From mboxrd@z Thu Jan 1 00:00:00 1970 From: T S Rajesh Date: Sat, 3 Feb 2007 07:35:01 -0800 (PST) Subject: [U-Boot-Users] U-boot fails with new versatile PB (lead-free version) In-Reply-To: <8783067.post@talk.nabble.com> References: <8783067.post@talk.nabble.com> Message-ID: <8783212.post@talk.nabble.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de A bit more info.. When i type "List Area" from the boot monitor code, i get Base Area Size Blocks Block Size --------- --------------- ------------ ---------------- 0x34000000 256k 4 64k 0x34040000 65280k 255 256k 0x30000000 256k 4 64k 0x30040000 65280k 255 256k whereas in the older boards, i used to get Base Area Size Blocks Block Size --------- --------------- ------------ ---------------- 0x34000000 64M 256 256k Thanks & Regards Rajesh T S Rajesh wrote: > > Hi All, > > I tried with the latest versatile PB926EJ-S (Lead Free Version). The > failure i get is: > DRAM: 0kb > Flash: 0kb > Whereas in the old boards, it used to say > DRAM: 0kb > Flash: 64M > > And after that, in the new board, when I try to do a saveenv, it fails > with a > "start/end address not on sector boundary". > The same image works perfectly in the older boards (purchased last year). > Anyone came across this problems? Any help on this is greatly appreciated. > > Thanks & Regards > Rajesh > -- View this message in context: http://www.nabble.com/U-boot-fails-with-new-versatile-PB-%28lead-free-version%29-tf3166145.html#a8783212 Sent from the Uboot - Users mailing list archive at Nabble.com.