[U-Boot-Users] U-boot fails with new versatile PB (lead-free version)

[T S Rajesh <tsrajesh.indian@gmail.com>]

A bit more info..

When i type "List Area" from the boot monitor code, i get

Base			Area Size		Blocks		Block Size
---------			---------------		------------		----------------
0x34000000		256k		4		64k
0x34040000		65280k		255		256k
0x30000000		256k		4		64k
0x30040000		65280k		255		256k

whereas in the older boards, i used to get 

Base			Area Size		Blocks		Block Size
---------			---------------		------------		----------------
0x34000000		64M		256		256k

Thanks & Regards
Rajesh


T S Rajesh wrote:
> 
> Hi All,
> 
> I tried with the latest versatile PB926EJ-S (Lead Free Version). The
> failure i get is:
> 	DRAM:	0kb
> 	Flash: 	0kb
> Whereas in the old boards, it used to say 
> 	DRAM:	0kb
> 	Flash: 	64M
> 
> And after that, in the new board, when I try to do a saveenv, it fails
> with a 
> "start/end address not on sector boundary".
> The same image works perfectly in the older boards (purchased last year).
> Anyone came across this problems? Any help on this is greatly appreciated.
> 
> Thanks & Regards
> Rajesh
> 

-- 
View this message in context: http://www.nabble.com/U-boot-fails-with-new-versatile-PB-%28lead-free-version%29-tf3166145.html#a8783212
Sent from the Uboot - Users mailing list archive at Nabble.com.