From: Mattijs Korpershoek <mkorpershoek@baylibre.com>
To: Svyatoslav Ryhel <clamor95@gmail.com>,
Simon Glass <sjg@chromium.org>, Lukasz Majewski <lukma@denx.de>,
Marek Vasut <marex@denx.de>,
Joe Hershberger <joe.hershberger@ni.com>,
Ramon Fried <rfried.dev@gmail.com>, Bin Meng <bmeng@tinylab.org>,
Ion Agorria <ion@agorria.com>,
Svyatoslav Ryhel <clamor95@gmail.com>,
Heinrich Schuchardt <xypron.glpk@gmx.de>,
Harald Seiler <hws@denx.de>,
Sean Anderson <sean.anderson@seco.com>,
Heiko Schocher <hs@denx.de>,
Dmitrii Merkurev <dimorinny@google.com>,
Patrick Delaunay <patrick.delaunay@foss.st.com>,
Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Cc: u-boot@lists.denx.de
Subject: Re: [PATCH v2 1/5] fastboot: multiresponse support
Date: Tue, 21 Nov 2023 10:25:20 +0100 [thread overview]
Message-ID: <877cmbmpa7.fsf@baylibre.com> (raw)
In-Reply-To: <20231115153836.16537-2-clamor95@gmail.com>
Hi Svyatoslav,
Thank you for the patch.
On mer., nov. 15, 2023 at 17:38, Svyatoslav Ryhel <clamor95@gmail.com> wrote:
> From: Ion Agorria <ion@agorria.com>
>
> Currently u-boot fastboot can only send one message back to host,
> so if there is a need to print more than one line messages must be
> kept sending until all the required data is obtained. This behavior
> can be adjusted using multiresponce ability (getting multiple lines
> of response) proposed in this patch.
>
> Signed-off-by: Ion Agorria <ion@agorria.com>
> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
> ---
> drivers/fastboot/fb_command.c | 10 ++++++++++
> drivers/usb/gadget/f_fastboot.c | 29 +++++++++++++++++++++++++++++
> include/fastboot.h | 18 ++++++++++++++++++
> net/fastboot_udp.c | 29 +++++++++++++++++++++++------
> 4 files changed, 80 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/fastboot/fb_command.c b/drivers/fastboot/fb_command.c
> index 5fcadcdf50..ab72d8c781 100644
> --- a/drivers/fastboot/fb_command.c
> +++ b/drivers/fastboot/fb_command.c
> @@ -5,6 +5,7 @@
>
> #include <common.h>
> #include <command.h>
> +#include <console.h>
> #include <env.h>
> #include <fastboot.h>
> #include <fastboot-internal.h>
> @@ -152,6 +153,15 @@ int fastboot_handle_command(char *cmd_string, char *response)
> return -1;
> }
>
> +void fastboot_multiresponse(int cmd, char *response)
> +{
> + switch (cmd) {
> + default:
> + fastboot_fail("Unknown multiresponse command", response);
> + break;
> + }
> +}
> +
> /**
> * okay() - Send bare OKAY response
> *
> diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
> index 741775a7bc..0850350331 100644
> --- a/drivers/usb/gadget/f_fastboot.c
> +++ b/drivers/usb/gadget/f_fastboot.c
> @@ -497,6 +497,25 @@ static void do_bootm_on_complete(struct usb_ep *ep, struct usb_request *req)
> do_exit_on_complete(ep, req);
> }
>
> +static int multiresponse_cmd = -1;
> +static void multiresponse_on_complete(struct usb_ep *ep, struct usb_request *req)
> +{
> + char response[FASTBOOT_RESPONSE_LEN] = {0};
> +
> + if (multiresponse_cmd == -1)
> + return;
> +
> + /* Call handler to obtain next response */
> + fastboot_multiresponse(multiresponse_cmd, response);
> + fastboot_tx_write_str(response);
> +
> + /* If response is final OKAY/FAIL response disconnect this handler and unset cmd */
> + if (!strncmp("OKAY", response, 4) || !strncmp("FAIL", response, 4)) {
> + multiresponse_cmd = -1;
> + fastboot_func->in_req->complete = fastboot_complete;
> + }
> +}
> +
> static void do_acmd_complete(struct usb_ep *ep, struct usb_request *req)
> {
> /* When usb dequeue complete will be called
> @@ -524,6 +543,16 @@ static void rx_handler_command(struct usb_ep *ep, struct usb_request *req)
> fastboot_fail("buffer overflow", response);
> }
>
> + if (!strncmp(FASTBOOT_MULTIRESPONSE_START, response, 4)) {
> + multiresponse_cmd = cmd;
> + fastboot_multiresponse(multiresponse_cmd, response);
> +
> + /* Only add complete callback if first is not a final OKAY/FAIL response */
> + if (strncmp("OKAY", response, 4) && strncmp("FAIL", response, 4)) {
> + fastboot_func->in_req->complete = multiresponse_on_complete;
> + }
> + }
> +
> if (!strncmp("DATA", response, 4)) {
> req->complete = rx_handler_dl_image;
> req->length = rx_bytes_expected(ep);
> diff --git a/include/fastboot.h b/include/fastboot.h
> index 296451f89d..59cbea61ec 100644
> --- a/include/fastboot.h
> +++ b/include/fastboot.h
> @@ -14,6 +14,16 @@
>
> #define FASTBOOT_VERSION "0.4"
>
> +/*
> + * Signals u-boot fastboot code to send multiple responses by
> + * calling response generating function repeatedly until a OKAY/FAIL
> + * is generated as final response.
