef CONFIG_BOARD_LATE_INIT
>  int board_late_init(void)
>  {
> diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
> index 57b99d4..13ba1a6 100644
> --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
> +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
> @@ -328,6 +328,12 @@ struct ccsr_gur {
>  
>  #define SCFG_SNPCNFGCR_SECRDSNP		0x80000000
>  #define SCFG_SNPCNFGCR_SECWRSNP		0x40000000
> +#define SCFG_SNPCNFGCR_USB1RDSNP	0x00200000
> +#define SCFG_SNPCNFGCR_USB1WRSNP	0x00100000
> +#define SCFG_SNPCNFGCR_USB2RDSNP	0x00008000
> +#define SCFG_SNPCNFGCR_USB2WRSNP	0x00010000
> +#define SCFG_SNPCNFGCR_USB3RDSNP	0x00002000
> +#define SCFG_SNPCNFGCR_USB3WRSNP	0x00004000
>  
>  /* Supplemental Configuration Unit */
>  struct ccsr_scfg {
> diff --git a/arch/arm/include/asm/arch-fsl-layerscape/sys_proto.h b/arch/arm/include/asm/arch-fsl-layerscape/sys_proto.h
> new file mode 100644
> index 0000000..252c676
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-fsl-layerscape/sys_proto.h
> @@ -0,0 +1,11 @@
> +/*
> + * Copyright 2016 Freescale Semiconductor
> + *
> + * SPDX-License-Identifier:	GPL-2.0+
> + */
> +
> +#ifndef _ASM_ARMV8_FSL_LAYERSCAPE_SYS_PROTO_H_
> +#define _ASM_ARMV8_FSL_LAYERSCAPE_SYS_PROTO_H_
> +
> +
> +#endif /* _ASM_ARMV8_FSL_LAYERSCAPE_SYS_PROTO_H_ */
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 85cc96a..5eeb71d 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -690,6 +690,18 @@ int dwc3_uboot_init(struct dwc3_device *dwc3_dev)
>  		return -ENOMEM;
>  	}
>  
> +#if defined(CONFIG_LS1043A)

How was this added in Linux ? I doubt such horrid ifdef was allowed.
I presume it went through either DT or struct dwc3_device, right ?
So fix this here the same way.

> +	 /* Change burst beat and outstanding pipelined transfers requests */
> +	dwc3_writel(dwc->regs, DWC3_GSBUSCFG0,
> +		    (dwc3_readl(dwc->regs, DWC3_GSBUSCFG0) & ~0xff) | 0xf);
> +	dwc3_writel(dwc->regs, DWC3_GSBUSCFG1,
> +		    dwc3_readl(dwc->regs, DWC3_GSBUSCFG1) | 0xf00);
> +
> +	/* Enable snooping */
> +	dwc3_writel(dwc->regs, DWC3_GSBUSCFG0,
> +		    dwc3_readl(dwc->regs, DWC3_GSBUSCFG0) | 0x22220000);
> +#endif
> +
>  	if (IS_ENABLED(CONFIG_USB_DWC3_HOST))
>  		dwc->dr_mode = USB_DR_MODE_HOST;
>  	else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET))
> 


-- 
Best regards,
Marek Vasut

[U-Boot] [PATCH 2/3] armv8/fsl-layerscape: add dwc3 gadget driver support

[Felipe Balbi]

Hi,

Marek Vasut <marex@denx.de> writes:
>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>> index 85cc96a..5eeb71d 100644
>> --- a/drivers/usb/dwc3/core.c
>> +++ b/drivers/usb/dwc3/core.c
>> @@ -690,6 +690,18 @@ int dwc3_uboot_init(struct dwc3_device *dwc3_dev)
>>  		return -ENOMEM;
>>  	}
>>  
>> +#if defined(CONFIG_LS1043A)
>
> How was this added in Linux ? I doubt such horrid ifdef was allowed.
> I presume it went through either DT or struct dwc3_device, right ?
> So fix this here the same way.

dwc3 doesn't have any of that. I wouldn't take it :-p

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 818 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160531/e0838818/attachment.sig>

[U-Boot] [PATCH 2/3] armv8/fsl-layerscape: add dwc3 gadget driver support

[Rajesh Bhagat]

> -----Original Message-----
> From: Felipe Balbi [mailto:felipe.balbi at linux.intel.com]
> Sent: Tuesday, May 31, 2016 5:40 PM
> To: Marek Vasut <marex@denx.de>; Rajat Srivastava <rajat.srivastava@nxp.com>;
> u-boot at lists.denx.de
> Cc: l.majewski at samsung.com; sjg at chromium.org; albert.u.boot at aribaud.net;
> prabhakar at freescale.com; york sun <york.sun@nxp.com>; Mingkai Hu
> <mingkai.hu@nxp.com>; Rajesh Bhagat <rajesh.bhagat@nxp.com>;
> michal.simek at xilinx.com
> Subject: Re: [PATCH 2/3] armv8/fsl-layerscape: add dwc3 gadget driver support
> 
> 
> Hi,
> 
> Marek Vasut <marex@denx.de> writes:
> >> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index
> >> 85cc96a..5eeb71d 100644
> >> --- a/drivers/usb/dwc3/core.c
> >> +++ b/drivers/usb/dwc3/core.c
> >> @@ -690,6 +690,18 @@ int dwc3_uboot_init(struct dwc3_device *dwc3_dev)
> >>  		return -ENOMEM;
> >>  	}
> >>
> >> +#if defined(CONFIG_LS1043A)
> >
> > How was this added in Linux ? I doubt such horrid ifdef was allowed.
> > I presume it went through either DT or struct dwc3_device, right ?
> > So fix this here the same way.
> 
> dwc3 doesn't have any of that. I wouldn't take it :-p
> 

Hello Felipe/Marek,

It is not currently added in Linux, These registers setting is required for 
Setting the burst beat transactions and enabling the snooping for DWC3 USB IP. 

Can it be added using dwc3 uboot glue layer e.g. dwc3-fsl.c ?

Best Regards,
Rajesh Bhagat 

> --
> balbi

[U-Boot] [PATCH 2/3] armv8/fsl-layerscape: add dwc3 gadget driver support

[Felipe Balbi]

Hi,

Rajesh Bhagat <rajesh.bhagat@nxp.com> writes:
>> Marek Vasut <marex@denx.de> writes:
>> >> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index
>> >> 85cc96a..5eeb71d 100644
>> >> --- a/drivers/usb/dwc3/core.c
>> >> +++ b/drivers/usb/dwc3/core.c
>> >> @@ -690,6 +690,18 @@ int dwc3_uboot_init(struct dwc3_device *dwc3_dev)
>> >>  		return -ENOMEM;
>> >>  	}
>> >>
>> >> +#if defined(CONFIG_LS1043A)
>> >
>> > How was this added in Linux ? I doubt such horrid ifdef was allowed.
>> > I presume it went through either DT or struct dwc3_device, right ?
>> > So fix this here the same way.
>> 
>> dwc3 doesn't have any of that. I wouldn't take it :-p
>> 
>
> Hello Felipe/Marek,
>
> It is not currently added in Linux, These registers setting is required for 
> Setting the burst beat transactions and enabling the snooping for DWC3 USB IP. 

that's fine, but you don't need to ifdef around that. Pass these values
from your platform code.

> Can it be added using dwc3 uboot glue layer e.g. dwc3-fsl.c ?

keep in core, but pass them from plat code instead of hardcoding under ifdef.

Also, get rid of the magic constant ;-)

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 818 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160601/53441d1c/attachment.sig>

[U-Boot] [PATCH 2/3] armv8/fsl-layerscape: add dwc3 gadget driver support

[Rajesh Bhagat]

> -----Original Message-----
> From: Felipe Balbi [mailto:felipe.balbi at linux.intel.com]
> Sent: Wednesday, June 01, 2016 12:07 PM
> To: Rajesh Bhagat <rajesh.bhagat@nxp.com>; Marek Vasut <marex@denx.de>;
> Rajat Srivastava <rajat.srivastava@nxp.com>; u-boot at lists.denx.de
> Cc: l.majewski at samsung.com; sjg at chromium.org; albert.u.boot at aribaud.net;
> prabhakar at freescale.com; york sun <york.sun@nxp.com>; Mingkai Hu
> <mingkai.hu@nxp.com>; michal.simek at xilinx.com
> Subject: RE: [PATCH 2/3] armv8/fsl-layerscape: add dwc3 gadget driver support
> 
> 
> Hi,
> 
> Rajesh Bhagat <rajesh.bhagat@nxp.com> writes:
> >> Marek Vasut <marex@denx.de> writes:
> >> >> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> >> >> index 85cc96a..5eeb71d 100644
> >> >> --- a/drivers/usb/dwc3/core.c
> >> >> +++ b/drivers/usb/dwc3/core.c
> >> >> @@ -690,6 +690,18 @@ int dwc3_uboot_init(struct dwc3_device *dwc3_dev)
> >> >>  		return -ENOMEM;
> >> >>  	}
> >> >>
> >> >> +#if defined(CONFIG_LS1043A)
> >> >
> >> > How was this added in Linux ? I doubt such horrid ifdef was allowed.
> >> > I presume it went through either DT or struct dwc3_device, right ?
> >> > So fix this here the same way.
> >>
> >> dwc3 doesn't have any of that. I wouldn't take it :-p
> >>
> >
> > Hello Felipe/Marek,
> >
> > It is not currently added in Linux, These registers setting is
> > required for Setting the burst beat transactions and enabling the snooping for DWC3
> USB IP.
> 
> that's fine, but you don't need to ifdef around that. Pass these values from your
> platform code.
> 
> > Can it be added using dwc3 uboot glue layer e.g. dwc3-fsl.c ?
> 
> keep in core, but pass them from plat code instead of hardcoding under ifdef.
> 
> Also, get rid of the magic constant ;-)
> 

Ok, thanks. Will take care in v2. 

> --
> balbi

[U-Boot] [PATCH 2/3] armv8/fsl-layerscape: add dwc3 gadget driver support

[Lukasz Majewski]

Hi Rajat,

> From: Rajesh Bhagat <rajesh.bhagat@nxp.com>
> 
> Implements the dwc3 gadget driver support for LS1043
> platform, and performs below operations:
> 1. Enables snooping support for DWC3 controller.
> 2. Enables cache coherency in LS1043 platform.
> 
> Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com>
> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
> ---
>  arch/arm/cpu/armv8/fsl-layerscape/soc.c            | 87
> +++++++++++++++++++++- .../include/asm/arch-fsl-layerscape/immap_lsch2.h
> |  6 ++ .../include/asm/arch-fsl-layerscape/sys_proto.h    | 11 +++
>  drivers/usb/dwc3/core.c                            | 12 +++
>  4 files changed, 114 insertions(+), 2 deletions(-)
>  create mode 100644
> arch/arm/include/asm/arch-fsl-layerscape/sys_proto.h
> 
> diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
> b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index 0fb5c7f..84b973d
> 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
> +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
> @@ -17,6 +17,10 @@
>  #ifdef CONFIG_CHAIN_OF_TRUST
>  #include <fsl_validate.h>
>  #endif
> +#include <usb.h>
> +#include <dwc3-uboot.h>
> +#include <linux/usb/xhci-fsl.h>
> +
>  
>  DECLARE_GLOBAL_DATA_PTR;
>  
> @@ -318,9 +322,12 @@ void fsl_lsch2_early_init_f(void)
>  #if defined(CONFIG_FSL_QSPI) && !defined(CONFIG_QSPI_BOOT)
>  	out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
>  #endif
> -	/* Make SEC reads and writes snoopable */
> +	/* Make SEC and USB reads and writes snoopable */
>  	setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP |
> -		     SCFG_SNPCNFGCR_SECWRSNP);
> +		     SCFG_SNPCNFGCR_SECWRSNP |
> SCFG_SNPCNFGCR_USB1RDSNP |
> +		     SCFG_SNPCNFGCR_USB1WRSNP |
> SCFG_SNPCNFGCR_USB2RDSNP |
> +		     SCFG_SNPCNFGCR_USB2WRSNP |
> SCFG_SNPCNFGCR_USB3RDSNP |
> +		     SCFG_SNPCNFGCR_USB3WRSNP);
>  
>  	/*
>  	 * Enable snoop requests and DVM message requests for
> @@ -336,6 +343,82 @@ void fsl_lsch2_early_init_f(void)
>  }
>  #endif
>  
> +#ifdef CONFIG_USB_DWC3
> +
> +#if defined(CONFIG_LS1043A)
> +static struct dwc3_device dwc3_device_data0 = {
> +	.maximum_speed = USB_SPEED_HIGH,
> +	.base = CONFIG_SYS_FSL_XHCI_USB1_ADDR,
> +	.dr_mode = USB_DR_MODE_PERIPHERAL,
> +	.index = 0,
> +};
> +
> +static struct dwc3_device dwc3_device_data1 = {
> +	.maximum_speed = USB_SPEED_HIGH,
> +	.base = CONFIG_SYS_FSL_XHCI_USB2_ADDR,
> +	.dr_mode = USB_DR_MODE_PERIPHERAL,
> +	.index = 1,
> +};
> +
> +static struct dwc3_device dwc3_device_data2 = {
> +	.maximum_speed = USB_SPEED_HIGH,
> +	.base = CONFIG_SYS_FSL_XHCI_USB3_ADDR,
> +	.dr_mode = USB_DR_MODE_PERIPHERAL,
> +	.index = 2,
> +};
> +
> +int usb_gadget_handle_interrupts(int index)
> +{
> +	dwc3_uboot_handle_interrupt(index);
> +	return 0;
> +}
> +#endif
> +
> +int board_usb_init(int index, enum usb_init_type init)
> +{
> +	switch (init) {
> +	case USB_INIT_DEVICE:
> +		switch (index) {
> +#if defined(CONFIG_LS1043A)
> +		case 0:
> +			dwc3_uboot_init(&dwc3_device_data0);
> +			break;
> +
> +		case 1:
> +			dwc3_uboot_init(&dwc3_device_data1);
> +			break;
> +		case 2:
> +			dwc3_uboot_init(&dwc3_device_data2);
> +			break;
> +#endif
> +		default:
> +			printf("Invalid Controller Index\n");
> +			return -1;
> +		}
> +		break;
> +	default:
> +		break;
> +	}
> +	return 0;
> +}
> +
> +int board_usb_cleanup(int index, enum usb_init_type init)
> +{
> +	switch (init) {
> +	case USB_INIT_DEVICE:
> +#if defined(CONFIG_LS1043A)
> +		dwc3_uboot_exit(index);
> +#endif
> +		break;
> +	default:
> +		break;
> +	}
> +	return 0;
> +}
> +#endif
> +
> +
> +
>  #ifdef CONFIG_BOARD_LATE_INIT
>  int board_late_init(void)
>  {
> diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
> b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h index
> 57b99d4..13ba1a6 100644 ---
> a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h +++
> b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h @@ -328,6
> +328,12 @@ struct ccsr_gur { 
>  #define SCFG_SNPCNFGCR_SECRDSNP		0x80000000
>  #define SCFG_SNPCNFGCR_SECWRSNP		0x40000000
> +#define SCFG_SNPCNFGCR_USB1RDSNP	0x00200000
> +#define SCFG_SNPCNFGCR_USB1WRSNP	0x00100000
> +#define SCFG_SNPCNFGCR_USB2RDSNP	0x00008000
> +#define SCFG_SNPCNFGCR_USB2WRSNP	0x00010000
> +#define SCFG_SNPCNFGCR_USB3RDSNP	0x00002000
> +#define SCFG_SNPCNFGCR_USB3WRSNP	0x00004000
>  
>  /* Supplemental Configuration Unit */
>  struct ccsr_scfg {
> diff --git a/arch/arm/include/asm/arch-fsl-layerscape/sys_proto.h
> b/arch/arm/include/asm/arch-fsl-layerscape/sys_proto.h new file mode
> 100644 index 0000000..252c676
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-fsl-layerscape/sys_proto.h
> @@ -0,0 +1,11 @@
> +/*
> + * Copyright 2016 Freescale Semiconductor
> + *
> + * SPDX-License-Identifier:	GPL-2.0+
> + */
> +
> +#ifndef _ASM_ARMV8_FSL_LAYERSCAPE_SYS_PROTO_H_
> +#define _ASM_ARMV8_FSL_LAYERSCAPE_SYS_PROTO_H_
> +
> +
> +#endif /* _ASM_ARMV8_FSL_LAYERSCAPE_SYS_PROTO_H_ */
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 85cc96a..5eeb71d 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -690,6 +690,18 @@ int dwc3_uboot_init(struct dwc3_device *dwc3_dev)
>  		return -ENOMEM;
>  	}
>  
> +#if defined(CONFIG_LS1043A)
> +	 /* Change burst beat and outstanding pipelined transfers
> requests */
> +	dwc3_writel(dwc->regs, DWC3_GSBUSCFG0,
> +		    (dwc3_readl(dwc->regs, DWC3_GSBUSCFG0) & ~0xff)
> | 0xf);
> +	dwc3_writel(dwc->regs, DWC3_GSBUSCFG1,
> +		    dwc3_readl(dwc->regs, DWC3_GSBUSCFG1) | 0xf00);
> +
> +	/* Enable snooping */
> +	dwc3_writel(dwc->regs, DWC3_GSBUSCFG0,
> +		    dwc3_readl(dwc->regs, DWC3_GSBUSCFG0) |
> 0x22220000); +#endif
> +
>  	if (IS_ENABLED(CONFIG_USB_DWC3_HOST))
>  		dwc->dr_mode = USB_DR_MODE_HOST;
>  	else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET))

Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>

-- 
Best regards,

Lukasz Majewski

Samsung R&D Institute Poland (SRPOL) | Linux Platform Group

[U-Boot] [PATCH 3/3] armv8/fsl-layerscape: enable dwc3 gadget driver support

[Rajat Srivastava]

From: Rajesh Bhagat <rajesh.bhagat@nxp.com>

Enables dwc3 gadget driver support on LS1043QDS platform.

Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
---
 include/configs/ls1043aqds.h | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index af1f73d..8c99641 100644
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@@ -394,6 +394,21 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		3
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	2
 #define CONFIG_USB_STORAGE
+
+#define CONFIG_USB_DWC3
+#define CONFIG_USB_DWC3_GADGET
+
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
+#define CONFIG_USB_GADGET_DOWNLOAD
+#define CONFIG_USB_GADGET_VBUS_DRAW 2
+#define CONFIG_G_DNL_MANUFACTURER "NXP Semiconductor"
+#define CONFIG_G_DNL_VENDOR_NUM 0x0471
+#define CONFIG_G_DNL_PRODUCT_NUM 0x1234
+#define CONFIG_USB_GADGET_DUALSPEED
+
+/* USB Gadget ums command */
+#define CONFIG_CMD_USB_MASS_STORAGE
 #endif
 
 /*
-- 
1.9.1