[U-Boot-Users] u-boot dos not autostart commands

["Markus Klotzbücher" <mk@denx.de>]

Alexei Babich <a.babich@rez.ru> writes:

> I have PXA270 board with embedded by vendor bootleader - "U-Boot 1.3.0".
> I define that environment:
> ---
> $ printenv
> baudrate=115200
> bootdelay=3
> bootargs=video=pxafb:mode:800x480-16,active,pixclock:37000,left:100,right:1,hsynclen:10,upper:20,lower:1,vsynclen:10,outputen:1,pixclockpol:0 root=/dev/sda1 rootdelay=20 console=ttyS0,115200
> bootcmd=cp.b 01e00000 a1000000 13216e

What are you trying to do here?

...

> But after power on, I cannot see countdown & run bootcmd.
> If I 'run bootcmd' by hand - that works OK. But not automatically after power on.
> Can anybody tell me, how I can solve this ?

It seems that support for bootdelay (CONFIG_BOOTDELAY) is not enabled in
your vendors version of U-Boot. So to get this feature you will have to
compile a new U-Boot.

Best regards

Markus Klotzbuecher

--
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de