> + *
> + * This status code is only used internally to signal, must NOT
> + * be sent to host.
> + */
> +#define FASTBOOT_MULTIRESPONSE_START ("MORE")
> +
> /* The 64 defined bytes plus \0 */
> #define FASTBOOT_COMMAND_LEN (64 + 1)
> #define FASTBOOT_RESPONSE_LEN (64 + 1)
> @@ -172,5 +182,13 @@ void fastboot_data_download(const void *fastboot_data,
> */
> void fastboot_data_complete(char *response);
>
> +/**
> + * fastboot_handle_multiresponse() - Called for each response to send
> + *
> + * @cmd: Command id that requested multiresponse
> + * @response: Pointer to fastboot response buffer
> + */
> +void fastboot_multiresponse(int cmd, char *response);
> +
> void fastboot_acmd_complete(void);
> #endif /* _FASTBOOT_H_ */
> diff --git a/net/fastboot_udp.c b/net/fastboot_udp.c
> index d690787478..6fee441ab3 100644
> --- a/net/fastboot_udp.c
> +++ b/net/fastboot_udp.c
> @@ -42,16 +42,15 @@ static int fastboot_remote_port;
> static int fastboot_our_port;
>
> /**
> - * fastboot_udp_send_info() - Send an INFO packet during long commands.
> + * fastboot_udp_send_response() - Send an response into UDP
> *
> - * @msg: String describing the reason for waiting
> + * @response: Response to send
> */
> -static void fastboot_udp_send_info(const char *msg)
> +static void fastboot_udp_send_response(const char *response)
> {
> uchar *packet;
> uchar *packet_base;
> int len = 0;
> - char response[FASTBOOT_RESPONSE_LEN] = {0};
>
> struct fastboot_header response_header = {
> .id = FASTBOOT_FASTBOOT,
> @@ -66,7 +65,6 @@ static void fastboot_udp_send_info(const char *msg)
> memcpy(packet, &response_header, sizeof(response_header));
> packet += sizeof(response_header);
> /* Write response */
> - fastboot_response("INFO", response, "%s", msg);
> memcpy(packet, response, strlen(response));
> packet += strlen(response);
>
> @@ -91,6 +89,7 @@ static void fastboot_udp_send_info(const char *msg)
> static void fastboot_timed_send_info(const char *msg)
> {
> static ulong start;
> + char response[FASTBOOT_RESPONSE_LEN] = {0};
>
> /* Initialize timer */
> if (start == 0)
> @@ -99,7 +98,8 @@ static void fastboot_timed_send_info(const char *msg)
> /* Send INFO packet to host every 30 seconds */
> if (time >= 30000) {
> start = get_timer(0);
> - fastboot_udp_send_info(msg);
> + fastboot_response("INFO", response, "%s", msg);
> + fastboot_udp_send_response(response);
> }
> }
>
> @@ -180,6 +180,23 @@ static void fastboot_send(struct fastboot_header header, char *fastboot_data,
> } else {
> cmd = fastboot_handle_command(command, response);
> pending_command = false;
> +
> + if (!strncmp(FASTBOOT_MULTIRESPONSE_START, response, 4)) {
> + while (1) {
> + /* Call handler to obtain next response */
> + fastboot_multiresponse(cmd, response);
> +
> + /*
> + * Send more responses or break to send
> + * final OKAY/FAIL response
> + */
> + if (strncmp("OKAY", response, 4) &&
> + strncmp("FAIL", response, 4))
> + fastboot_udp_send_response(response);
> + else
> + break;
> + }
> + }
> }
> /*
> * Sent some INFO packets, need to update sequence number in
> --
> 2.40.1
next prev parent reply other threads:[~2023-11-21 9:25 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-15 15:38 [PATCH v2 0/5] Implement fastboot multiresponce Svyatoslav Ryhel
2023-11-15 15:38 ` [PATCH v2 1/5] fastboot: multiresponse support Svyatoslav Ryhel
2023-11-21 9:25 ` Mattijs Korpershoek [this message]
2023-11-15 15:38 ` [PATCH v2 2/5] fastboot: implement "getvar all" Svyatoslav Ryhel
2023-11-21 13:53 ` Mattijs Korpershoek
2023-11-15 15:38 ` [PATCH v2 3/5] common: console: introduce overflow and isempty calls Svyatoslav Ryhel
2023-11-21 10:27 ` Mattijs Korpershoek
2023-11-15 15:38 ` [PATCH v2 4/5] lib: membuff: fix readline not returning line in case of overflow Svyatoslav Ryhel
2023-11-21 10:29 ` Mattijs Korpershoek
2023-12-27 17:48 ` Simon Glass
2023-11-15 15:38 ` [PATCH v2 5/5] fastboot: add oem console command support Svyatoslav Ryhel
2023-11-21 10:35 ` Mattijs Korpershoek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=877cmbmpa7.fsf@baylibre.com \
--to=mkorpershoek@baylibre.com \
--cc=bmeng@tinylab.org \
--cc=clamor95@gmail.com \
--cc=dimorinny@google.com \
--cc=hs@denx.de \
--cc=hws@denx.de \
--cc=ion@agorria.com \
--cc=joe.hershberger@ni.com \
--cc=lukma@denx.de \
--cc=marex@denx.de \
--cc=matthias.schiffer@ew.tq-group.com \
--cc=patrick.delaunay@foss.st.com \
--cc=rfried.dev@gmail.com \
--cc=sean.anderson@seco.com \
--cc=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
--cc=xypron.glpk@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox